Electron beam lithography presents a great opportunity for bit-patterned media (BPM) applications due to its resolution capability and placement accuracy. However, there are still many challenges associated with this application including tool availability, resist capability, process development, and associated metrology needs. This paper will briefly discuss these challenges and show the results of sub-25 nm pitch (1 Tdots∕in.2) patterning from both a simulation and experimental perspective. The simulation results indicate that the energy contrast between the exposed and unexposed areas goes down quickly as the pitch size gets smaller and smaller, making it more difficult for image formation of high-resolution dot patterning. The strategy to overcome this issue is to optimize the development process, which aims at increasing the resist contrast and enlarging the process window. By using this approach, the authors have successfully demonstrated a pitch resolution down to 18 nm for a positive-tone resist ZEP520 and 12 nm for a negative-tone resist silsesquioxane, corresponding to the areal density of ∼2.0 and ∼4.5 Tdots∕in.2, respectively. Using the ZEP520 resist process, a Cr dot array with a pitch of 21 nm (∼1.5 Tdots∕in.2) for template fabrication is demonstrated. High-quality scanning electron microscopy and atomic force microscopy images were used as primary metrology for both the dot size uniformity and the placement accuracy analysis.
Low molecular weight P2VP-b-PS-b-P2VP triblock copolymer (poly(2-vinlypyridine)-block-polystyrene-block-poly(2-vinylpyridine)] is doped with copper chloride and microphase separated into lamellar line patterns with ultrahigh area density. Salt-doped P2VP-b-PS-b-P2VP triblock copolymer is self-assembled on the top of the nanoimprinted photoresist template, and metallic nanowires with long-range ordering are prepared with platinum-salt infiltration and plasma etching.
The combination of solvent annealing, surface reconstruction, and a tone-reversal etching procedure provides an attractive approach to utilize block copolymer (BCP) lithography to fabricate highly ordered and densely packed silicon oxide nano-dots on a surface. The obtained silicon oxide nano-dots feature an areal density of 1.3 teradots inch(-2) .
We propose a novel strategy to integrate the nanoimprint lithography (NIL) technique with directed self-assembly (DSA) of block copolymer (BCP) for providing a robust, high-yield, and low-defect-density path to sub-20 nm dense patterning. Through this new NIL-DSA method, UV nanoimprint resist is used as the DSA copolymer pre-pattern to expedite the DSA process. This method was successfully used to fabricate a 1.0 Td in(-2) servo-integrated nanoimprint template for bit-patterned media (BPM) application. The fabricated template was used for UV-cure NIL on a 2.5-inch disk. The imprint resist patterns were further transferred into the underlying CoCrPt magnetic layer through a carbon hard mask using ion beam etching. The successful integration of the NIL technique with the DSA process provides us with a new route to BPM nanofabrication, which includes the following three major advantages: (1) a simpler and faster way to implement DSA for high-density BPM patterning; (2) a novel method for fabricating a high-quality dot pattern template through an iterative imprint-DSA-template procedure; and (3) an uncomplicated integration scheme for implementing non-periodic servo features with BCP patterns, thus accelerating the transition of moving the DSA technique from laboratory research to the BPM manufacturing environment.
Directed self-assembly (DSA) of block copolymer (BCP) holds great promise for many applications in nanolithography, including the next generation magnetic recording. In this work, directed self-assembly of block copolymer technique has been combined with rotary stage electron beam mastering to fabricate a circular full track nanoimprint template for bit patterned media (BPM) fabrication. In order to meet specific requirements in pattern structure and format between the data and the servo zone in a servo-integrated template, three types of lithographically defined prepatterns, (1) two-dimensional chemical pre-pattern, (2) twodimensional low-topographic pre-pattern, and (3) one-dimensional high-topographic pre-pattern, have been explored for DSA process with two types of commercially available BCP thin film materials: cylinder-forming poly(styrene-b-methyl methacrylate) (PS-b-PMMA) and sphere-forming poly(styrene-b-dimethylsiloxane) (PS-b-PDMS). All guided BCP patterns exhibit highly ordered hexagonal close-packed (hcp) structures with high pattern quality. Using these BCP patterns, two polarities of dots-array templates (hole-tone and pillar-tone) with integrated servo patterns have been fabricated on a fused silica substrate at a density greater than 1.0 Td/in 2. Furthermore, the fabricated master template has been used for UV-cure nanoimprint lithography process development on 2.5 inch disk size media. Good pattern uniformity in imprint resist has been achieved over an entire 2.4 mm wide band area. The imprint resist patterns have been further transferred into underlying CoCrPt media by ion beam etching. Evidently, for the first time, the patterned CoCrPt alloy dots (hcp pattern) have successfully been demonstrated at a high density of 1.5 Td/in 2 (pitch = 22.3 nm) for a guided media (≅ 7 kOe) and 3.2 Td/in 2 (pitch = 15.2 nm) for an unguided media (≅ 5 kOe).
A hybrid directed self-assembly approach is developed to fabricate unprecedented servo-integrated bit-patterned media templates, by combining sphere-forming block copolymers with 5 teradot/in.(2) resolution capability, nanoimprint and optical lithography with overlay control. Nanoimprint generates prepatterns with different dimensions in the data field and servo field, respectively, and optical lithography controls the selective self-assembly process in either field. Two distinct directed self-assembly techniques, low-topography graphoepitaxy and high-topography graphoepitaxy, are elegantly integrated to create bit-patterned templates with flexible embedded servo information. Spinstand magnetic test at 1 teradot/in.(2) shows a low bit error rate of 10(-2.43), indicating fully functioning bit-patterned media and great potential of this approach for fabricating future ultra-high-density magnetic storage media.
The directed self-assembly of block copolymers (BCPs) is a promising route to generate highly ordered arrays of sub-10 nm features. Ultradense arrays of a monolayer of spherical microdomains or cylindrical microdomains oriented parallel to the surface have been produced where the lateral ordering is guided by surface patterning and the lattice defined by the patterning can be commensurate or incommensurate with the natural period of the BCP. Commensurability between the two can be used to elegantly manipulate the lateral ordering and orientation of the BCP microdomains so as to form well-aligned arrays of 1D nanowires or 2D addressable nanodots. No modification of the substrate surface, aside from the patterning, was used, making the influence of lattice mismatch and pattern amplification on the size, shape and pitch of the BCP microdomains more transparent. A skew angle between incommensurate lattices, defining a stretching or compression of the BCP chains to compensate for the lattice mismatch, is presented.
The effect of lubricant on flyability and read-write performance in ultra-low flying regime has been studied over the disks with lubricant on one half of disk surface thicker than the other half. The dynamics of a slider was monitored using Acoustic Emission (AE) and Laser Doppler Vibrometer (LDV). An instability characteristic of a slider flying over the thick lubricant region has been observed and this instability intensifies as flying height decreases and the step thickness increases. After the slider flies over the disks, it has been found that lubricant re-distribution occurs as lubricant is “carried” by the flying slider from the thick lubricant region and deposited onto the thin lubricant region. Possible mechanisms were discussed to explain the observations. Finally, recording tests were performed and the magnetic spacing loss due to the lubricant steps was estimated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.