The first-ever use of halloysite nanotube (HNT), a relatively low-cost nanomaterial abundantly available with minor toxicity for removing brilliant green dye from aqueous media, is reported. The factors affecting adsorption were studied by assessing the adsorption capacity, kinetics, and equilibrium thermodynamic properties. All the experiments were designed at a pH level of around 7. The Redlich-Peterson isotherm model fits best amongst the nine isotherm models studied. The kinetic studies data confirmed a pseudo model of the second order. Robotic investigations propose a rate-controlling advance being overwhelmed by intraparticle dispersion. The adsorbent features were interpreted using infrared spectroscopy and electron microscopy. Process optimization was carried out using Response Surface Methodology (RSM) through a dual section Fractional Factorial Experimental Design to contemplate the impact of boundaries on the course of adsorption. The examination of fluctuation (ANOVA) was utilized to consider the joined impact of the boundaries. The possibilities of the use of dye adsorbing HNT (“sludge”) for the fabrication of the composites using plastic waste are suggested.

No abstract

A set of lab-scale experiments were designed and conducted to remedy Direct Blue 15 (DB15) dye using nontoxic halloysite nanotubes (HNT) with the view to be utilized in a textile industrial effluent (TIE). The DB15 adsorbed-HNT “sludge” was used as a reinforcing agent and plastic waste to fabricate the composite. To advance the knowledge and further understand the chemical phenomena associated with DB15 adsorption on HNT, different factors like pH value, adsorbate initial concentration, adsorbent dosage, and temperature on the composite were affected experimentally tested. To estimate the adsorption capacity of HNT, nine isotherm models were applied, and it was identified that the Brouers–Sotolongo adsorption isotherm model represented the best accuracy for predicting the adsorption behavior of the HNT. Likewise, the pseudo-second-order reaction was the predominant mechanism for the overall rate of the multi-step dye adsorption process. Additionally, it was demonstrated that the mass transfer during the process is diffusion-controlled, and thermodynamic assessments showed that the process is physisorption.

The upsurge of immunocompromised patients has led to extensive study of fungal infections with Candida albicans being the frontline model of pathogenic yeast in humans. In the quest to find novel antifungal agents, this study reports the potential usage of wild-type C. albicans strain C86 to biosynthesise silver nanoparticles by microwave assisted technique. Visual colour change and UV-spectrophotometer were used for primary detection of silver nanoparticles. Additionally, the FTIR peaks confirm the particles’ formation and surface characterisation techniques such as FESEM and EDX suggests that the silver nanoparticles were sized in the range of 30–70 nm. Furthermore, pioneering work of homologous recombination technique was systematically employed to delete uncharacterized gene orf19.3120 (CNP41) in the C86 strain creating the deletion strain C403 of C. albicans. To amalgamate the two significant findings, biosynthesized silver nanoparticles were subjected to antifungal studies by disk diffusion assay on the strain C403 that lacks the gene orf19.3120 (CNP41) of C. albicans. As a synergetic approach, combinational effect was studied by incorporating antifungal drug fluconazole. Both individual and enhanced combinational antifungal effects of silver nanoparticles and fluconazole were observed on genetically modified C403 strain with 40% increase in fold area compared to wild-type C86 strain. This can be attributed to the synergetic effect of the bonding reaction between fluconazole and AgNPs. Taken together, this first-ever interdisciplinary study strongly suggests that the CNP41 gene could play a vital role in drug resistance in this fungal pathogen.

No abstract

No abstract

No abstract

No abstract