No abstract

No abstract

The impact response of the human head has been determined by three-dimensional finite element modeling. This model represents the essential features of a 50th percentile human head. It includes a layered shell closely representing the cranial bones with the interior contents occupied by an inviscid continuum to simulate the brain. A thin fluid layer was included to represent the cerebral-spinal fluid. To validate the model, its response was obtained by applying a sine-squared pulse of 6.8 kN in magnitude and 10 ms in duration. The load was applied to a freely supported head on the frontal bone in the midsagittal plane. The computed pressure-time histories at 5 locations within the brain material compared quite favorably with previously published experimental data from cadaver experiments and provided a reasonable level of confidence in the validation of the model. A parametric study was subsequently conducted to identify the model response when the impact site (frontal, side, occipital) and the material properties of the head were varied. Interestingly, the model predicted higher contre-coup pressure in the frontal lobe (from occipital impact) than that predicted in the occipital region from frontal impact. This finding supports clinical findings of contre-coup injury being more likely to result from occipital impact than from frontal impact.

The dynamic response of the human head to side impact was studied by 2-dimensional finite element modeling. Three models were formulated in this study. Model I is an axisymmetric model. It simulated closed shell impact of the human head, and consisted of a single-layered spherical shell filled wiht an inviscid fluid. The other two models (Model II and III) are plane strain models of a coronal section of the human head. Model II approximated a 50th percentile male head by an outer layer to simulate cranial bone and an inviscid interior core to simulate the intracranial contents. The configuration of Model III is the same as Model II but more detailed anatomical features of the head interior were added, such as, cerebral spinal fluid (CSF); falx cerebri, dura, and tentorium. Linear elastic material properties were assigned to all three models. All three models were loaded by a triangular pulse with a peak pressure of 40 kPa, effectively producing a peak force of 1954 N (440 lb). The purpose of this study was to determine the effects of the membranes and that of the mechanical properties of the skull, brain, and membrane on the dynamic response of the brain during side impact, and to compare the pressure distributions from the plane strain model with the axisymmetric model. A parametric study was conducted on Model II to characterize fully its response to impact under various conditions.(ABSTRACT TRUNCATED AT 250 WORDS)

No abstract

No abstract

No abstract

No abstract