No abstract

There is growing interest in using corrosion inhibitors and protective treatments to limit the degradation of mild steel, leading to the development of numerous Schiff bases as cutting-edge inhibitors. In this study, the effectiveness of a Schiff base, 3-((5-mercapto-1,3,4-thiadiazol-2-yl)imino)indolin-2-one (MTIO), to prevent mild steel corrosion in HCl was investigated using weight loss measurements, potentiodynamic polarization measurements, electrochemical impedance spectroscopy techniques, and surface characterization. The experimental results showed that 0.5 mM MTIO exhibited a satisfactory inhibitor efficiency of 96.9% at 303 K. The MTIO molecules physically and chemically adsorbed onto the mild steel surface following the Langmuir model, forming a compact protective film attributed to the presence of a thiazole ring in the MTIO structure. Theoretical calculations were combined with experimental techniques to investigate the anticorrosion performance and mechanism of inhibition.

In this investigation, an oxadiazole namely 5-(4-(1H-pyrrol-1-yl)phenyl)-2-mercapto-1,3,4-oxadiazole (PMO), was synthesized and explored as an inhibitor against the corrosion  of mild steel in 1.0 M hydrochloric acid environment at various solution temperature 303-333 K. gravimetric, and microscopic techniques, namely, weight loss (WL), and scanning electron microscopy (SEM), have been used to evaluate the inhibitive performance of the tested PMO. The results of the WL method displayed that the inhibition efficiency (%IE) was found to increase with the inhibitor concentration, while it reduced with increasing temperature. Furthermore, the WL results reveal that PMO inhibits corrosion display an IE of 95% at the highest concentration of 0.005 M. The SEM images of the mild steel surface coupon after adding PMO revealed a wide coverage of PMO molecules on the mild steel surface. Hence, the high inhibiting efficiency acquired by the tested inhibitor was explained by the strong adsorption of PMO molecules on the surface of mild steel. A protective layer has been constructed and it separating the mild steel surface from the hydrochloric acid solution, and such adsorption was found to obey Langmuir adsorption isotherm. Moreover, the thermodynamic parameters suggested that the adsorption nature of PMO molecules on the coupon surface was chemo-physisorption. Quantum chemical calculations were conducted by density functional theory (DFT) which help correlate the methodological findings with the theoretical investigations. The mechanisms of PMO molecules as corrosion inhibitor for mild steel surface in the corrosive environment was also discussed.

A corrosion inhibitor namely N′-(4-hydroxy-3-methoxybenzylidene) nicotinohydrazide was synthesized and the inhibition efficiency of the investigated inhibitor toward the mild steel corrosion in 1 M HCl was studied. The anticorrosion effect has been investigated by weight loss (WL) techniques and electrochemical analysis includes potentiodynamic polarization (PDP) studies and electrochemical impedance spectroscopy (EIS). The current investigation has demonstrated that the tested inhibitor is suitable in corrosive environment and the inhibitive efficacy up to 97% in 1 M HCl. PDP measurements showed that the nicotinohydrazide is a mixed type inhibitor. EIS measurements showed that an increase in the inhibitory concentration leads to an increase in the charge transfer resistance (Rct) and a decrease in the double-layer capacitance (Cdl). Experimental results for the inhibitory performance of WL methods and electrochemical techniques (PDP and EIS) are in good agreement. The tested inhibitor molecules adsorbed on the surface of mild steel in a hydrochloric acid solution followed Langmuir’s isothermal adsorption. Quantum chemical parameters based on density function theory (DFT) techniques were conducted on oxygen/nitrogen-bearing heterocyclic molecule employed as a corrosion inhibitor for mild steel in HCl to evaluate the correlation between the inhibitor structure and inhibitory performance. The parameters including the energy gap (ΔE), dipole moment (μ), electronegativity (χ), electron affinity (A), global hardness (η), softness (σ), ionization potential (I), the fraction of electrons transferred (ΔN), the highest occupied molecular orbital energy (EHOMO), and the lowest unoccupied molecular orbital energy (ELUMO) were also calculated and were in good agreement with the experimental results.

No abstract

A recent study has shown that Schiff base OHMHI is an effective inhibitor of the corrosion of mild steel in acidic media. The study utilized weight loss measurements and electrochemical techniques, such as EIS and potentiodynamic polarization, to analyze the corrosion inhibition efficiency of OHMHI. The results of the study show that the presence of OHMHI in the corrosive environment significantly reduced the corrosion rate of mild steel and increased its corrosion resistance. The impedance spectra analysis indicated that OHMHI was adsorbed on the surface of mild steel, providing a protective layer. The potentiodynamic polarization study confirmed the protective role of OHMHI by showing an increase in the passive current density of the mild steel in the presence of OHMHI. The inhibitory efficiency of OHMHI was found to be 96.1%, indicating that it is an effective corrosion inhibitor for mild steel. The study also investigated the optimal conditions for the use of OHMHI as a corrosion inhibitor, with a concentration of 0.5 mM and a temperature of 303 K being chosen. The Langmuir adsorption isotherm concept was used to demonstrate the physical and chemical adsorption of OHMHI on the surface of mild steel. Morphological investigations of the uninhibited and inhibited surfaces of the mild steel specimen were examined using scanning electron microscopy (SEM) analysis. Furthermore, computational investigations using density functional theory (DFT) and experimental data were merged to explore the corrosion inhibition efficiency and mechanism of inhibition. Although the results are promising, further studies are needed to determine the long-term effects of OHMHI on mild steel corrosion and to evaluate its effectiveness under different environmental conditions. Overall, the study highlights the potential of OHMHI as an effective corrosion inhibitor for mild steel in acidic media.

No abstract

In this research a number of pyrrolidine-2-one derivatives were prepared by lactamization of γ –butyrolactone (GBL) with hydrazine hydrate (80%) to produce (1-aminopyrrolidine-2-one) that undergoes several reactions to afford these derivatives that diagnosed by infrared, nuclear magnetic resonance and mass spectroscopy. Antibacterial activity has also been studied using some types of bacteria, some were found to have good antibacterial activity.