Reduction of engine-out NOx emissions to ultra-low levels is facilitated by enabling low temperature combustion (LTC) strategies. However, there is a significant energy penalty in terms of combustion efficiency as evidenced by the high levels of hydrocarbon (HC), carbon monoxide (CO), and hydrogen emissions. In this work, the net fuel energy lost as a result of incomplete combustion in two different LTC regimes is studied—partially premixed compression ignition (PPCI) using in-cylinder injection of diesel fuel and reactivity controlled compression ignition (RCCI) of port injected gasoline and direct injected diesel. A detailed analysis of the incomplete combustion products was conducted. Test results indicated that carbon monoxide (CO), hydrogen, and light hydrocarbon (HC) made up for most of the combustion in-efficiency in the PPCI mode, while heavier HC and aromatics were significantly higher in the RCCI mode.
Homogeneous charge compression ignition (HCCI) has been considered as an ideal combustion mode for compression ignition (CI) engines due to its superb thermal efficiency and low emissions of nitrogen oxides (NOx) and particulate matter. However, a challenge that limits practical applications of HCCI is the lack of control over the combustion rate. Fuel stratification and partially premixed combustion (PPC) have considerably improved the control over the heat release profile with modulations of the ratio between premixed fuel and directly injected fuel, as well as injection timing for ignition initiation. It leverages the advantages of both conventional direct injection compression ignition and HCCI. In this study, neat n-butanol is employed to generate the fuel stratification and PPC in a single cylinder CI engine. A fuel such as n-butanol can provide additional benefits of even lower emissions and can potentially lead to a reduced carbon footprint and improved energy security if produced appropriately from biomass sources. Intake port fuel injection (PFI) of neat n-butanol is used for the delivery of the premixed fuel, while the direct injection (DI) of neat n-butanol is applied to generate the fuel stratification. Effects of PFI-DI fuel ratio, DI timing, and intake pressure on the combustion are studied in detail. Different conditions are identified at which clean and efficient combustion can be achieved at a baseline load of 6 bar IMEP. An extended load of 14 bar IMEP is demonstrated using stratified combustion with combustion phasing control.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.