In this paper we present a new architecture for audio Analog-to-Digital Converters (ADCs) that includes a Built-In Self-Test (BIST) technique for the test of the Signal-to-Noise and Distortion Ratio (SNDR). A periodical binary stream is generated in the chip in order to stimulate the converter. The reuse of the bandgap circuit already existing in the converter allows us to generate the test stimulus with a very small analog area overhead. The output response analysis is performed by means of a sinewave fitting algorithm. The reuse of the digital filter already existing in the converter allows us to generate a synchronized reference signal necessary for the fitting algorithm. The BIST technique is equivalent to a standard test carried out with a sinusoidal signal at -12 decibels Full-Scale (dBFS). The total test time is 60 ms and the estimated BIST overhead area is 7.5% of the whole stereo converter area in a 0.13 µm CMOS technology. Experimental results show that the correlation between the embedded self-test and a sinusoidal standard test is excellent, with a SNDR error smaller than 1 dB.
IntroductionIn order to satisfy the rising demand for high quality audio devices, the performances of Sigma-Delta Analog-toDigital Converters (Σ∆ ADCs) are continuously improving with larger modulator bandwidths and higher dynamic ranges. As the performances of these circuits increase, its test is in turn more difficult and costly. Built-In Self-Test (BIST) techniques can reduce this cost by integrating the test approach in the design phase.In the last years, an intense research effort has been carried out in order to find BIST solutions for ADCs. The Oscillation-based Built-In Self-Test (OBIST) was proposed in [1] for the calculation of the input transition voltages and non-linearity errors. The main advantage of this method is that we do not need to generate an analog input stimulus for the test. However, it does not measure dynamic parameters and it takes a long test time for high-resolution converters. The oscillation-based BIST has also been applied to the test of Σ∆ modulators [2], where the modulator is reconfigured to be an oscillator. Both the frequency and the amplitude of the oscillation are measured in order to separate faulty-circuits from faultfree ones. The need to modify the circuit and the sensibility to process variations can deteriorate the quality of this BIST approach.Other authors [3,4,5,6] have proposed the estimation of the leakage in the modulator integrators, which is directly related to the quantization noise present in the bandwidth of the modulator at its output. Additionally, the same approach is used in [6] for the estimation of the settlingtime. These approaches do not allow for a complete validation of the modulator and additional tests may be necessary. Furthermore, in [3] and [4] large digital resources are required.The histogram-based technique has also been applied to the BIST of ADCs in [7]. However, only static information is obtained and long test times are necessary when the number of ...
This paper introduces a Computer-Aided-Test platform that has been developed for the evaluation of test techniques for analogue and mixed-signal circuits. The CAT platform, integrated in the Cadence Design Framework Environment, includes tools for fault simulation, test generation and test optimization for these types of circuits. Fault modeling and fault injection are simulator independent, which makes this approach flexible with respect to past approaches. In this paper, the use of this platform is illustrated for test optimization for the case of a fully differential amplifier. Test limits are set using a statistical circuit performance analysis that accounts for process deviations, as a trade-off between estimated test metrics at the design stage. Specification-based tests are next optimized in terms of their capability of detecting catastrophic and parametric faults.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.