Background Adipose tissue is not only a very important source of filler but also the body’s greatest source of regenerative cells. Objectives In this study, adipose tissue was cut to the desired dimensions using ultra-sharp blade systems to avoid excessive blunt pressure and applied to various anatomical areas—a procedure known as Adjustable Regenerative Adipose-tissue Transfer (ARAT). MEchanical Stromal-cell Transfer (MEST) of regenerative cells from fat tissue was also examined. Methods ARAT, MEST, or a combination of these were applied in the facial area of a total of 24 patients who were followed for at least 24 months. The integrity of the fat tissue cut with different diameter blades is shown histopathologically. The number and viability of the stromal cells obtained were evaluated and secretome analyses were performed. Patient and surgeon satisfaction were assessed with a visual analogue scale. Results With the ARAT technique, the desired size fat grafts were obtained between 4,000- and 200-micron diameters and applied at varying depths to different aesthetic units of the face, and a guide was developed. In MEST, stromal cells were obtained from 100 mL of condensed fat using different indication-based protocols (IPs) with 93% mean viability and cell counts of 28.66–88.88 × 106. Conclusions There are two main complications in fat grafting: visibility in thin skin and a low retention rate. The ARAT technique can be used to prevent these two complications. MEST, on the other hand, obtains a high rate of fat and viable stromal cells without applying excessive blunt pressure.

No abstract

The whole world is fighting with the COVID-19 pandemic, which traps people home, causing high business and economic losses, and above all, leads to very serious deaths. The lack of a valid, accepted treatment protocol and vaccine that leads to continued treatment searches. Leng et al published their article in the Aging and Disease journal, which demonstrates that mesenchymal stem cells (MSCs) can be used for COVID-19 treatment.Adipose tissue is one of the most important MSCs sources in the body, and adipose derived stromal cells (ADSCs) from adipose tissue are also one of the most valuable components of stromal vascular fraction (SVF). Finally, Gentile and Sterodimas, have also published their article for the potential use of SVF in COVID-19 treatment in Aging and Disease journal. Their publication has been a guide in many ways. Adipose tissuederived stromal cells have three main features: Immunomodulatory, anti-inflammatory and regenerative. Immunomodulator effects are used as a preventive in patients prone to disease; its anti-inflammatory effects may allow them to be used as a therapeutic during active disease period and finally regenerative effects to repair postdisease sequale. Those cells can be obtained not only enzymatically, but also mechanically with very benefits. They can be delivered not only systemically through the IV route but also to the target organ with a carrier. While suggesting any adipose tissue-derived treatment method possibility, the relation of adipose tissue COVID-19 should not be ignored. Because, COVID-19 shows its effect through ACE-2 and adipose tissue is very rich and important tissue in terms of ACE-2.

Introduction: Adipose-derived stromal cells (ADSCs) can be an important alternative in COVID-19 prevention, treatment, and subsequent sequelae repair. However, ACE-2 plays a common role in the pathogenesis of adipocyte hypertrophy and COVID 19. Areas covered: In this 'Perspective,' the author would like to emphasize the use of adipose tissuederived stromal cells in COVID 19 and the issues that clinicians should pay attention to in fat graft applications in terms of adipose tissue-RAS relationship. The new normal for adipose tissue in COVID 19 will be highlighted. Expert Opinion: ADSCs may potentially be used in COVID-19. However, it has been speculated that ACE2 receptors are responsible for the pathogenesis of adipose tissue overgrowth and may be a potential danger in terms of the relationship between ACE2 receptors and COVID19. We speculate that reducing the size of overgrown fat tissue by ultra-sharp blades and using near-normal adipocytes will create a 'new normal.' ARTICLE HISTORY

