A SiGe HBT technology featuring f T /f max /BV CEO =300GHz/ 500GHz/1.6V and a minimum CML ring oscillator gate delay of 2.0 ps is presented. The speed-improvement compared to our previous SiGe HBT generations originates from lateral device scaling, a reduced thermal budget, and changes of the emitter and base composition, of the salicide resistance as well as of the low-doped collector formation.

No abstract

No abstract

No abstract

One of the limiting factors of graphene integration into electronic, photonic, or sensing devices is the unavailability of large-scale graphene directly grown on the isolators. Therefore, it is necessary to transfer graphene from the donor growth wafers onto the isolating target wafers. In the present research, graphene was transferred from the chemical vapor deposited 200 mm Germanium/Silicon (Ge/Si) wafers onto isolating (SiO2/Si and Si3N4/Si) wafers by electrochemical delamination procedure, employing poly(methylmethacrylate) as an intermediate support layer. In order to influence the adhesion properties of graphene, the wettability properties of the target substrates were investigated in this study. To increase the adhesion of the graphene on the isolating surfaces, they were pre-treated with oxygen plasma prior the transfer process of graphene. The wetting contact angle measurements revealed the increase of the hydrophilicity after surface interaction with oxygen plasma, leading to improved adhesion of the graphene on 200 mm target wafers and possible proof-of-concept development of graphene-based devices in standard Si technologies.