No abstract

Hydrogen is an essential component in many industrial processes. As a result of the recent increase in the development of shale gas, steam reforming of shale gas has received considerable attention as a major source of H2, and the more efficient use of hydrogen is strongly demanded. Palladium is well known as a hydrogen-storage metal and an effective catalyst for reactions related to hydrogen in a variety of industrial processes. Here, we present remarkably enhanced capacity and speed of hydrogen storage in Pd nanocrystals covered with the metal-organic framework (MOF) HKUST-1 (copper(II) 1,3,5-benzenetricarboxylate). The Pd nanocrystals covered with the MOF have twice the storage capacity of the bare Pd nanocrystals. The significantly enhanced hydrogen storage capacity was confirmed by hydrogen pressure-composition isotherms and solid-state deuterium nuclear magnetic resonance measurements. The speed of hydrogen absorption in the Pd nanocrystals is also enhanced by the MOF coating.

Interface engineering has been recognized as one of the most promising strategies for regulating the physical and chemical properties of materials. However, constructing well‐defined nanointerfaces with efficient oxygen evolution reaction (OER) still remains a challenge. Herein, cross columnar NiTe nanoarrays supported on nickel foam are prepared. Subsequently, NiTe/NiS nanointerfaces are constructed by an ion‐exchange process. Importantly, the electrocatalytic performance for the OER can be facilitated by coupling NiTe and NiS. As a result, NiTe/NiS shows excellent OER activity with an ultralow overpotential of only 257 mV at a current density of 100 mA cm−2, and a Tafel slope of 49 mV dec−1 in 1.0 m KOH. The calculated and experimental results reveal that the strong electron interaction on nanointerfaces induces electronic structure modulation, which optimizes the binding energy of *OOH intermediates, thus improving the OER performance.

Bifunctional oxygen catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) with high activities and low‐cost are of prime importance and challenging in the development of fuel cells and rechargeable metal–air batteries. This study reports a porous carbon nanomaterial loaded with cobalt nanoparticles (Co@NC‐x/y) derived from pyrolysis of a Co/Zn bimetallic zeolitic imidazolite framework, which exhibits incredibly high activity as bifunctional oxygen catalysts. For instance, the optimal catalyst of Co@NC‐3/1 has the interconnected framework structure between porous carbon and embedded carbon nanotubes, which shows the superb ORR activity with onset potential of ≈1.15 V and half‐wave potential of ≈0.93 V. Moreover, it presents high OER activity that can be further enhanced to over commercial RuO2 by P‐doped with overpotentials of 1.57 V versus reversible hydrogen electrode at 10 mA cm−2 and long‐term stability for 2000 circles and a Tafel slope of 85 mV dec−1. Significantly, the nanomaterial demonstrates better catalytic performance and durability than Pt/C for ORR and commercial RuO2 and IrO2 for OER. These findings suggest the importance of a synergistic effect of graphitic carbon, nanotubes, exposed Co–Nx active sites, and interconnected framework structure of various carbons for bifunctional oxygen electrocatalysts.

Pd octahedrons and cubes enclosed by {111} and {100} facets, respectively, have been synthesized for investigation of the shape effect on hydrogen-absorption properties. Hydrogen-storage properties were investigated using in situ powder X-ray diffraction, in situ solid-state (2)H NMR and hydrogen pressure-composition isotherm measurements. With these measurements, it was found that the exposed facets do not affect hydrogen-storage capacity; however, they significantly affect the absorption speed, with octahedral nanocrystals showing the faster response. The heat of adsorption of hydrogen and the hydrogen diffusion pathway were suggested to be dominant factors for hydrogen-absorption speed. Furthermore, in situ solid-state (2)H NMR detected for the first time the state of (2)H in a solid-solution (Pd + H) phase of Pd nanocrystals at rt.

The stereochemistry of chiral-at-metal complexes is much more abundant, albeit complicated, than chiral-at-carbon compounds, but how to make use of stereolabile metal-centers remains a formidable challenge due to the highly versatile coordination geometry of metal ions and racemization/epimerization problem. We demonstrate herein a stepwise assembly of configurationally stable [Pd 6 (FeL 3 ) 8 ] 28+ (Δ/Λ-MOCs-42) homochiral octahedral cages from unstable D 3 -symmetry trischelate-Fe type metalloligands via strong face-directed stereochemical coupling and facile chiral-induced resolution processes based on stereodifferentiating host−guest dynamics. Kinetic studies reveal that the dissociation rate of MOC-42 cages is 100-fold slower than that of Femetalloligands and the racemization is effectively inhibited, making the cages retain their chirality over extended periods of time (>5 months) at room temperature. Recyclable enantioseparation of atropisomeric compounds has been successfully achieved, giving up to 88% ee.

Figure 4. Chronopotentiometry tests for Ni 0.75 Fe 0.25 BDC and RuO 2 (with a constant current density of 10 mA cm À2 ).

Accurately regulating the selectivity of the oxygen reduction reaction (ORR) is crucial to renewable energy storage and utilization, but challenging. A flexible alteration of ORR pathways on atomically dispersed Zn sites towards high selectivity ORR can be achieved by tailoring the coordination environment of the catalytic centers. The atomically dispersed Zn catalysts with unique O-and C-coordination structure (ZnO 3 C) or N-coordination structure (ZnN 4 ) can be prepared by varying the functional groups of corresponding MOF precursors. The coordination environment of as-prepared atomically dispersed Zn catalysts was confirmed by X-ray absorption fine structure (XAFs). Notably, the ZnN 4 catalyst processes a 4 e À ORR pathway to generate H 2 O. However, controllably tailoring the coordination environment of atomically dispersed Zn sites, ZnO 3 C catalyst processes a 2 e À ORR pathway to generate H 2 O 2 with a near zero overpotential and high selectivity in 0.1 M KOH. Calculations reveal that decreased electron density around Zn in ZnO 3 C lowers the d-band center of Zn, thus changing the intermediate adsorption and contributing to the high selectivity towards 2 e À ORR.