An attractive option for tissue engineering is to use of multicellular spheroids as microtissues, particularly with stem cell spheroids. Conventional approaches of fabricating spheroids suffer from low throughput and polydispersity in size, and fail to supplement cues from extracellular matrix (ECM) for enhanced differentiation. In this study, we report the application of microfluidics-generated water-in-oil-in-water (w/o/w) double-emulsion (DE) droplets as pico-liter sized bioreactor for rapid cell assembly and well-controlled microenvironment for spheroid culture. Cells aggregated to form size-controllable (30–80 μm) spheroids in DE droplets within 150 min and could be retrieved via a droplet-releasing agent. Moreover, precursor hydrogel solution can be adopted as the inner phase to produce spheroid-encapsulated microgels after spheroid formation. As an example, the encapsulation of human mesenchymal stem cells (hMSC) spheroids in alginate and alginate-arginine-glycine-aspartic acid (-RGD) microgel was demonstrated, with enhanced osteogenic differentiation further exhibited in the latter case.

No abstract

No abstract

Biocompatible, biodegradable, and solid‐state electrolyte‐based organic transistors are demonstrated. As the electrolyte is composed of all edible materials, which are levan polysaccharide and choline‐based ionic liquid, the organic transistor fabricated on the electrolyte can be biocompatible and biodegrable. Compared to the other ion gel based electrolytes, it has superior electrical and mechanical properties, large specific capacitance (≈40 µF cm−2), non‐volatility, flexibility, and high transparency. Thus, it shows mechanical reliability by maintaining electrical performances under up to 1.11% of effective bending strain, 5% of stretching, and have low operation voltage range when it is utilized in organic transistors. Moreover, the biodegradable electrolyte‐based organic transistors can be applied to bio‐integrated devices, such as electrocardiogram (ECG) recordings on human skin and the heart of a rat. The measured ECG signals from the transistors, compared to signals from electrode‐based sensors, has a superior signal‐to‐noise ratio. The biocompatible and biodegradable materials and devices can contribute to the development of many bioelectronics.

A soft and very elastic poly(lactide-co-epsilon-caprolactone) (PLCL)(50:50, Mn 185 x 10(3)) was synthesized. Tubular scaffolds were prepared by an extrusion-particulate leaching method for mechano-active vascular tissue engineering. The copolymer was very flexible but completely rubber-like elastic. Even the high porous PLCL scaffolds (90% salt wt) exhibited 200% elongation, but recovery over 85% in a tensile test. Moreover, the PLCL scaffolds maintained their high elasticity also in culture media under cyclic mechanical strain conditions. The highly porous scaffold (90% salt wt) withstood for an initial 1 week without any deformation and sustained for 2 weeks in culture media under cyclic stress of 10% amplitude and at 1 Hz frequency which are similar to the natural vascular conditions. Vascular smooth muscle cells (VSMCs) were seeded on to the PLCL scaffolds. The cell adhesion and proliferation on the scaffolds of various pore-size were increased with increasing pore size. For the pore sizes of 50-100 microm, 100-150 microm, 150-200 microm and 200-250 microm, the ratios of cell numbers were about 1:1.2:1.9:2.2, respectively, at both 12 h and 5 days. Similarly, the higher porous scaffolds exhibited more cell adhesion and proliferation compared to lower porous one, where the effect was more pronounced in the longer proliferation period. SMC-seeded scaffolds were implanted subcutaneously in athymic nude mice to confirm the biocompatibility. Such a high elastic property and proper biocompatibility to SMCs of PLCL scaffolds prepared in this study will be very useful to engineer SM-containing tissues such as blood vessels under mechanically dynamic environments (mechano-active tissue engineering).

No abstract

No abstract

No abstract