The results indicate that collagen/CS and collagen/CS/BMP-4 lead to a higher degree of bone formation compared to other ECM components.

Aim of the present study was to test the hypothesis that the application of components of the extracellular matrix such as glycosaminoglycans used as implant surface coatings in combination with collagen, with and without growth factor, can lead to enhanced ossification and thus improve implant stability compared with collagen coatings alone. Twenty miniature pigs received 120 experimental titanium implants in the mandible. Three types of surface coatings were created: (1) collagen type I (coll), (2) collagen type I/chondroitin sulphate (coll/CS), (3) collagen type I/chondroitin sulphate/BMP-4 (coll/CS/BMP). Periimplant bone formation was assessed within a defined recess along the length axis of the implant. Bone-implant contact (BIC) and bone volume density (BVD) were determined, using both histomorphometry and synchrotron radiation micro computed tomography (SRmicroCT). To measure implant stability, resonance frequency analysis was applied after implantation and 1, 3, 7, and 22 weeks after placement. BIC was highest for coll/CS coated implants, followed by coll, p = 0.082. Histomorphometric BVD did not significantly change for any coating. SRmicroCT analysis showed an increased BVD for collagen coated implants, compared with the other two surface coatings. Implant stability showed a decrease for all coatings up to the third week. At 22 weeks, all coatings showed an increase in stability without reaching their initial level. Highest stability was reached for coll coated implants, p = 0.051. It was concluded that collagen and coll/CS implant coatings have advantageous characteristics for peri-implant bone formation, compared with the further integration of BMP-4.

No abstract

This study shows that the short implant gives sufficient bone fixation, independently of placement. The quality of implantation and bone structure are more important than the length of the orthodontic implant.

Data analysis suggests that collagen/CS has a positive influence on bone formation after 1 month of endosseous healing.

Biological implant surface coatings are an emerging technology to increase bone formation. Such an approach is of special interest in anatomical regions like the maxilla. In the present study, we hypothesized that the coating of titanium implants with components of the organic extracellular matrix increases bone formation and implant stability compared to an uncoated reference. The implants were coated using collagen-I with either two different concentrations of chondroitin sulfate (CS) or two differentially sulfated hyaluronans. Implant coatings were characterized biochemically and with atomic force microscopy. Histomorphometry was used to assess bone-implant contact (BIC) and bone-volume density (BVD) after 4 and 8 weeks of submerged healing in the maxilla of 20 minipigs. Further, implant stability was measured by resonance frequency analysis (RFA). Implants containing the lower CS concentration had significantly more BIC, compared to the uncoated reference at both times of interest. No significant increase was measured from week 4 to 8. Differences in BVD and RFA were statistically not significant. A higher concentration of CS and the application of sulfated hyaluronans showed no comparable increase in BIC. This study demonstrates a positive effect of a specific collagen-glycosaminoglycan combination on early bone formation in vivo.

No abstract

No abstract