Background Regenerative medicine is the fastest developing branch of plastic surgery in recent times. Adipose tissue is one of the largest and most important sources in the body for stromal cells. Although mechanical isolation methods are both very popular and have many advantages, they still have no accepted protocols. Objective We developed new protocols called indication-based protocols (IPs) for standardization and new techniques called mechanical stromal-cell transfer (MEST) by using ultra-sharp blades and dilution of adipose tissue with different solutions (saline, Ringer and 5% Dextrose) Methods & material: In order to obtain the desired physical structure (liquid, gel, solid) and the desired volume, four different types of IPs have been defined. Adipose tissue was prediluted with different solutions using 10 or 20 cc injectors in IPs 1 and 2, while condensed adipose tissue was used directly in IPs 3 and 4. Results In MEST, stromal cells were obtained from 100 mL of condensed fat using different IPs with 92% mean viability and cell counts of 26.80–91.90 × 106. Stromal cells can be obtained in the desired form and number of cells by using four different IPs. Conclusion Isolation of stromal cells by cutting fat with sharp blades will prevent the death of fat tissue and stromal cells and will allow high viability and cell count with our new technique. Predilution with different solutions: Diluting the condensed adipose tissue with the desired solutions (saline, Ringer or 5% Dextrose) before the adinizing process will provide even more stromal cells. Lay Summary Obtaining regenerative stromal cells from adipose tissue can be done by two methods: Enzymatic and mechanical. Mechanical methods have many advantages. Although mechanical stromal cell extraction from adipose tissue is very popular and many techniques have been described, there are still no accepted protocols, definition for the end product, and no consensus on the status of the stromal cells. In this study, stromal cells were obtained mechanically by using ultra-sharp blade systems, without exposing adipose tissue to blunt trauma. Thus, a higher number of cells and higher viability could be obtained. An “Indication based” protocol has been defined for the first time in order to obtain the desired number and status (solid, semi-solid, liquid) end product. Diluting the condensed adipose tissue with the desired solutions (saline, Ringer or 5% Dextrose) before the adinizing process will provide even more stromal cells. This will provide an opportunity for clinicians to obtain and apply a stromal cell solution for different indications in different anatomical regions.

Clinical applications of stromal cells obtained mechanically from adipose tissue are quite popular methods. However, generally accepted protocols still do not exist. In this study, three new delivery methods using different protocols are presented as innovative methods in accordance with an approach called “Indication-based protocols.” In mechanical methods, before cutting the fat tissue with ultra-sharp blades, which we define as “Adinizing,” mixing it with different liquids such as saline or plasma provides the stromal cells in liquid form with high number and viability as a final product. At the same time, since stromal cells and extracellular matrix are preserved by mechanical methods, it was deemed appropriate to use the term total stromal cells (TOST) instead of stromal vascular fraction for this final product, unlike the product obtained with the enzyme. TOST can be combined with plasma and used for dermal filling in “solid” form. In addition to this filling effect, it will also cause a change in the tissue regeneratively. Finally, the stromal cells obtained from liquid can be applied clinically in aerosol form with the help of nebulizer. We believe that three innovative delivery methods can be used successfully in the treatment of many clinical situations in the future.

Summary: PRP and fat-derived stromal-cell applications are the 2 most commonly used methods in regenerative medicine. PRP has a wide spectrum of indications. Mechanical methods have become very popular recently in fat-derived stromal-cell applications due to the advantages they provide. Combining these 2 methods has produced more successful results. To date, this combination has been in the form of combining 2 products obtained separately just before they are administered to the patient. In this study, fat tissue and blood samples obtained from eight volunteers were mixed with PPP as a new idea not previously reported in the literature, and stromal cells were obtained mechanically with sharp blades (adinizing). Later, the obtained PRP was added to the final product and became “supercharged.” The results were tested by the dual fluoroscopy method for cell number and viability, and the results obtained were analyzed statistically. By adding the plasma to the oil before stromal cells were obtained and cutting with sharp blades by mechanical separation, twice the volume and 4.7 times more cells were obtained compared with that obtained in the saline group (P < 0.001). We believe that the reason for this is the “binding” effect of the proteins in the plasma. This approach provided a higher cell count by using PPP, which is a “waste product,” and in addition, the potential efficiency was increased by adding PRP. However, the clinical results of this innovative method should be evaluated with advanced clinical studies.

Summary Obtaining regenerative cells from adipose tissue and their clinical use has become one of the most popular subjects of plastic surgery. However, there is no accepted classification in terms of methods. In this study, classification is proposed for the first time as a new idea. Accordingly, stromal cells can be obtained from adipose tissue by two approaches: direct methods for the bonds between parenchymal and stromal cells, and indirect methods, which target parenchymal cells rather than strong bonds, and increase the stromal cell ratio relatively. These methods can also be subclassified as fat (+), fat (−), fat (±) in terms of using the remaining fat in the final product as a graft. Direct methods include adinizing and enzymatic techniques; indirect methods include emulsification and micro-fragmentation/micronization techniques. In the enzymatic method, the fat tissue in the final product is considered dirty because it contains enzymes and must be discarded. That is why it is a fat (−) method. The adinizing method using ultra-sharp blades is fat (+) because the adipose tissue after the procedure can be used. Because the fat tissue is exposed to blunt pressure in emulsification techniques, it cannot be used as a graft. Thus, these are fat (−) methods. In micronization techniques using filter systems, there may still be intact adipocytes; therefore, it should be classified as fat (±). Adinizing provides both the highest efficiency and the full use of the end product. This classification will guide clinicians in terms of choosing the right product.