No abstract

No abstract

A three-dimensional (3-D) numerical modeling technique for solving problems involving superconducting materials is presented. The model is implemented in finite-element method software and is based on a recently developed 3-D formulation for general electromagnetic problems with solid conductors. It has been adapted for modeling of superconductors with nonlinear resistivity in 3-D, characterized by a power-law relation. It has first been compared with an existing and verified two-dimensional (2-D) model: Compared are the current density distribution inside the conductors and the self-field ac losses for different applied transport currents. Second, the model has been tested for computing the current distribution with typical 3-D geometries, such as corner-shaped and twisted superconductors. Finally, it has been used with two superconducting filaments in the presence of external magnetic field for verifying the existence of coupling currents. This effect deals with the finite length of the conductors and cannot be taken into account by 2-D models.

Different finite-element method (FEM) formulations have been developed in order to model the electromagnetic behavior of type-II superconductors. This paper presents a comparison between simulations with A-formulation models implemented in two FEM software packages (FLUX2D and FLUX3D) and a numerical method based on analytical model for superconductors in applied magnetic field. These models can be used for superconductors with complex geometry and power-law current-voltage characteristics. Simulated is a 37-filamentary tape with applied transport current in self-field and alternating current (ac) magnetic field parallel to the wide side of the tape. A good agreement is found between the ac-loss and current distributions obtained with the different models.

No abstract

No abstract

No abstract

No abstract