Slag from nickel smelting operations in the Sudbury basin in Ontario, Canada, has become ubiquitous. This material rich in heavy metals such as iron, upon ingestion has the potential to effect physical, radiological, chemical, mechanical, and structural changes in biological systems. In this work, we analyzed the effects of slag ingestion through diet, on several quantitative and qualitative parameters of the tibio-tarsal bones in pigeons (Columbia Livia Domestica). The specimens were maintained on a seed diet and divided into a control group (n = 9) provided (normal) clean limestone grit, and an experimental group (n = 9) provided slag-based grit, both for a period of one year. Their tibio-tarsal bones were harvested for analysis. Quantitative analytical methods included conventional density measurements, caliper-based cortical thickness measurements, bone mineral density measurements using Dual Energy X-ray Absorptiometry (DEXA), calcium and iron concentration measurements using mass spectrometry, and the determination of Young's Moduli and ultimate breaking strength (both in compression) using a universal testing machine (UTM). Qualitative microscopy studies, both optical and electron -including energy dispersive spectroscopy (EDS) -were carried out for both sample groups. A Welch's t-test (single tail) was used to compare means of the seven quantitative parameters between control and experimental samples; in six of these parameters, a statistically significant difference was found (p ≤ 0.05). Microscopy, both optical and electron -coupled with EDS analysis -revealed structural differences in bone between the two groups. Engineering hardness testing of grit types in the dietary components revealed that the slag ingested by the experimental group was approximately twice as hard (Brinell and Rockwell hardness) as the limestone grit in the control group diet. We conclude that slag ingestion through diet in the species examined, is associated with measurable changes in mechanical, chemical, structural, and radiological properties of the tibio-tarsal bones.
The Sudbury Basin in Ontario, Canada, has been heavily mined for over 150 years due to the presence of sulphide ores rich in nickel and copper. Slag is a by-product...
A study was undertaken to determine the influence of extraction process on recovery and quality of fat from chicken skin. In order to do so, 20-kg batches of skin were ground (9.5 mm plate) or homogenized in a colloidal mill (0.2-mm knife set), then heated to 50 or 80 C to rupture fat cells. The fat was recovered by centrifugation and was evaluated for composition, appearance, and stability. A maximum amount of fat (89.6% of the fat initially contained in skin) was recovered from homogenized skin heated to 80 C, whereas heating ground skin to 50 C yielded the lowest fat recovery (51.5% of skin fat content). In general, fat composition and appearance were little affected by extraction conditions, with the exception that the fat extracted from homogenized skin contained more (P < or = 0.001) unsaponifiable cell membrane constituents (0.17 to 0.20%), including antioxidant tocopherol fractions (10.3 microg/ml), than the fat extracted from ground skin (0.08% and 7.5 to 8.3 microg/ml, respectively). This difference likely contributed to the greater oxidative stability of the fat extracted from homogenized skin, which was observed in Schaal oven tests.
A capillary gas chromatographic (GC) method using an electron capture detector is described for determining T-2 and HT-2 toxins and diacetoxyscirpenol (DAS) in cereal grains at levels as low as 100 ppb for T-2 and DAS and 50 ppb for HT-2. Samples are extracted with methanol-water according to the Scott method, and further purified on a silica gel cartridge and a cyano column. Heptafluorobutyrylimidazole (HFBI) is added to form the esters of the analytes. Ester(s) of T-2, HT-2 and DAS are separated on a 30 m × 0.32 mm DB-5 fused silica column and measured with a "Ni electron capture detector. Samples were confimed by gas chromatography/mass spectrometry using electron impact ionization and single ion monitoring at the molecular mass of 501.11 m/z for T-2, 665.08 m/z for HT-2, and 502.12 m/z for DAS at 10 000 resolving power. The method was applied to wheat, oats, and barley. Average recoveries ranged from a low of 65% for T- 2 in barley to a high of 99% for DAS in oats.
A procedure is described for the separation and quantification of Vitamin D3 from different feeds and premixes. The study was conducted, first using a liquid partition step as a preliminary clean-up after extraction, then chromatography on activated Silica gel 60 before final analysis on a high pressure liquid chromatograph (HPLC) using a LiChrosorb NH2 (10 mu) column and a variable wavelength UV detector set at 264 nm. Total analysis on the HPLC was achieved in fifteen minutes. The detector response curve for an authentic D3 standard was linear using peak areas with a minimum detectable amount being 5 ng. The overall percent recovery of D3 in feeds was 94.4 +/- 2.4%. The minimum detectable amount of D3 in animal feeds was found to be in the region of 2,000 I.U./kg.
A high-speed liquid chromatographic (LC) method using post-column derivatization is described for the determination of monensin, narasin, and salinomycin in a variety of animal feeds. The ionophores are extracted with hexane-ethyl acetate (90 + 10). A portion of the sample is evaporated, diluted to a known volume, and analyzed using a 6 cm 3 μm C18 column and an absorbance detector after post-column reaction with vanillin. The method has been applied to poultry and swine feeds with levels of 3-100 ppm added antibiotic. A comparison was also carried out with medicated poultry feed and beef feed lot supplement samples previously analyzed by 2 separate bioassay methods for monensin and salinomycin, respectively. Recoveries for the LC method ranged from 92.1 to 103% with an average recovery of 98.1% and a coefficient of variation of 3.65%.
A high pressure liquid chromatographic (HPLC) method is described to determine zearalenone in animal feeds at levels as low as 0.01 ppm. Samples are extracted with chloroform-ethanol and initially purified using a SEP-PAK silica cartridge, followed by column chromatography using Sephadex LH-20. Separation by normal phase HPLC is followed by fluorescence detection. Recoveries at levels of 1.0–0.01 ppm averaged greater than 90%. Confirmation included HPLC analysis of the sample and a zearalenone standard, using 3 different excitation wavelengths, and comparison of fluorescence responses obtained. The method was successfully applied to the analysis of 1 corn and 3 cornmeal samples. Zearalenone was detected in all 4 samples at levels of 0.379–19.2 ppm.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.