No abstract

Background:The goal of this research was to measure the age-sex standardized prevalence of pre-diabetes (pre-DM) and diabetes (DM), and the effectiveness of diabetes management (using HbA1C as the indicator) in an urban area in Iran. Methods: Using a randomized cluster household survey, we recruited 5900 individuals whose age ranged from 15 to 75 from Kerman for assessing coronary artery disease risk factors (KERCADRS) including diabetes. In 2010 and 2011, all of the participants were interviewed by trained staff for medical history and physical activities, and were then examined for blood pressure and anthropometric measures. Venus blood sample was also collected for fasting plasma glucose and HbA1c. Results: The age-sex standardized prevalence of pre-diabetes, diagnosed and undiagnosed was 18.7%, 6.3% and 2.7%, respectively. Diabetes increased by age (from 14.7% in the 15-24 years old group to 28.4% in the 65-75 years old group), particularly after 40 years. Occasional opium users had the highest prevalence of Pre-DM (34.6%). Seventy-nine percent of the depressed and 75.5% of the anxious participants with diagnosed-DM were identified as uncontrolled-DM. More than 60% of diagnosed diabetic cases had impaired HbA1c. Overweight and obesity (adjusted odds ratio (AOR) 1.6) and low physical activity (AOR 1.5) were the most preventable risk factors associated with diabetes. Conclusion: Considerable prevalence of diabetes, susceptibility in progressing to diabetes and uncontrolled diabetes among individuals living in Kerman, suggested ineffective prevention and treatment of diabetes in urban areas in Iran. Successful experience regarding primary health-care in rural areas should be expanded to urban settings.

Paraquat (PQ) poisoning is the main medical problem in developing countries and it is spread out worldwide. A similar structure of PQ to MPP+ (1-methyl-4-phenylpyridinium) caused PQ-induced neurotoxicity and injury to renal proximal tubules.

The current work deals with fabrication and validation of a new highly Fe3+ selective sensor based on benzo-18-crown-6 (b-18C6) using the potentiometric method. The proposed sensor revealed satisfactory performance for quantitative evaluation of Fe3+ trace amount in environmental samples. The ratio of membrane ingredients optimized and the membrane with the composition of 4:30:65.5:0.5 mg of b-18C6:PVC:o-NPOE:KTpClPB exhibited the desirable Nernstian slope of 19.51 ± 0.10 (mV per decade of activity) over the pH range from 2.5 to 5.7 with an acceptable dynamic concentration range of 1.0 × 10−6 M to 1.0 × 10−1 M and lower detection limit of 8.0 × 10−7 M. The proposed sensor demonstrated an appropriate reproducibility with a rapid response time of 12 s and the suitable lifetime of 10 weeks. To validate the accurate response of the proposed sensor, AAS technique applied for the determination of Fe3+ in real aqueous mediums such as drinking tap water and hospital wastewater sample after treatment by electrocoagulation process. Theoretical studies carried out using DFT/B3LYP computational level with 6-311G basis set to optimize the adsorption sites of Fe+3 cationic species by b-18C6. The obtained adsorption energy with large negative value confirmed the formation of a stable complex.

No abstract

Novel ionophores comprising various hydroxide and amine structures were immobilized onto poly(vinyl chloride) (PVC) matrices, and these were examined to determine Ti(III) selectivity. To predict the selectivity of Ti(III), a PVC membrane was used to investigate the binding of Ti(III) to c-methylcalix[4]resorcinarene (CMCR). The study showed that the chelating ligand, CMCR, was coordinated selectively to Ti(III) at eight coordination sites involving the oxygen atoms at the interface of the membrane/solution. The membrane was prepared, based on CMCR as an ionophore, sodium tetrakis(4-fluorophenyl) borate (NaTFPB) as a lipophilic ionic additive, and dioctylphthalate (DOP) as a plasticizer. The immobilization of the ionophore and surface characterization studies revealed that the performance of CMCR-immobilized PVC was equivalent to that of mobile ionophores in supported liquid membranes (SLMs). The strengths of the ion-ionophore (CMCR-Ti(OH)(OH2)52+) interactions and the role of ionophores on membranes were studied via UV-Vis, Fourier transform infrared spectroscopy (FT–IR), scanning electron microscopy (SEM) and and X-ray diffraction (XRD).

No abstract

The introduction of low detection limit ion selective electrodes (ISEs) may well pave the way for the determination of trace targets of cationic compounds. This research focuses on the detection of titanium (III) cation using a new PVC-membrane sensor based on synthesized tris(2pyridyl) methylamine (tpm) ionophore. The application and validation of the proposed sensor was done using potentiometric titration, inductively coupled plasma atomic emission spectrometry (ICP-AES), and atomic absorption spectrometry (AAS). The membrane sensor exhibited a Nernstian response to the titanium (III) cation over a concentration range of 1.0 × 10−6–1.0 × 10−2 M and pH range from 1–2.5. The Nernstian slope, the lower of detection (LOD), and the response time (t95%) of the proposed sensor were 29.17 ± 0.24 mV/dec, 7.9 × 10−7 M, and 20 s, respectively. The direct determination of 4–39 μg/ml of titanium (III) standard solution showed an average recovery of 94.60 and a mean relative standard deviation of 1.8 at 100.0 μg/ml. Finally, the utilization of the electrodes as end-point indicators for potentiometric titration with EDTA solutions for titanium (III) sensor was successfully carried out.