Logarithmic number system (LNS) is an attractive alternative to realize finite-length impulse response filters because of multiplication in the linear domain being only addition in the logarithmic domain. In the literature, linear coefficients are directly replaced by the logarithmic equivalent. In this paper, an approach to directly optimize the finite word length coefficients in the LNS domain is proposed. This branch and bound algorithm is implemented based on LNS integers and several different branching strategies are proposed and evaluated. Optimal coefficients in the minimax sense are obtained and compared with the traditional finite word length representation in the linear domain as well as using rounding. Results show that the proposed method naturally provides smaller approximation error compared to rounding. Furthermore, they provide insights into finite word length properties of FIR filters coefficients in the LNS domain and show that LNS FIR filters typically provide a better approximation error compared to a standard FIR filter.

Logarithmic number systems (LNS) are used to represent real numbers in many applications using a constant base raised to a fixed-point exponent making its distribution exponential. This greatly simplifies hardware multiply, divide, and square root. LNS with base-2 is most common, but in this article, we show that for low-precision LNS the choice of base has a significant impact. We make four main contributions. First, LNS is not closed under addition and subtraction, so the result is approximate. We show that choosing a suitable base can manipulate the distribution to reduce the average error. Second, we show that low-precision LNS addition and subtraction can be implemented efficiently in logic rather than commonly used ROM lookup tables, the complexity of which can be reduced by an appropriate choice of base. A similar effect is shown where the result of arithmetic has greater precision than the input. Third, where input data from external sources is not expected to be in LNS, we can reduce the conversion error by selecting a LNS base to match the expected distribution of the input. Thus, there is no one base that gives the global optimum, and base selection is a trade-off between different factors. Fourth, we show that circuits realized in LNS require lower area and power consumption for short word lengths.

The most challenging aspect of particle filtering hardware implementation is the resampling step. This is because of high latency as it can be only partially executed in parallel with the other steps of particle filtering and has no inherent parallelism inside it. To reduce the latency, an improved resampling architecture is proposed which involves pre-fetching from the weight memory in parallel to the fetching of a value from a random function generator along with architectures for realizing the prefetch technique. This enables a particle filter using M particles with otherwise streaming operation to get new inputs more often than 2M cycles as the previously best approach gives. Results show that a pre-fetch buffer of five values achieves the best area-latency reduction trade-off while on average achieving an 85% reduction in latency for the resampling step leading to a sample time reduction of more than 40%. We also propose a generic division-free architecture for the resampling steps. It also removes the need of explicitly ordering the random values for efficient multinomial resampling implementation. In addition, on-the-fly computation of the cumulative sum of weights is proposed which helps reduce the word length of the particle weight memory. FPGA implementation results show that the memory size is reduced by up to 50%.

No abstract

Abstract-Frequency-response masking (FRM) is a set of techniques for lowering the computational complexity of narrow transition band FIR filters. These FRM use a combination of sparse periodic filters and non-sparse filters. In this work we consider the implementation of these filters in a time-multiplexed manner on FPGAs. It is shown that the proposed architectures produce lower complexity realizations compared to the vendor provided IP blocks, which do not take the sparseness into consideration. The designs are implemented on a Virtex-6 device utilizing the built-in DSP blocks.

Finite-length impulse response (FIR) filters occupy a central place many signal processing applications which either alter the shape, frequency or the sampling frequency of the signal. FIR filters are used because of their stability and possibility to have linear-phase but require a high filter order to achieve the same magnitude specifications as compared to infinite impulse response (IIR) filters. Depending on the size of the required transition bandwidth the filter order can range from tens to hundreds to even thousands. Since the implementation of the filters in digital domain requires multipliers and adders, high filter orders translate to a large number of these arithmetic units for its implementation. Research towards reducing the complexity of FIR filters has been going on for decades and the techniques used can be roughly divided into two categories; reduction in the number of multipliers and simplification of the multiplier implementation.One technique to reduce the number of multipliers is to use cascaded subfilters with lower complexity to achieve the desired specification, known as frequency-response masking (FRM). One of the sub-filters is a upsampled model filter whose band edges are an integer multiple, termed as the period L, of the target filter's band edges. Other sub-filters may include complement and masking filters which filter different parts of the spectrum to achieve the desired response. From an implementation point-of-view, time-multiplexing is beneficial because generally the allowable maximum clock frequency supported by the current state-of-the-art semiconductor technology does not correspond to the application bound sample rate. A combination of these two techniques plays a significant role towards efficient implementation of FIR filters. Part of the work presented in this dissertation is architectures for time-multiplexed FRM filters that benefit from the inherent sparsity of the periodic model filters.These time-multiplexed FRM filters not only reduce the number of multipliers but lowers the memory usage. Although the FRM technique requires a higher number delay elements, it results in fewer memories and more energy efficient memory schemes when time-multiplexed. Different memory arrangements and memory access schemes have also been discussed and compared in terms of their efficiency when using both single and dual-port memories. An efficient v vi Abstract pipelining scheme has been proposed which reduces the number of pipelining registers while achieving similar clock frequencies. The single optimal point where the number of multiplications is minimum for non-time-multiplexed FRM filters is shown to become a function of both the period, L and time-multiplexing factor, M . This means that the minimum number of multipliers does not always correspond to the minimum number of multiplications which also increases the flexibility of implementation. These filters are shown to achieve power reduction between 23% and 68% for the considered examples.To simplify the multiplier, alt...

Abstract-In this paper, we propose higher point FFT (fast Fourier transform) algorithms for a single delay feedback pipelined FFT architecture considering the 4096-point FFT. These algorithms are different from each other in terms of twiddle factor multiplication. Twiddle factor multiplication complexity comparison is presented when implemented on FieldProgrammable Gate Arrays(FPGAs) for all proposed algorithms. We also discuss the design criteria of the twiddle factor multiplication. Finally it is shown that there is a trade-off between twiddle factor memory complexity and switching activity in the introduced algorithms.

No abstract