No abstract

This article presents a biased implementation style weak-indication self-timed full adder design that is latency optimized. The proposed full adder is constructed using the delay-insensitive dual-rail code and adheres to the 4-phase handshaking. Performance comparisons of the proposed full adder vis-à-vis other strong and weakindication full adders are done on the basis of a 32-bit self-timed ripple carry adder architecture, with the full adders and ripple carry adders realized using a 32/28nm CMOS process. The results show that the proposed full adder leads to reduction in latency by 63.3% against the best of the strong-indication full adders whilst reporting decrease in area by 10.6% and featuring comparable power dissipation. On the other hand, when compared with the existing optimized weak-indication full adder, the proposed full adder is found to minimize the latency by 25.1% whilst causing an increase in area by just 1.6%, however, with no associated power penalty.

This paper presents a new hardware optimized and error reduced approximate adder (HOERAA), which is suitable for field programmable gate array (FPGA)-and application specific integrated circuit (ASIC)-based implementations. In this work, we consider a FPGA-based implementation using Xilinx Vivado 2018.3, targeting an Artix-7 FPGA. The ASIC-based realizations are based on a 32/28nm complementary metal oxide semiconductor (CMOS) process. Based on FPGA implementations, we note the following: (i) For 32-bit addition involving a 8-bit least significant inaccurate sub-adder, HOERAA requires 22% fewer look-up tables (LUTs) and 18.6% fewer registers while reducing the minimum clock period by 7.1% and reducing the power-delay product (PDP) by 14.7%, compared to the native accurate FPGA adder, and (ii) for 64-bit addition involving a 8-bit least significant inaccurate sub-adder, HOERAA requires 11% fewer LUTs and 9.3% fewer registers while reducing the minimum clock period by 8.3% and reducing the PDP by 9.3%, compared to the native accurate FPGA adder. Based on ASIC-style implementations, HOERAA is found to achieve the following reductions in design metrics compared to an optimum accurate carry-lookahead adder: (i) A 15.7% reduction in critical path delay, a 21.4% reduction in area, and a 35% reduction in PDP for 32-bit addition involving a 8-bit least significant inaccurate sub-adder, and (ii) a 15.3% reduction in critical path delay, a 10.7% reduction in area, and a 20% reduction in PDP for 64-bit addition involving a 8-bit least significant inaccurate sub-adder. Moreover, comparisons with other approximate adders show that HOERAA has a significantly reduced average error, mean average error, and root mean square error, while reporting near optimum design metrics.2 of 15 predominant on approximate logic circuits [12] and approximate arithmetic circuits such as adders and multipliers [13]. Here, the focus is on the design of an approximate adder.Many approximate adders in the existing literature are suited for an application specific integrated circuit (ASIC)-style implementation and only some are suitable for both ASIC-and field programmable gate array (FPGA)-based implementations. Hence, it is unlikely that many approximate adders in the literature, when implemented on an FPGA, would surpass a native accurate FPGA adder of similar size because an FPGA embeds accurate arithmetic units, such as adders and multipliers, which are highly optimized for speed and area.This paper proposes a new approximate adder that is suitable for FPGA-and ASIC-based implementations, and our focus is on a comparison with other approximate adders, which are also suited for FPGA-and ASIC-based implementations. The remainder of this paper is organized as follows. A survey of some popular existing literature on approximate adders is presented in Section 2. Following this, we present the proposed approximate adder (HOERAA) in Section 3. FPGA-based implementation results corresponding to accurate and approximate adders for 32-bit and 64-bit additi...

No abstract

Adder is an important datapath unit of a general-purpose microprocessor or a digital signal processor. In the nanoelectronics era, the design of an adder that is modular and which can withstand variations in process, voltage and temperature are of interest. In this context, this article presents a new robust early output asynchronous block carry lookahead adder (BCLA) with redundant carry logic (BCLARC) that has a reduced power-cycle time product (PCTP) and is a low power design. The proposed asynchronous BCLARC is implemented using the delay-insensitive dual-rail code and adheres to the 4-phase return-to-zero (RTZ) and the 4-phase return-to-one (RTO) handshaking. Many existing asynchronous ripple-carry adders (RCAs), carry lookahead adders (CLAs) and carry select adders (CSLAs) were implemented alongside to perform a comparison based on a 32/28 nm complementary metal-oxide-semiconductor (CMOS) technology. The 32-bit addition was considered for an example. For implementation using the delay-insensitive dual-rail code and subject to the 4-phase RTZ handshaking (4-phase RTO handshaking), the proposed BCLARC which is robust and of early output type achieves: (i) 8% (5.7%) reduction in PCTP compared to the optimum RCA, (ii) 14.9% (15.5%) reduction in PCTP compared to the optimum BCLARC, and (iii) 26% (25.5%) reduction in PCTP compared to the optimum CSLA.

Abstract-Addition forms the basis of digital computer systems. A gate level self-timed full adder design, utilizing a pre-defined set of gates, available in a commercial synchronous standard cell library is discussed in this paper. The proposed adder satisfies Seitz's weak-indication specifications and exhibits reduced data path delay in comparison with other existing adders, which satisfy the property of indication. In terms of power and area, it is competitive to the best of other self-timed adders.

This article presents two area/latency optimized gate level asynchronous full adder designs which correspond to early output logic. The proposed full adders are constructed using the delay-insensitive dual-rail code and adhere to the four-phase return-to-zero handshaking. For an asynchronous ripple carry adder (RCA) constructed using the proposed early output full adders, the relative-timing assumption becomes necessary and the inherent advantages of the relative-timed RCA are: (1) computation with valid inputs, i.e., forward latency is data-dependent, and (2) computation with spacer inputs involves a bare minimum constant reverse latency of just one full adder delay, thus resulting in the optimal cycle time. With respect to different 32-bit RCA implementations, and in comparison with the optimized strong-indication, weak-indication, and early output full adder designs, one of the proposed early output full adders achieves respective reductions in latency by 67.8, 12.3 and 6.1 %, while the other proposed early output full adder achieves corresponding reductions in area by 32.6, 24.6 and 6.9 %, with practically no power penalty. Further, the proposed early output full adders based asynchronous RCAs enable minimum reductions in cycle time by 83.4, 15, and 8.8 % when considering carry-propagation over the entire RCA width of 32-bits, and maximum reductions in cycle time by 97.5, 27.4, and 22.4 % for the consideration of a typical carry chain length of 4 full adder stages, when compared to the least of the cycle time estimates of various strong-indication, weak-indication, and early output asynchronous RCAs of similar size. All the asynchronous full adders and RCAs were realized using standard cells in a semi-custom design fashion based on a 32/28 nm CMOS process technology.

No abstract