Pectinolytic bacteria are responsible for significant economic losses by causing diseases on numerous plants. New methods are required to control and limit their spread. One possibility is the application of silver nanoparticles (AgNPs) that exhibit well-established antibacterial properties. Here, we synthesized AgNPs, stabilized by pectins (PEC) or sodium dodecyl sulphate (SDS), using a direct current atmospheric pressure glow discharge (dc-APGD) generated in an open-to-air and continuous-flow reaction-discharge system. Characterization of the PEC-AgNPs and SDS-AgNPs with UV/Vis absorption spectroscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, and selected area electron diffraction revealed the production of spherical, well dispersed, and face cubic centered crystalline AgNPs, with average sizes of 9.33 ± 3.37 nm and 28.3 ± 11.7 nm, respectively. Attenuated total reflection-Fourier transformation infrared spectroscopy supported the functionalization of the nanostructures by PEC and SDS. Antibacterial activity of the AgNPs was tested against Dickeya spp. and Pectobacterium spp. strains. Both PEC-AgNPs and SDS-AgNPs displayed bactericidal activity against all of the tested isolates, with minimum inhibitory concentrations of 5.5 mg∙L−1 and 0.75–3 mg∙L−1, respectively. The collected results suggest that the dc-APGD reaction-discharge system can be applied for the production of defined AgNPs with strong antibacterial properties, which may be further applied in plant disease management.
Development of efficient plant protection methods against bacterial phytopathogens subjected to compulsory control procedures under international legislation is of the highest concern having in mind expensiveness of enforced quarantine measures and threat of the infection spread in disease-free regions. In this study, fructose-stabilized silver nanoparticles (FRU-AgNPs) were produced using direct current atmospheric pressure glow discharge (dc-APGD) generated between the surface of a flowing liquid anode (FLA) solution and a pin-type tungsten cathode in a continuous flow reaction-discharge system. Resultant spherical and stable in time FRU-AgNPs exhibited average sizes of 14.9 ± 7.9 nm and 15.7 ± 2.0 nm, as assessed by transmission electron microscopy (TEM) and dynamic light scattering (DLS), respectively. Energy dispersive X-ray spectroscopy (EDX) analysis revealed that the obtained nanomaterial was composed of Ag while selected area electron diffraction (SAED) indicated that FRU-AgNPs had the face-centered cubic crystalline structure. The fabricated FRU-AgNPs show antibacterial properties against Erwinia amylovora, Clavibacter michiganensis, Ralstonia solanacearum, Xanthomonas campestris pv. campestris and Dickeya solani strains with minimal inhibitory concentrations (MICs) of 1.64 to 13.1 mg L−1 and minimal bactericidal concentrations (MBCs) from 3.29 to 26.3 mg L−1. Application of FRU-AgNPs might increase the repertoire of available control procedures against most devastating phytopathogens and as a result successfully limit their agricultural impact.
Breast cancer remains the most common type of cancer, occurring in middle-aged women, and often leads to patients’ death. In this work, we applied a cold atmospheric pressure plasma (CAPP)-based reaction-discharge system, one that is unique in its class, for the production of CAPP-activated media (DMEM and Opti-MEM); it is intended for further uses in breast cancer treatment. To reach this aim, different volumes of DMEM or Opti-MEM were treated by CAPP. Prepared media were exposed to the CAPP treatment at seven different time intervals and examined in respect of their impact on cell viability and motility, and the induction of the apoptosis in human non-metastatic (MCF7) and metastatic (MDA-MB-231) breast cancer cell lines. As a control, the influence of CAPP-activated media on the viability and motility, and the type of the cell death of the non-cancerous human normal MCF10A cell line, was estimated. Additionally, qualitative and quantitative analyses of the reactive oxygen and nitrogen species (RONS), generated during the CAPP operation in contact with analyzed media, were performed. Based on the conducted research, it was found that 180 s (media activation time by CAPP) should be considered as the minimal toxic dose, which significantly decreases the cell viability and the migration of MDA-MB-231 cells, and also disturbs life processes of MCF7 cells. Finally, CAPP-activated media led to the apoptosis of analyzed cell lines, especially of the metastatic MDA-MB-231 cell line. Therefore, the application of the CAPP system may be potentially applied as a therapeutic strategy for the management of highly metastatic human breast cancer.
