Abstract. The aim of the present investigation was to evaluate microemulsion as a vehicle for dermal drug delivery and to develop microemulsion-based gel of terbinafine for the treatment of onychomycosis. Doptimal mixture experimental design was adopted to optimize the amount of oil (X 1 ), Smix (mixture of surfactant and cosurfactant; X 2 ) and water (X 3 ) in the microemulsion. The formulations were assessed for globule size (in nanometers; Y 1 ) and solubility of drug in microemulsion (in milligrams per milliliter; Y 2 ). The microemulsion containing 5.75% oil, 53.75% surfactant-cosurfactant mixture and 40.5% water was selected as the optimized batch. The globule size and solubility of the optimized batch were 18.14 nm and 43.71 mg/ml, respectively. Transmission electron microscopy showed that globules were spherical in shape. Drug containing microemulsion was converted into gel employing 0.75% w/w carbopol 934P. The optimized gel showed better penetration and retention in the human cadaver skin as compared to the commercial cream. The cumulative amount of terbinafine permeated after 12 h was 244.65±18.43 μg cm −2 which was three times more than the selected commercial cream. Terbinafine microemulsion in the gel form showed better activity against Candida albicans and Trichophyton rubrum than the commercial cream. It was concluded that drug-loaded gel could be a promising formulation for effective treatment of onychomycosis.
Onychomycosis is one of the most common nail disorders. It affects 10-30% of the world population and is caused by dermatophytes, non-dermatophytes, molds, and yeasts. Present treatment methods of onychomycosis include oral therapy, topical therapy, and a combination of both; they have mild-to-moderate efficacy, with a relapse and reinfection rate of 20-25%. For oral therapy, newer antifungal compounds (azole class and allylamine class) are being investigated to increase efficacy and minimize side effects. Oral therapy with antifungal agents have severe side effects, with lesser bioavailability and longer duration of treatment. By contrast, topical therapy of onychomycosis is associated with greater patient compliance and fewer systemic side effects and drug interactions. Current topical treatment options of onychomycosis are nail lacquers, ointments, lotions, solutions, and gels, but these formulations have been unsuccessful due to poor penetration and distribution of drugs at the infected site. Therefore, novel therapeutic options are constantly being researched to improve the efficacy of onychomycosis treatment by enhancing the permeation of the drug across the nail to reach the infected site. Various physical and chemical enhancement methods have been studied to increase the permeation of drugs across the nail plate to the nail bed. Device-based therapeutic options have also been investigated to increase the antifungal drug concentration and its effects in the onychomycotic nail. Randomized clinical trials of these novel therapies have demonstrated better efficacy. The present review discusses the anatomy of the human nail, onychomycosis and its types, onycholysis, and conventional and novel therapies. We also review patents granted as well as design challenges facing optimal drug formulation for onychomycosis treatment.
Direct compression, although simple in terms of the unit operations involved, is highly influenced by powder characteristics such as flowability, compressibility and dilution potential. Tablets consist of active drugs and excipients, and no drug substance or excipient possesses all the desired physico-mechanical properties required for the development of a robust direct-compression manufacturing process, which could be smoothly scaled from the laboratory to production scale. Most formulations (70-80 %) contain ex- Metformin hydrochloride exhibits poor compressibility during compaction, often resulting in weak and unacceptable tablets with a high tendency to cap. The purpose of this study was to develop directly compressible metformin hydrochloride by the spray-drying technique in the presence of polymer. Metformin hydrochloride was dissolved in solutions containing a polymer, namely polyvinylpyrrolidone (PVP K30), in various concentrations ranging from 0-3 % (m/V). These solutions were employed for spray-drying. Spray-dried drug was evaluated for yield, flow property and compressibility profile. Metformin hydrochloride spray-dried in the presence of 2 % PVP K30 showed an excellent flow property and compressibility profile. From the calculated Heckel's parameter (Py = 2.086), it was demonstrated that the treated drug showed better particle arrangement in the initial compression stage. Kawakita analysis revealed better packability of the treated drug compared to the untreated drug. Differential scanning calorimetry and Fourier transform infrared spectroscopy experiments showed that the spray-dried drug did not undergo any chemical modifications. Tablets made from the spray-dried drug (90 %, m/m) were evaluated for crushing strength, friability and disintegration time and the results were found satisfactory.
Onychomycosis is the most common nail disease affecting nail plate and nail bed. Onychomycosis causes onycholysis which creates cavity between the nail plate and nail bed, where drug formulations could be applied, providing a direct contact of drug with the nail bed facilitating drug delivery on the infected area. The purpose of the present study was to design and evaluate the potential of microemulsion-based gel as colloidal carrier for itraconazole for delivery into onycholytic nails for effective treatment of onychomycosis. Itraconazole-loaded microemulsions were prepared and optimized using D-optimal design. The microemulsion containing 6.24 % oil, 36 % Smix, and 57.76 % water was selected as the optimized batch (MEI). The globule size and drug loading of the optimized batch were 48.2 nm and 12.13 mg/ml, respectively. Diffused reflectance FTIR studies were performed to study drug-excipient incompatibility. Ex vivo permeation studies were carried out using bovine hoof and human cadaver skin as models for nail plate and nail bed, respectively. Microemulsion-based itraconazole gel (MBGI) showed better penetration and retention in human skin as well as bovine hoof as compared to commercial preparation (market formulation, MFI). The cumulative amount of itraconazole permeated from the MBGI after 12 h was 73.39 ± 3.55 μg cm(-2) which was 1.8 times more than MF. MBGI showed significantly higher ex vivo antifungal activity (P < 0.05) against Candida albicans and Trichophyton rubrum when compared to MFI. Stability studies showed that MBGI was stable at refrigeration and room temperature for 3 months. It was concluded that drug-loaded gel could be a promising formulation for effective treatment of onychomycosis.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.