Piezotronics with capacity of constructing adaptive and seamless interactions between electronics/machines and human/ambient are of value in Internet of Things, artificial intelligence and biomedical engineering. Here, we report a kind of highly sensitive strain sensor based on piezotronic tunneling junction (Ag/HfO2/n-ZnO), which utilizes the strain-induced piezoelectric potential to control the tunneling barrier height and width in parallel, and hence to synergistically modulate the electrical transport process. The piezotronic tunneling strain sensor has a high on/off ratio of 478.4 and high gauge factor of 4.8 × 105 at the strain of 0.10%, which is more than 17.8 times larger than that of a conventional Schottky-barrier based strain sensor in control group as well as some existing ZnO nanowire or nanobelt based sensors. This work provides in-depth understanding for the basic mechanism of piezotronic modulation on tunneling junction, and realizes the highly sensitive strain sensor of piezotronic tunneling junction on device scale, which has great potential in advanced micro/nano-electromechanical devices and systems.
Usually, high temperature decreases the output performance of triboelectric nanogenerator because of the dissipation of triboelectric charges through the thermionic emission. Here, a temperature difference triboelectric nanogenerator is designed and fabricated to enhance the electrical output performance in high temperature environment. As the hotter friction layer’s temperature of nanogenerator is 0 K to 145 K higher than the cooler part’s temperature, the output voltage, current, surface charge density and output power are increased 2.7, 2.2, 3.0 and 2.9 times, respectively (from 315 V, 9.1 μA, 19.6 μC m−2, 69 μW to 858 V, 20 μA, 58.8 μC m−2, 206.7 μW). With the further increase of temperature difference from 145 K to 219 K, the surface charge density and output performance gradually decrease. At the optimal temperature difference (145 K), the largest output current density is 443 μA cm−2, which is 26.6% larger than the reported record value (350 μA cm−2).
A potentially enhanced radiation resistance of nanocrystalline materials, as a consequence of the high density of interfaces and surfaces, has attracted much attention both to understand the fundamental role of these defect sinks and to develop them for high-radiation environments. Here, irradiation response of nanocrystalline A 2 Ti 2 O 7 (A = Gd, Ho and Lu) pyrochlore powders with grain sizes of 20-30 nm was investigated by 1-MeV Kr 2+ ion bombardment. In situ transmission electron microscopy (TEM) revealed that the critical amorphization fluence for each nanocrystalline compound at room temperature was greater than that for their coarsegrained counterparts, indicating an enhanced amorphization resistance. The effect of temperature on the irradiation response of one of these compounds, nanocrystalline Lu 2 Ti 2 O 7 , was further examined by performing ion irradiation at an elevated temperature range of 480 to 600 K. The critical amorphization temperature (T c) was found to be noticeably higher in nanocrystalline Lu 2 Ti 2 O 7 (610 K) than its coarse-grained counterpart (480 K), revealing that nanocrystalline Lu 2 Ti 2 O 7 is less resistant to amorphization compared to its coarse-grained phase under high temperatures. We interpret these results with the aid of atomistic simulations. Molecular statics
The electromagnetic interference (EMI) shielding effectiveness (SE) of carbon nanotube (CNT) macro-film that is adhered to common cloth to maintain the light weight, silk-like quality, and smooth surface of the material for EMI shielding is investigated. The results show that a high and stable EMI SE of 48 dB to 57 dB at 40 GHz to 60 GHz was obtained by the macro-film with a thickness of only ∼4 μm. The composite CNT macro-film is easily manipulated, and its EMI property is significantly different from that of traditional electromagnetic shielding materials that show a lower EMI SE with increasing frequency. For example, the EMI SE of Cu foils decrease from 75 dB to 35 dB as frequency increases from 25 GHz to 60 GHz. Considering their stable and outstanding EMI SE and easy manipulation, the composite CNT macro-films are expected to have potential applications in shielding against millimeter waves.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.