Skin injury leading to chronic wounds is of high interest due to the increasing number of patients suffering from this symptom. Proliferation, migration, and angiogenesis are key factors in the wound healing processes. For that reason, controlled promotion of these processes is required. In this work, we present the portable helium-dielectric barrier discharge (He-DBD)-based reaction-discharge system of controlled gas temperature for biological activities. To make this He-DBD-based reaction-discharge system safe for biological purposes, a multivariate optimization of the operating parameters was performed. To evaluate the effect of the He-DBD operating parameters on the rotational gas temperature T rot (OH), a design of experiment followed by a Response Surface Methodology was applied. Based on the suggested statistical model, the optimal operating conditions under which the T rot (OH) is less than 37 °C (310 K) were estimated. Then, the resulted model was validated in order to confirm its accuracy. After estimation the optical operating conditions of He-DBD operation, the spectroscopic characteristic of the He-DBD-based reaction-discharge system in relevance to the several optical temperatures in addition to electron number density has been carried out. Additionally, the qualitative and quantitative analyses of the reactive oxygen species and reactive nitrogen species were performed in order to investigate of reactions and processes running in the He-DBD-gaseous phase and in the He-DBD-treated liquid. Next, the developed portable He-DBD-based reaction-discharge system, working under the optimal operating conditions, was used to stimulate the wound healing process. It was found that a 30 s He-DBD treatment significantly increased the proliferation, migration, and angiogenesis of keratinocytes (HaCaT) and fibroblasts (MSU-1.1) cell lines, as well as human skin microvascular endothelial cells (HSkMEC.2). Hence, the application of the cold atmospheric pressure plasma generated in this He-DBD-based reaction-discharge system might be an alternative therapy for patient suffering from chronic wounds. Keywords Wound healing • Angiogenesis • Migration • Proliferation • Cold atmospheric pressure plasma Abbreviations BBD Box-Behnken design Anna Dzimitrowicz and Aleksandra Bielawska-Pohl have equally contributed to this work.
Poly(vinylpyrrolidone)-stabilized Pt nanoparticles (PVP-PtNPs) were produced in a continuous-flow reaction-discharge system by application of direct current atmospheric pressure glow discharge (dc-APGD) operated between the surface of a flowing liquid anode (FLA) and a pin-type tungsten cathode. Synthesized PVP-PtNPs exhibited absorption across the entire UV/Vis region. The morphology and elemental composition of PVP-PtNPs were determined with transmission electron microscopy (TEM) and energy dispersive X-ray scattering (EDX), respectively. As assessed by TEM, PVP-PtNPs were approximately spherical in shape, with an average size of 2.9 ± 0.6 nm. EDX proved the presence of Pt, C, and O. Dynamic light scattering (DLS) and attenuated total reflectance Fourier transform-infrared spectroscopy (ATR FT-IR) confirmed PtNPs functionalization with PVP. As determined by DLS, the average size of PtNPs stabilized by PVP was 111.4 ± 22.6 nm. A fluid containing resultant PVP-PtNPs was used as a heat conductive layer for a spiral radiator managing heat generated by a simulated internal combustion chamber. As compared to water, the use of PVP-PtNPs enhanced efficiency of the system, increasing the rate of heat transfer by 80% and 30% during heating and cooling, respectively.
Plant pathogenic bacteria cause significant economic losses in the global food production sector. To secure an adequate amount of high-quality nutrition for the growing human population, novel approaches need to be undertaken to combat plant disease-causing agents. As the currently available methods to eliminate bacterial phytopathogens are scarce, we evaluated the effectiveness and mechanism of action of a non-thermal atmospheric pressure plasma (NTAPP). It was ignited from a dielectric barrier discharge (DBD) operation in a plasma pencil, and applied for the first time for eradication of Dickeya and Pectobacterium spp., inoculated either on glass spheres or mung bean seeds. Furthermore, the impact of the DBD exposure on mung bean seeds germination and seedlings growth was estimated. The observed bacterial inactivation rates exceeded 3.07 logs. The two-minute DBD exposure stimulated by 3-4% the germination rate of mung bean seeds and by 13.4% subsequent early growth of the seedlings. On the contrary, a detrimental action of the four-minute DBD subjection on seed germination and early growth of the sprouts was noted shortly after the treatment. However, this effect was no longer observed or reduced to 9.7% after the 96 h incubation period. Due to the application of optical emission spectrometry (OES), transmission electron microscopy (TEM), and confocal laser scanning microscopy (CLSM), we found that the generated reactive oxygen and nitrogen species (RONS), i.e., N2, N2+, NO, OH, NH, and O, probably led to the denaturation and aggregation of DNA, proteins, and ribosomes. Furthermore, the cellular membrane disrupted, leading to an outflow of the cytoplasm from the DBD-exposed cells. This study suggests the potential applicability of NTAPPs as eco-friendly and innovative plant protection methods.
Phytohemagglutinin has been used to enhance the red cell-mediated microinjection of macromolecules into monolayer cultures of mammalian cells. The simple procedure described should promote the wider use of this microinjection technique.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.