No abstract

Glassy carbon electrodes modified with single-walled carbon nanotubes and a three-dimensional network of electropolymerized Au nanoparticles capped with 2-mercaptoethanesulfonic acid, p-aminothiophenol, and 1-adamantanethiol were used as hybrid electrochemical platforms for supramolecular immobilization of a synthesized artificial neoglycoenzyme of xanthine oxidase and β-cyclodextrin through host-guest interactions. The ensemble was further employed for the bioelectrochemical determination of xanthine. The biosensor showed fast amperometric response within 5 s and a linear behavior in the 50 nM to 9.5 μM xanthine concentration range with high sensitivity, 2.47 A/(M cm(2)), and very low detection limit of 40 nM. The stability of the biosensor was significantly improved and the interferences caused by ascorbic and uric acids were noticeably minimized by coating the electrode surface with a Nafion thin film.

The design of a novel biosensing electrode surface, combining the advantages of magnetic ferrite nanoparticles (MNPs) functionalized with glutaraldehyde (GA) and poly(diallyldimethylammonium chloride) (PDDA)-coated multiwalled carbon nanotubes (MWCNTs) as platforms for the construction of high-performance multienzyme biosensors, is reported in this work. Before the immobilization of enzymes, GA-MNP/PDDA/MWCNT composites were prepared by wrapping of carboxylated MWCNTs with positively charged PDDA and interaction with GA-functionalized MNPs. The nanoconjugates were characterized by scanning electron microscopy (SEM) and electrochemistry. The electrode platform was used to construct a bienzyme biosensor for the determination of cholesterol, which implied coimmobilization of cholesterol oxidase (ChOx) and peroxidase (HRP) and the use of hydroquinone as redox mediator. Optimization of all variables involved in the preparation and analytical performance of the bienzyme electrode was accomplished. At an applied potential of -0.05 V, a linear calibration graph for cholesterol was obtained in the 0.01-0.95 mM concentration range. The detection limit (0.85 μM), the apparent Michaelis-Menten constant (1.57 mM), the stability of the biosensor, and the calculated activation energy can be advantageously compared with the analytical characteristics of other CNT-based cholesterol biosensors reported in the literature. Analysis of human serum spiked with cholesterol at different concentration levels yielded recoveries between 100% and 103%

No abstract

No abstract

No abstract

No abstract

No abstract