With the nanopositioning and nanomeasuring machine (NPM-Machine) developed at the Technische Universität Ilmenau, subnanometre resolution and nanometre uncertainty in a measuring volume of 25 × 25 × 5 mm3 have been demonstrated in the last few years. This machine allows the most various measuring problems to be solved. In practice, however, there are too many different requirements for sensing surfaces or for detecting structures. So, this paper deals with the development and also the improvement of several optical and tactile probes for application in the NPM-Machine. A focus probe with a spot size of approximately 0.5 µm, a working distance of 1.5 mm and a resolution of less than 1 nm was developed and adopted in the NPM-Machine. In the next step, the working distance was improved to exploit the full vertical range of the NPM-Machine of 5 mm. To realize tactile sensing, an atomic force probe and tactile stylus probe were developed on the basis of the focus probe. These probing systems can acquire measuring data only by scanning the surface sequentially and point-by-point. To increase data acquisition, we realized a sensor based on a white-light interference microscope and parallel sampling of 1600 × 1200 data points. First results of fringe evaluation with laser interferometer reference are presented.

No abstract

No abstract

Nanopositioning and nanomeasuring machines (NPM-machines), developed at Technische Universität Ilmenau, have provided high-precision measurement and positioning of objects across ten decades, from 20 pm resolution up to 200 mm measuring range. They work on the basis of the error-minimal, extended six degrees of freedom Abbe-comparator principle, with high-precision fibre-coupled laser interferometers and optical or atomic force probes. These machines are suitable not only for measuring but also for positioning with an outstanding sub-nanometre performance. Measurements on precision step heights up to 5 mm show a repeatability of 20 pm. Consecutive step positioning of 80 pm can be demonstrated. With the new approach of an atomic clock-stabilized He–Ne-laser via a high-stable-frequency comb, we achieve a frequency stability of less than 300 Hz, respectively 0.6 ċ 10−12 relative frequency stability within 1 h at an integration time of 1 s. For the first time, we can demonstrate a direct, permanent and unbroken chain of traceability between the laser interferometric measurement within an NPM-machine and a GPS satellite-based atomic clock. This paper presents a closer insight into the scientific and metrological background as well as unrivalled measurement results, and discusses the great possibilities of this new technology.

No abstract

The today’s nanometrology limits the accuracy of the precision engineering. These limits are based on the meter definition as redefined in 1983. It is proposed to define precision mechatronics as the science and engineering of high level precision systems and machines. The paper describes a precision mechatronic machine. This device represents a long range positioning machine having a resolution of 0.1 nm over the range of 25 mm x 25 mm x 5 mm. The integration of several optical and tactile nanoprobes makes the 3D-nanopositioning suitable for various tasks. New developed nanoprobes (optical focus probe, nanoindenter, metrological scanning force microscope) and results of measurement will be presented.

No abstract

The paper describes the operation of a high-precision wide scale three-dimensional nanopositioning and nanomeasuring machine (NPM-Machine) having a resolution of 0,1 nm over the positioning and measuring range of 25 mm x 25 mm x 5 mm. The NPM-Machine has been developed by the Technische Universität Ilmenau and manufactured by the SIOS Meßtechnik GmbH Ilmenau. The machines are operating successfully in several German and foreign research institutes including the Physikalisch-Technische Bundesanstalt (PTB). The integration of several, optical and tactile probe systems and scanning force microscopes makes the NPM-Machine suitable for various tasks, such as large-area scanning probe microscopy, mask and water inspection, circuit testing as well as measuring optical and mechanical precision work pieces such as micro lens arrays, concave lenses, mm-step height standards.