N-(3-Aminopropyl)pyrrole was covalently coupled with alginate in an aqueous-phase reaction by means of carbodiimide-mediated activation chemistry to provide a pyrrole-alginate conjugate for subsequent use in biosensor applications. The pyrrole-alginate conjugate was quantified by UV spectroscopy at 230 nm, by an HPSEC-MALLS analytical method, as well as by FTIR and 13C NMR spectroscopies. The new pyrrole-alginate conjugate was used for the immobilization of polyphenol oxidase (PPO) onto an electrode surface by physical entrapment resulting from the gellification process and electrochemical polymerization of the pyrrole groups. The efficiency of this cross-linking approach (chemical and electrochemical) was investigated by comparing the amount of enzyme released from polypyrrole-alginate and regular alginate. In addition, biosensors were prepared by entrapment of the PPO in polypyrrole-alginate and regular alginate matrixes and their performance for the amperometric determination of catechol chosen as a model analyte was examined, yielding a sensitivity of 350 and 80 microA M(-1) cm(-2), respectively, for polypyrrole-alginate and alginate biosensors.

The successful development and analytical performances of two biosensor configurations based on the entrapment of algal cells of Chlorella vulgaris into either a regular alginate gel or a newly synthesized pyrrole-alginate matrix are reported. These biosensors were compared in terms of their amperometric current measurements to p-nitrophenyl phosphate when used as substrate for the detection of an algal alkaline phosphatase activity. The high stability of the pyrrole-alginate gel when compared to that of the alginate coating is herein demonstrated.

No abstract

No abstract

No abstract

A conductive surface was created for the development of a biosensing platform via chemical polymerization of pyrrole onto the surface of poly(methyl methacrylate) (PMMA) fibers, with a subsequent electrogeneration of a photoactive linker pyrrole-benzophenone (PyBz) monomer on the fiber surface. Irradiation of the benzophenone groups embedded in the polypyrrole (Ppy) films by UV (350 nm) formed active radicals, allowing covalent attachment of the desired biomaterials. Characterization and optimization of this platform were carried out, with the platform showing conductive, stable, thin, controllable, and light-transmissible film features. Various parameters such as time deposition, process temperature, and activator plus pyrrole monomer concentrations were examined in the study. The morphology and permeability of the optic-fiber PMMA fibers were investigated to examine mass transfer ability. Cyclic voltammetry and amperometry techniques were applied to characterize the electrical features of the surface and charge transfer. The platform potential was then demonstrated by the construction of both amperometric and optical biosensors.

No abstract

No abstract