Triple-junction solar cells from III-V compound semiconductors have thus far delivered the highest solar-electric conversion efficiencies. Increasing the number of junctions generally offers the potential to reach even higher efficiencies, but material quality and the choice of bandgap energies turn out to be even more importance than the number of junctions. Several four-junction solar cell architectures with optimum bandgap combination are found for lattice-mismatched III-V semiconductors as high bandgap materials predominantly possess smaller lattice constant than low bandgap materials. Direct wafer bonding offers a new opportunity to combine such mismatched materials through a permanent, electrically conductive and optically transparent interface. In this work, a GaAs-based top tandem solar cell structure was bonded to an InP-based bottom tandem cell with a difference in lattice constant of 3.7%. The result is a GaInP/GaAs//GaInAsP/GaInAs four-junction solar cell with a new record efficiency of 44.7% at 297-times concentration of the AM1.5d (ASTM G173-03) spectrum. This work demonstrates a successful pathway for reaching highest conversion efficiencies with III-V multi-junction solar cells having four and in the future even more junctions.
The highest solar cell conversion efficiencies are achieved with four-junction devices under concentrated sunlight illumination. Different cell architectures are under development, all targeting an ideal bandgap combination close to 1.9, 1.4, 1.0, and 0.7 eV. Wafer bonding is used in this work to combine materials with a significant lattice mismatch. Three cell architectures are presented using the same two top junctions of GaInP/GaAs but different infrared absorbers based on Germanium, GaSb, or GaInAs on InP. The modeled efficiency potential at 500 suns is in the range of 49-54% for all three devices, but the highest efficiency is expected for the InP-based cell. An efficiency of 46% at 508 suns was already measured by AIST in Japan for a GaInP/GaAs//GaInAsP/GaInAs solar cell and represents the highest independently confirmed efficiency today. Solar cells on Ge and GaSb are in the development phase at Fraunhofer ISE, and the first demonstration of functional devices is presented in this paper.
The effect of increasing the number of quantum wells in a strain-compensated, multiquantum-well solar cell is investigated. It is found that as the well number is increased, dark current level close to the operating point rises linearly. Short-circuit current in the AM0 spectrum also rises linearly with the inclusion of more quantum wells. This allows the cell to maintain a constant open-circuit voltage irrespective of the number of wells grown. This is anticipated to have advantages when the cell is used as a replacement for the GaAs junction in the existing generation of tandem and triple-junction cells since current levels can be matched to the upper junction without detriment to the voltage performance. This result allows us to predict a tandem cell AM0 efficiency of 23.8% based on the 50-well cell.
III-V InGaP/InGaAs/Ge triple junction solar cells have been developed which incorporate quantum wells into the InGaAs and InGaP junctions. Characterization of such devices shows an absolute efficiency gain of up to 2% with Voc exceeding that of non-QW devices. Cells grown on 6â² wafers with quantum wells in the InGaAs junction are now commercially available with median efficiencies above 41%
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.