We investigated the dependence of electron mobility on the thickness of MoS2 nanosheets by fabricating bottom-gate single and few-layer MoS2 thin-film transistors with SiO2 gate dielectrics and Au electrodes. All the fabricated MoS2 transistors showed on/off-current ratio of ∼107 and saturated output characteristics without high-k capping layers. As the MoS2 thickness increased from 1 to 6 layers, the field-effect mobility of the fabricated MoS2 transistors increased from ∼10 to ∼18 cm2V−1s−1. The increased subthreshold swing of the fabricated transistors with MoS2 thickness suggests that the increase of MoS2 mobility with thickness may be related to the dependence of the contact resistance and the dielectric constant of MoS2 layer on its thickness.
Epitaxial Sc xAl1− xN thin films of ∼100 nm thickness grown on metal polar GaN substrates are found to exhibit significantly enhanced relative dielectric permittivity (εr) values relative to AlN. εr values of ∼17–21 for Sc mole fractions of 17%–25% ( x = 0.17–0.25) measured electrically by capacitance–voltage measurements indicate that Sc xAl1− xN has the largest relative dielectric permittivity of any existing nitride material. Since epitaxial Sc xAl1− xN layers deposited on GaN also exhibit large polarization discontinuity, the heterojunction can exploit the in situ high-K dielectric property to extend transistor operation for power electronics and high-speed microwave applications.
Epitaxial multilayer heterostructures of ScxAl1−xN/GaN with Sc contents x = 0.11–0.45 are found to exhibit significant differences in structural quality, chemical impurity levels, and electronic properties depending on the starting Sc source impurity levels. A higher purity source leads to a 2–3 orders of magnitude reduction in the carbon, oxygen, and fluorine unintentional doping densities in MBE-grown ScxAl1−xN/GaN multilayers. Electrical measurements of ScxAl1−xN/n+GaN single heterostructure barriers show a 5–7 orders of magnitude reduction in the electrical leakage for films grown with a higher purity Sc source at most Sc contents. The measured chemical and electrical properties of epitaxial ScxAl1−xN highlight the importance of the starting Sc source material purity for epitaxial device applications that need these highly piezoelectric and/or ferroelectric transition-metal nitride alloys.
Mn4N is a compound magnetic material that can be grown using MBE while exhibiting several desirable magnetic properties such as strong perpendicular magnetic anisotropy, low saturation magnetization, large domain size, and record high domain wall velocities. In addition to its potential for spintronic applications exploiting spin orbit torque with epitaxial topological insulator/ferromagnet bilayers, the possibility of integrating Mn4N seamlessly with the wide bandgap semiconductors GaN and SiC provides a pathway to merge logic, memory and communication components. We report a comparative study of MBE grown Mn4N thin films on four crystalline substrates: cubic MgO, and hexagonal GaN, SiC and sapphire. Under similar growth conditions, the Mn4N film is found to grow single crystalline on MgO and SiC, polycrystalline on GaN, and amorphous on sapphire. The magnetic properties vary on the substrates and correlate to the structural properties. Interestingly, the field dependent anomalous Hall resistance of Mn4N on GaN shows different behavior from other substrates such as a flipped sign of the anomalous Hall resistance.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.