Bifunctional oxygen catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) with high activities and low‐cost are of prime importance and challenging in the development of fuel cells and rechargeable metal–air batteries. This study reports a porous carbon nanomaterial loaded with cobalt nanoparticles (Co@NC‐x/y) derived from pyrolysis of a Co/Zn bimetallic zeolitic imidazolite framework, which exhibits incredibly high activity as bifunctional oxygen catalysts. For instance, the optimal catalyst of Co@NC‐3/1 has the interconnected framework structure between porous carbon and embedded carbon nanotubes, which shows the superb ORR activity with onset potential of ≈1.15 V and half‐wave potential of ≈0.93 V. Moreover, it presents high OER activity that can be further enhanced to over commercial RuO2 by P‐doped with overpotentials of 1.57 V versus reversible hydrogen electrode at 10 mA cm−2 and long‐term stability for 2000 circles and a Tafel slope of 85 mV dec−1. Significantly, the nanomaterial demonstrates better catalytic performance and durability than Pt/C for ORR and commercial RuO2 and IrO2 for OER. These findings suggest the importance of a synergistic effect of graphitic carbon, nanotubes, exposed Co–Nx active sites, and interconnected framework structure of various carbons for bifunctional oxygen electrocatalysts.

Photocatalytic water splitting is a natural but challenging chemical way of harnessing renewable solar power to generate clean hydrogen energy. Here we report a potential hydrogen-evolving photochemical molecular device based on a self-assembled ruthenium–palladium heterometallic coordination cage, incorporating multiple photo- and catalytic metal centres. The photophysical properties are investigated by absorption/emission spectroscopy, electrochemical measurements and preliminary DFT calculations and the stepwise electron transfer processes from ruthenium-photocentres to catalytic palladium-centres is probed by ultrafast transient absorption spectroscopy. The photocatalytic hydrogen production assessments reveal an initial reaction rate of 380 μmol h−1 and a turnover number of 635 after 48 h. The efficient hydrogen production may derive from the directional electron transfers through multiple channels owing to proper organization of the photo- and catalytic multi-units within the octahedral cage, which may open a new door to design photochemical molecular devices with well-organized metallosupramolecules for homogenous photocatalytic applications.

The photoinduced regio- and enantioselective coupling of naphthols and derivatives thereof is achieved in the confined chiral coordination space of a Ru metalloligand based cage. The racemic or enantiopure cages encapsulate naphthol guests, which then undergo a regiospecific 1,4-coupling, rather than the normal 1,1-coupling, to form 4-(2-hydroxy-1-naphthyl)-1,2-napthoquinones; moderate stereochemical control is achieved with homochiral cages. The photoreactions proceed under both aerobic and anaerobic conditions but through distinct pathways that nevertheless involve the same radical intermediates. This unusual dimerization constitutes a very rare example of asymmetric induction in biaryl coupling by making use of coordination cages with dual functionality-photoredox reactivity and stereoselectivity.

The rapid growth in the global energy demand for space cooling requires the development of more efficient environmental chillers for which adsorption-based cooling systems can be utilized. Here, in this contribution, we explore sorbents for chiller use via a pore-engineering concept to construct analogs of the 1-dimensional pore metal−organic framework MOF-74 by using elongated organic linkers and stereochemistry control. The prepared pore-engineered MOFs show remarkable equilibrium adsorption of the selected fluorocarbon refrigerant that is translated to a modeled adsorption-based refrigeration cycle. To probe molecular level interactions at the origin of these unique adsorption properties for this series of Ni-MOFs, we combined in situ synchrotron X-ray powder diffraction, neutron powder diffraction, X-ray absorption spectroscopy, calorimetry, Fourier transform infrared techniques, and molecular simulations. Our results reveal the coordination of fluorine (of CH 2 F in R134a) to the nickel(II) open metal centers at low pressures for each Ni-MOF analog and provide insight into the pore filling mechanism for the full range of the adsorption isotherms. The newly designed Ni-TPM demonstrates exceptional R134a adsorption uptake compared to its parent microporous Ni-MOF-74 due to larger engineered pore size/volume. The application of this adsorption performance toward established chiller conditions yields a working capacity increase for Ni-TPM of about 400% from that of Ni-MOF-74, which combined with kinetics directly correlates to both a higher coefficient of performance and a higher average cooling capacity generated in a modeled chiller.

A sacrificial template strategy is developed for the synthesis of yolk-shell Au@ZIF-8 nanoreactor. The Au@ZIF-8 nanoreactor possesses single-crystalline metal-organic framework (MOF) shell with intrinsic monodisperse micropores and introduced macropores. In each of the macropores, one Au NP is encapsulated to form a nanoreactor unit. The quantity of the reactor units in the MOF shell can be readily regulated. Such structure features of the Au@ZIF-8 nanoreactor facilitate the size selectivity of reactants, the accessibility of Au nanoparticles to reactants, and the mass transfer of reactants and products. As a result, the Au@ZIF-8 nanoreactor delivers excellent size selectivity, enhanced conversion, and good cycling stability when used to catalyze the aerobic oxidation of alcohols with different molecular size.

To combine flexibility and modifiability towards a more controllable complexity of MOFs, a post-synthetic variable-spacer installation (PVSI) strategy is used to implement kinetic installation/ uninstallation of secondary ligands into/from a robust yet flexible proto-Zr-MOF. This PVSI process features precise positioning of spacers with different length, size, number, and functionality, enabling accurate fixation of successive breathing stages and fine-tuning of pore surface. It shows unprecedented synthetic tailorability to create complicated MOFs in a predictable way for property modification, for example, CO2 and R22 adsorption/separation, thermal/chemical stability, and extended breathing behavior.

No abstract

Although the photodimerization of acenaphthylene (ACE) has been known for 100 years, the asymmetric cycloaddition of its 1‐substituted derivatives is unknown. Herein, we report a supramolecular photochirogenic approach in which a homochiral and photoactive Δ/Λ‐[Pd6(RuL3)8]28+ metal–organic cage (Δ/Λ‐MOC‐16) is used as a supramolecular reactor for the enantioselective exited‐state photocatalysis of 1‐Br‐ACE. Owing to preorganization of the substrates by the supramolecular cage, stereochemical control of the triplet state, and nanospace transfer of energy and chirality, the cycloaddition of ACE proceeded with high selectivity for the formation of anti over syn stereoisomers, whereas the regio‐, stereo‐, and enantioselective cycloaddition of unsymmetrical 1‐Br‐ACE showed effective enantiodifferentiation of a pair of anti head‐to‐head stereoisomers. The enzyme‐mimicking photocatalysis was verified by catalytic turnover, rate enhancement, and competing‐guest inhibition experiments.