Design of integrated power systems requires prototype-less approaches. Accurate simulations are necessary for analysis and verification purposes. Simulation relies on component models and associated parameters. The paper focuses on a step-by-step extraction procedure for the design parameters of a one-dimensional finite-element-method (FEM) model of the PiN diode. The design parameters are also available for diverse physics-based analytical models. The PiN diode remains a complex device to model particularly during switching transients. The paper demonstrates that a simple FEM model may be considered unknowingly of the device exact technology. Heterogeneous simulation is illustrated. The state-of-art of parameter extraction methods is briefly recalled. The proposed procedure is detailed. The diode model and extracted parameters are systematically validated from electro-thermal point-of-view. Validity domains are discussed.
This paper presents a novel and useful 3D nonlinear magnetostatic integral formulation for volume integral method. Like every other integral formulation, its main advantage is that it does not require air region mesh, only ferromagnetic regions being discretized. The formulation is based on magnetic flux density interpolation on facet elements. Special care is taken in order to accurately compute the singularity of Green's kernel. The application of an equivalent circuit approach allows preserving the solenoidality of magnetic induction. It is shown that the formulation is very accurate even if it is associated with coarse meshes. Thus, computation time can be very competitive. Computed results for the TEAM Workshop problem 13 and for a multiply-connected regions case-test are reported.
This paper presents an adapted partial element equivalent circuit (PEEC)-based methodology applied to the modeling of interconnections of power electronics devices. Although this method is already well known, the originality of this work is its use to model a device presenting an industrial complexity. To make possible this modeling, two adapted integral methods, based on two different meshings, are presented. They are dedicated respectively to the computation of parasitic inductances and capacitances and lead to an equivalent circuit of the system. From a time-domain simulation of this circuit, current and voltage sources can be extracted and used to compute the radiated near magnetic field. This approach has been applied to model a real industrial static converter via system couplings, a variable speed drive. Good agreements have been obtained between simulated and measured results on conducted and emitted electromagnetic analysis.Index Terms-Electromagnetic compatibility, fast multipole method, parasitic capacitances, parasitic elements, partial element equivalent circuit (PEEC), power electronics, power interconnections.
A volume integral formulation to compute eddy currents in non-magnetic conductive media is presented. The current distribution is approximated with facet finite elements. The formulation is general and leads to an equivalent lumped elements circuit. In order to ensure the solenoidality of the current distribution, an algorithm detecting the independent loops is then used for the resolution. The formulation is tested on TEAM workshop Problem 7. Even with coarse meshes, its accuracy is demonstrated.
International audienceWe present a performance analysis of a parallel implementation of preconditioned conjugate gradient solvers using graphic processing units with compute unified device architecture programming model. The solvers were optimized for the solution of sparse systems of equations arising from finite-element analysis of electromagnetic phenomena involved in the diffusion of underground currents in both steady state and under time-harmonic current excitation. We used both shifted incomplete Cholesky factorization and incomplete LU factorization as preconditioners. The results show a significant speedup using the graphics processing unit compared with a serial CPU implementation
A new integral formulation is presented, enabling the computation of resistive, inductive, and capacitive effects considering both conductors and dielectrics in the frequency domain. The considered application allows us to neglect any propagation effects and magnetic materials. In this paper, we will show how to improve the unstructured-partial element equivalent circuit approach to consider dielectric materials, keeping the same benefits. Results obtained with this formulation are compared to results from an industrial finite-element method software and measurements.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.