Measuring surface deformation is critical in analogue modelling of Earth science phenomena. Here, we present a novel application of the Microsoft Kinect sensor to measure vertical deformation in a scaled analogue model of Nisyros volcano (Greece), simulating two magmatic sources and related surface deformation. The Kinect permits capture of real time, 640 3 480 pixel, true-colour images (RGB) and a grid of distances to the modelled surface with a horizontal and vertical resolution of AE1 mm. Using recorded distances permits quantification of vertical deformation in terms of maximum and average down-and uplift during deflation and inflation phases respectively, which is of crucial importance for defining the kinematics of faults formed during the modelling, determined from interpretation of the RGB images. Although other techniques have demonstrated similar or higher accuracy, our study demonstrates the cost-effectiveness of the Kinect in analogue modelling of volcanoes.

No abstract

Abstract. The recent availability of freely and openly available satellite remote sensing products has enabled the implementation of global surface water monitoring at a level not previously possible. Here we present a global set of satellite-derived time series of surface water storage variations for lakes and reservoirs for a period that covers the satellite altimetry era. Our goals are to promote the use of satellite-derived products for the study of large inland water bodies and to set the stage for the expected availability of products from the Surface Water and Ocean Topography (SWOT) mission, which will vastly expand the spatial coverage of such products, expected from 2021 on. Our general strategy is to estimate global surface water storage changes (ΔV) in large lakes and reservoirs using a combination of paired water surface elevation (WSE) and water surface area (WSA) extent products. Specifically, we use data produced by multiple satellite altimetry missions (TOPEX/Poseidon, Jason-1, Jason-2, Jason-3, and Envisat) from 1992 on, with surface extent estimated from Terra/Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) from 2000 on. We leverage relationships between elevation and surface area (i.e., hypsometry) to produce estimates of ΔV even during periods when either of the variables was not available. This approach is successful provided that there are strong relationships between the two variables during an overlapping period. Our target is to produce time series of ΔV as well as of WSE and WSA for a set of 347 lakes and reservoirs globally for the 1992–2018 period. The data sets presented and their respective algorithm theoretical basis documents are publicly available and distributed via the Physical Oceanography Distributed Active Archive Center (PO DAAC; https://podaac.jpl.nasa.gov/, last access: 13 May 2020) of NASA's Jet Propulsion Laboratory. Specifically, the WSE data set is available at https://doi.org/10.5067/UCLRS-GREV2 (Birkett et al., 2019), the WSA data set is available at https://doi.org/10.5067/UCLRS-AREV2 (Khandelwal and Kumar, 2019), and the ΔV data set is available at https://doi.org/10.5067/UCLRS-STOV2 (Tortini et al., 2019). The records we describe represent the most complete global surface water time series available from the launch of TOPEX/Poseidon in 1992 (beginning of the satellite altimetry era) to the near present. The production of long-term, consistent, and calibrated records of surface water cycle variables such as in the data set presented here is of fundamental importance to baseline future SWOT products.

Airborne hyper-spectral imaging has been proven to be an efficient means to provide new insights for the retrieval of biophysical variables. However, quantitative estimates of unbiased information derived from airborne hyperspectral measurements primarily require a correction of the anisotropic scattering properties of the land surface depicted by the bidirectional reflectance distribution function (BRDF). Hitherto, angular BRDF correction methods rarely combined viewing-illumination geometry and topographic information to achieve a comprehensive understanding and quantification of the BRDF effects. This is in particular the case for forested areas, frequently underlaid by rugged topography. This paper describes a method to correct the BRDF effects of airborne hyperspectral imagery over forested areas overlying rugged topography, referred in the reminder of the paper as rugged topography-BRDF (RT-BRDF) correction. The local viewing and illumination geometry are calculated for each pixel based on the characteristics of the airborne scanner and the local topography, and these two variables are used to adapt the Ross-Thick-Maignan and Li-Transit-Reciprocal kernels in the case of rugged topography. The new BRDF model is fitted to the anisotropy of multi-line airborne hyperspectral data. The number of pixels is set at 35,000 in this study, based on a stratified random sampling method to ensure a comprehensive coverage of the viewing and illumination angles and to minimize the fitting error of the BRDF model for all bands. Based on multi-line airborne hyperspectral data acquired with the Chinese Academy of Forestry’s LiDAR, CCD, and Hyperspectral system (CAF-LiCHy) in the Pu’er region (China), the results applying the RT-BRDF correction are compared with results from current empirical (C, and sun-canopy-sensor (SCS) adds C (SCS+C)) and semi-physical (SCS) topographic correction methods. Both quantitative assessment and visual inspection indicate that RT-BRDF, C, and SCS+C correction methods all reduce the topographic effects. However, the RT-BRDF method appears more efficient in reducing the variability in reflectance of overlapping areas in multiple flight-lines, with the advantage of reducing the BRDF effects caused by the combination of wide field of view (FOV) airborne scanner, rugged topography, and varying solar illumination angle over long flight time. Specifically, the average decrease in coefficient of variation (CV) is 3% and 3.5% for coniferous forest and broadleaved forest, respectively. This improvement is particularly marked in the near infrared (NIR) region (i.e., >750 nm). This finding opens new possible applications of airborne hyperspectral surveys over large areas.

