Aim:This study aims to investigate the effects of finishing and polishing procedures on four novel resin composites using three-dimensional optical profilometer.Materials and Methods:Four composites classified according to their filler size, were selected: Filtek™ Z350 XT/Nanofill (3M™ ESPE™), Esthet-X HD/Hybrid (Dentsply Caulk), Te Econom/Microfill (Ivoclar Vivadent®), Tetric EvoCeram® /Nanohybrid (Ivoclar Vivadent®). Composite specimens were made in Plexiglass mold and polished with Soflex (3M ESPE), Enhance + Pogo (Dentsply Caulk). Both the systems were used according to the manufacturers’ instructions, and the polished surfaces were assessed with an optical profilometer.Statistical Analysis Used:Kruskal-Wallis test and further pairwise comparison were performed by Mann-Whitney test.Results:The smoothest surfaces for all the resin composites tested were obtained from the Mylar strip; statistically significant differences were observed among them (P = 0.001). The order of composites was ranked from the lowest to highest surface roughness; Filtek Z350 XT < Te Econom < Tetric EvoCeram < Esthet XHD. Pairwise multiple comparison with Mann-Whitney test showed Filtek Z350 to have the smoothest surface and the least with Teric EvoCeram. Among the polishing systems, Soflex showed the smoothest surface and was significantly different from Pogo (P = 0.046).Conclusions:The effectiveness of the polishing systems seems to be dependent on the material used, treatment modality and also on the filler particle size.

Background and Objectives: The elicitation of a host’s immune–inflammatory responses to overcome oral bacterial biofilm challenges is mediated by numerous cytokines. We explored the role of three such cytokines, viz. interleukin (IL)-17, 18 and 21, by measuring their levels in the gingival crevicular fluid (GCF) of Indian individuals with healthy gingiva, chronic gingivitis, or chronic periodontitis. Materials and Method: Ninety systemically healthy individuals were enrolled in the study on the basis of predefined criteria and were categorized into three groups of 30 participants each. Groups A, B and C were composed of a control group with healthy gingiva, subjects with chronic gingivitis and subjects with chronic periodontitis, respectively. The periodontal disease status was assessed on the basis of a subject’s gingival index, probing pocket depth, clinical attachment loss and radiographic evidence of bone loss. After the complete history-taking and identification of gingival sulcus/pocket depth areas for GCF collection, a sample was collected from each subject in all groups for an estimation of the cytokine levels using ELISA. Statistical analysis was performed using SPSS v 21.0. Intergroup comparisons were conducted using a post hoc Tukey’s test. A value of p < 0.05 was considered to be statistically significant. Results: The mean IL-17, 18 and 21 concentrations in pg/mL was the greatest for Group C (99.67 ± 18.85, 144.61 ± 20.83 and 69.67 ± 12.46, respectively), followed by Group B (19.27 ± 2.78, 22.27 ± 2.43 and 22.74 ± 1.43, respectively) and finally by Group A (healthy control; 11.56 ± 0.99, 17.94 ± 1.24 and 12.83 ± 1.21 respectively). A statistically significant difference in the mean concentrations of two interleukins (IL-17 and IL-18) was observed between Groups A and C and also between Groups B and C. A statistically significant difference in the mean concentrations of IL-21 was observed between Groups B and C. Conclusions: Within the limitations of the present study, the findings revealed that the GCF levels of IL-17, IL-18 and IL-21 rose and correlated well with the severity of the disease. Thus, these cytokines present in GCF have the potential to be considered as biomarkers for periodontal tissue destruction. IL-21 in particular appears to be a promising biomarker for differentiating between gingivitis and periodontitis.

Aim and Objective: The aim of this study is to evaluate the apical transportation, centering ability, and volume of removed dentin of WaveOne Gold (WOG) and 2Shape with the use of cone-beam computed tomography. Materials and Methods: Freshly extracted mandibular teeth with sample size of thirty were carefully chosen and instrumented using the 2Shape and WOG rotary files. Preoperative and postinstrumentation cone-beam computed tomographic scans were done to accomplish mesial and distal dentin walls’ measurements and volume of removed dentin calculations, apical transportation, and centering ratio. Statistical analysis was performed and confirmed by independent t -test. Statistical significance was set at 5%. Results: When shaping ability of 2Shape and WOG was evaluated, it was reported that there was no statistically significant differences noted among the groups in relation to the total volume of removed dentin, apical transportation, and centering ratio. Conclusion: It can be concluded that 2Shape and WOG preserved the original canal anatomy well and did not eliminate excess dentin during shaping and cleaning. Rotary nickel–titanium files which work on the principle of rotary movement attained an outcome analogous to that of the rotary files working on reciprocating motion in relation to alteration in angle.

Aims:The purpose of this study was to evaluate the resistance to torsional failure and cyclic fatigue resistance of ProTaper Next (PTN), WaveOne, and Mtwo files in continuous and reciprocating motion.Settings and Design:Randomized control trial in a tertiary care setting.Subjects and Methods:A total of 10 new size 25.06 taper PTN X2, 25.06 taper Mtwo files, and 25.08 taper WaveOne primary files each was selected. A custom fabricated cyclic fatigue testing device with a 70° angle of curvature and 3 mm width; curvature starting at 6 mm from the tip was used. All instruments were rotated and reciprocated till fracture occurred and time till fracture of each instrument was recorded in seconds. For torsional failure testing 5 mm tip of each file was embedded in composite resin block and uniform torsional stresses (300 rpm, 2.0 Ncm) were applied repetitively by an endodontic motor with auto stop mode until file succumbed to torsional failure. Number of load applications leading to failure was recorded.Statistical Analysis Used:Data were analyzed using t-test for equality of means, Pearson correlation, and ANOVA test.Results:All the files showed superior resistance to cyclic fatigue in reciprocating motion when compared with continuous rotation mode. WaveOne primary files displayed maximum resistance to cyclic fatigue both in continuous and reciprocating motion. WaveOne primary files also demonstrated maximum resistance to torsional failure followed by PTN with Mtwo files exhibiting least resistance.Conclusions:Operating files in reciprocating motion enhances their cyclic fatigue resistance. WaveOne files showed maximum resistance to cyclic fatigue and torsional failure due to their cross-sectional diameter coupled M-Wire technology.

No abstract