The inkjet-printing process of precursor solutions containing In nitrate dissolved in 2-methoxyethanol is optimized using ethylene glycol as a cosolvent that allows the stabilization of the droplet formation, leading to a robust, repeatable printing process. The inkjet-printed precursor films are then converted to InO semiconductors at flexible-substrate-compatible low temperatures (150-200 °C) using combined far-ultraviolet (FUV) exposure at ∼160 nm and thermal treatment. The compositional nature of the precursor-to-metal oxide conversion is studied using grazing incidence X-ray diffraction (GIXRD), X-ray reflectivity (XRR), and Fourier transform infrared (FTIR) spectroscopy that indicate that amorphous, high density (up to 5.87 g/cm), and low impurity InO films can be obtained using the combined annealing technique. Prolonged annealing (180 min) at 150 °C yields enhancement-mode TFTs with saturation mobility of 4.3 cm/(Vs) and ∼1 cm/(Vs) on rigid Si/SiO and flexible plastic PEN substrates, respectively. This paves the way for manufacturing relatively high-performance, printed metal-oxide TFT arrays on cheap, flexible substrate for commercial applications.
Engineering of an In2O3 semiconductor and Ag source/drain interface in inkjet-printed thin-film transistors enhances the saturation mobility by two orders of magnitude.
Flexible plastic substrates are widely used in printed electronics; however, they cause major climate impacts and pose sustainability challenges. In recent years, paper-based electronics has been studied to increase the recyclability and sustainability of printed electronics. The aim of this paper is to analyze the printability and performance of metal conductor layers on different paper-based substrates using both flexography and screen printing and to compare the achieved performance with that of plastic foils. In addition, the re-pulpability potential of the used paper-based substrates is evaluated. As compared to the common polyethylene terephthalate (PET) substrate, the layer conductivity on paper-based substrates was found to be improved with both the printing methods without having a large influence on the detail rendering. This means that a certain surface roughness and porosity is needed for the improved ink transfer and optimum ink behavior on the surface of the substrate. In the case of uncoated paper-based substrates, the conductivity and print quality decreased by preventing the formation of the proper and intimate ink-substrate contact during the ink transfer. Finally, the re-pulpability trials together with layer quality analysis detected very good, coated substrate candidates for paper-based printed electronics competing with or even outperforming the print quality on the reference PET foil.
In our research on sustainable solutions for printed electronics, we are moving towards renewable materials in applications, which can be very challenging from the performance perspective, such as printed circuit boards (PCB). In this article, we examine the potential suitability of wood-based materials, such as cardboard and veneer, as substrate materials for biodegradable solutions instead of the commonly used glass-fiber reinforced epoxy. Our substrate materials were coated with fire retardant materials for improved fire resistance and screen printed with conductive silver ink. The print quality, electrical conductivity, fire performance and biodegradation were evaluated. It was concluded that if the PCB application allows manufacturing using screen printing instead of an etching process, there is the potential for these materials to act as substrates in, e.g., environmental analytics applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.