Three-dimensional nanostructure fabrication has been demonstrated by 30 keV Ga+ focused ion beam assisted deposition using a aromatic hydrocarbon precursor. The characterization of deposited film on a silicon substrate was performed by a transmission microscope and Raman spectra. This result indicates that the deposition film is a diamondlike amorphous carbon. Production of three-dimensional nanostructure is discussed. Microcoil, drill, and bellows with 0.1 μm dimension were fabricated as parts of the microsystem. Furthermore, microstructure plastic arts is advocated as a new field using microbeam technology, presenting one example of a microwine glass with 2.75 μm external diameter and 12 μm height.

The Morpho-butterfly wing reflects interfered brilliant blue, which originates from nanostructures on its scales, for any incidence angle of white light. We have, for the first time, fabricated a Morpho-butterfly-scale quasi-structure using focused-ion-beam chemical-vapor-deposition (FIB-CVD) and observed brilliant blue reflection from this quasi-structure with an optical microscope. We measured the reflection from real Morpho-butterfly scales and from the quasi-structure with a photonic multi-channel spectral analyzer system. The reflection spectra of the quasi-structure were very similar to those of Morpho-butterfly scales.

Focused-ion-beam chemical vapor deposition (FIB-CVD) is an excellent technology for forming three-dimensional nanostructures. Various diamond-like-carbon (DLC) free-space-wirings have been demonstrated by FIB-CVD using a computer-controlled pattern generator, which is a commercially available pattern generator for electron-beam (EB) lithography. The material composition and crystal structure of DLC free-space-wiring were studied by transmission-electron microscopy and energy-dispersive x-ray spectroscopy. As a result, it became clear that DLC free-space-wiring is amorphous carbon containing a Ga core in the wire. Furthermore, the electrical resistivity measurement of DLC free-space-wiring was carried out by two terminal electrodes. Au electrodes were fabricated by EB lithography and a lift-off process. The electrical resistivity was about 100 Ω cm at room temperature.

The effects of sp2‐bonded carbon impurities on the electrochemical properties of boron‐doped diamond were investigated in moderately ([B] < 1020 cm−3) and heavily ([B] > 1021 cm−3) boron doping levels. Significant influences of sp2‐bonded carbon impurities, which show glassy carbon‐like electrochemical properties after anodic oxidation, were observed in heavily boron‐doped diamond. This indicated that the significant effects of enhanced adsorption properties were possibly caused by surface relaxation of the strains induced by heavy boron doping and sp2‐bonded carbon impurities. On the other hand, their durability was still similar to diamond electrodes rather than glassy‐carbon electrodes because of the low fraction of sp2‐bonded carbon impurities. Such “active” diamond electrodes are much less suitable for wastewater treatment than ordinary diamond electrodes due to a different oxygen‐evolution mechanism. On the other hand, “active” BDD electrodes have a much higher efficiency for electrochemical ozone production than other BDD electrodes. The electrode properties of BDD can be designed by controlling the boron doping level and introducing the sp2‐bonded carbon impurities. The guidelines proposed in this study can be used effectively to design electrodes according to their individual application, such as for use as electrochemical sensors, in wastewater treatment or electrochemical ozone production.

We prove that local observables of the set of GHZ operators for particles of spin higher than 1 2 reduce to direct sums of the spin-1 2 operators σ x and σ y and, therefore, no new contradictions with local realism arise by considering them.

Diamond-like carbon (DLC) films have been extensively applied in industries owing to their excellent characteristics such as high hardness. In particular, there is a growing demand for their use as protective films for mechanical parts owing to their excellent wear resistance and low friction coefficient. DLC films have been deposited by various methods and many deviate from the DLC regions present in the ternary diagrams proposed for sp3 covalent carbon, sp2 covalent carbon, and hydrogen. Consequently, redefining the DLC region on ternary diagrams using DLC coatings for mechanical and electrical components is urgently required. Therefore, we investigate the sp3 ratio, hydrogen content, and other properties of 74 types of amorphous carbon films and present the classification of amorphous carbon films, including DLC. We measured the sp3 ratios and hydrogen content using near-edge X-ray absorption fine structure and Rutherford backscattering-elastic recoil detection analysis under unified conditions. Amorphous carbon films were widely found with nonuniform distribution. The number of carbon atoms in the sp3 covalent carbon without bonding with hydrogen and the logarithm of the hydrogen content were inversely proportional. Further, we elucidated the DLC regions on the ternary diagram, classified the amorphous carbon films, and summarized the characteristics and applications of each type of DLC.

Mechanical characteristics and applications of diamondlike-carbon cantilevers fabricated by focused-ion-beam chemical vapor depositionMechanical characteristics and its annealing effect of diamondlike-carbon nanosprings fabricated by focused-ionbeam chemical vapor depositionThe Morpho-butterfly wing reflects interfered brilliant blue, which originates from nanostructures on its scales, for any incidence angle of white light. We have fabricated a Morpho-butterfly-scale quasistructure using focused ion beam chemical vapor deposition and observed brilliant blue reflection from this quasistructure with an optical microscope. We measured the reflection from real Morpho-butterfly scales and from the quasistructure with a photonic multichannel spectral analyzer system. The reflection spectra of the quasistructure were very similar to those of Morpho-butterfly scales.

No abstract