High energy demand is leading to the replacement of fossil energy with renewable sources such as solar energy. Solar cells are devices used to generate solar energy. However, when exposed to sunlight with high intensity, a solar cell can suffer a decrease in performance due to overheating. This issue can be addressing by adding a cooling system. This study used a passive cooling system by adding a heat sink with fins to the body panel of the solar cell. The advantage of the passive cooling system is that it does not require additional energy. The number of fins and types of material were varied to obtain the best passive cooling system. The number of fins used was 5, 10, and 15, and the materials used were aluminum and copper. The wind speed vector and the temperature distribution were investigated through simulation. The results showed an increase in the number of fins provided better cooling capacity and increased the photovoltaic performance. The best cooling capability and performance were obtained using 15 fins with a copper base and fin heat sink materials. The decrease in temperature and the increase in efficiency were 10.2 °C and 2.74%, respectively. Therefore, the use of passive cooling system based on heat sinks with fins could provide a potential solution to increase performance and prevent overheating of photovoltaic (PV) panel systems.
<p><em>The placement of outdoor fitness equipment at tourist attractions is one of the attractions for tourists. Besides that, it can also be used as a means of health socialization for the community in public places. The elliptical trainer type air walker is a popular fitness tool because it is easy to use and has a small risk of injury. Elliptical trainer has a working principle like a walking person where movement is influenced by the force of the hand and leg movements. The design of an elliptical trainer fitness equipment that will be placed in a public place needs to be done to get a good level of security. This article discusses the design of an elliptical trainer device that is safe to place outdoors. The design process uses the Solidworks 2017a application. The elliptical trainer is divided into 4 parts, namely the main frame, drive shaft, hand handle, and leg handle. The manufacturing process is carried out based on Design Manufacture and Assembly and machinery to reduce the risk of manufacturing failure and make it easier to work on. The result of the elliptical trainer design has dimensions of 2,500 x 1,800 x 1,000 mm. The main frame has a safety factor of 3 with a displacement of 8,524e-7 mm.</em></p>
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.