Accidental release of crude oil into the sea due to human activity causes water pollution and heavy damages to natural ecosystems killing birds, fish, mammals and other organisms. A number of monitoring systems are used for tracking the spills and their effects on the marine environment, as well as for collecting data for feeding models. Among them, Earth observation technologies play a crucial role and moderate spatial resolution satellite systems are able to collect images with a very short revisit time or even daily. This paper describes the use of MODIS (Moderate Resolution Imaging Spectroradiometer) data for monitoring large oil slicks with the Fluorescence/Emissivity Index (FEI) and Object Based Image Analysis (OBIA). Two case studies are presented: the Deepwater Horizon (2010) and the Campos Basin (2011) oil spill accidents. Results show that is possible to track the dynamics of the slick both for massive and long-lasting accidents and for smaller and very quick accidents. The main advantages of the method proposed are a straightforward implementation, a fast and semi-automated data processing and the capability of integration of daytime and nighttime acquisitions, as well as its adaptability to different sensors

No abstract

Knowledge of volcanic systems and the hazards they produce is rapidly advancing as internet resources become more readily accessible, new and more sensitive field techniques are developed, and ever greater amounts of data are collected. Such rapid advances drive the need for an online collaborative knowledge management system that enables the sharing of volcanological information, and modeling and analysis tools. Vhub (http://vhub.org) is a community cyberinfrastructure platform designed for collaboration in volcanology research, education, outreach, and discovery that complements existing volcano databases and other cyberinfrastructure projects. Vhub is unique in its functionality as a nucleus for the creation of collaborative groups focused on issues such as code development, field research, education, and hazard mitigation. In addition, Vhub serves as a clearinghouse and virtual platform for computational tools relating to volcanic processes and data analysis, as well as documentation to aid in the use and understanding of these tools. By providing a means for scientists to easily disseminate data, models, and ideas, Vhub aims to promote collaboration amongst scientists and to provide resources for science education while advancing the state of understanding of volcanoes and the hazards they produce. This paper introduces the Vhub cyberinfrastructure and provides an overview of select hub features and resources.

Abstract. The recent availability of freely and openly available satellite remote sensing products has enabled the implementation of global surface water monitoring to a level not previously possible. Here we present a global set of satellite-derived time series of surface water storage variations for lakes and reservoirs for a period that covers the satellite altimetry era. Our goal is to promote the use of satellite-derived products for the study of large inland water bodies, and to set the stage for the expected availability of products from the Surface Water and Ocean Topography (SWOT) mission, which will vastly expand the spatial coverage of such products, expected from 2021 on. Our general strategy is to estimate global surface water storage changes (ΔV) in large lakes and reservoirs using a combination of paired water surface elevation (WSE) and water surface area (WSA) extent products. Specifically, we use data produced by multiple satellite altimetry missions (TOPEX-Poseidon, Jason-1, Jason-2, Jason-3, and ENVISAT) from 1992 on, with surface extent estimated from Terra/Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) from 2000 on. We leverage from relationships between elevation and surface area (i.e., hypsometry) to produce estimates of ΔV even during periods when either of the variables was not available. This approach is successful provided that there are strong relationships between the two variables during an overlapping period. Our target is to produce time series of ΔV as well as WSE and WSA for a set of 347 lakes and reservoirs globally for the 1992–2018 period. The data sets presented are publicly available and distributed via NASA’s Jet Propulsion Laboratory’s Physical Oceanography Distributed Active Archive Center (PO DAAC; https://podaac.jpl.nasa.gov/). Specifically, the WSE data set is available at https://doi.org/10.5067/UCLRS-GREV2 (Birkett et al., 2019), the WSA data set is available at https://doi.org/10.5067/UCLRS-AREV2 (Khandelwal and Kumar, 2019), and the ΔV data set is available at https://doi.org/10.5067/UCLRS-STOV2 (Tortini et al., 2019). The records we describe represent the most complete global surface water time series available from the launch of TOPEX-Poseidon in 1992 (beginning of the satellite altimetry era) to near-present. The production of long-term, consistent, and calibrated records of surface water cycle variables such as the data set presented here is of fundamental importance to baseline future SWOT products.