High performance nanocomposites comprising a polyurethane elastomer (PUE) and an organically modified layered silicate are prepared. These nanocomposites are based on poly(propylene glycol), 4,4Ј-methylene bis(cyclohexyl isocyanate), 1,4-butandiol, and organoclay. The tensile strength and strain at break for these novel PUE nanocomposites increases more than 150%, but the hardness remains unchanged. The fatigue properties are significantly improved. With 3 wt % organoclay, the fatigue properties are improved the most, which is important for the PU industry. The effects of the isocyanate index on the mechanical properties of the PUE nanocomposites are investigated. It is found that an isoyanate index of 1.10 results in the best improvement in stress and elongation at break.

No abstract

No abstract

No abstract

No abstract

Heat ageing and thermal stability of a silicone rubber (SR) filled with montmorillonite clay (MMT) was investigated. Three types of rubber nanocomposites were prepared with highly exfoliated Cloisite 30B (SR/C30B), intercalated/exfoliated Cloisite Na+ (SR/Na+MMT), and highly intercalated Cloisite 20A (SR/C20A). This study showed that the SR/C30B nanocomposite exhibited excellent heat resistance in comparison to the other two nanocomposites and neat SR as revealed by higher retention strength. The thermal stability of the rubber in air was strongly dependent on the clay morphology and increased in the following order: highly intercalated/exfoliated SR/Na+MMT < highly intercalated SR/C20A < highly exfoliated SR/C30B. The thermogravimetric analyses of the SR/C30B nanocomposite showed a substantial increase in the final residue in comparison with the neat SR. This indicated a major improvement in the thermal stability of the rubber containing the exfoliated clay, which was also supported by the higher activation energy of decomposition measured for the nanocomposite. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 41061.

No abstract

No abstract