Blast-related traumatic brain injury is the most prevalent injury for combat personnel seen in the current conflicts in Iraq and Afghanistan, yet as a research community,we still do not fully understand the detailed etiology and pathology of this injury. Finite element (FE) modeling is well suited for studying the mechanical response of the head and brain to blast loading. This paper details the development of a FE head and brain model for blast simulation by examining both the dilatational and deviatoric response of the brain as potential injury mechanisms. The levels of blast exposure simulated ranged from 50 to 1000 kPa peak incident overpressure and 1–8 ms in positive-phase duration, and were comparable to real-world blast events. The frontal portion of the brain had the highest pressures corresponding to the location of initial impact, and peak pressure attenuated by 40–60% as the wave propagated from the frontal to the occipital lobe. Predicted brain pressures were primarily dependent on the peak overpressure of the impinging blast wave, and the highest predicted brain pressures were 30%less than the reflected pressure at the surface of blast impact. Predicted shear strain was highest at the interface between the brain and the CSF. Strain magnitude was largely dependent on the impulse of the blast, and primarily caused by the radial coupling between the brain and deforming skull.The largest predicted strains were generally less than 10%,and occurred after the shock wave passed through the head.For blasts with high impulses, CSF cavitation had a large role in increasing strain levels in the cerebral cortex and periventricular tissues by decoupling the brain from the skull. Relating the results of this study with recent experimental blast testing suggest that a rate-dependent strain-based tissue injury mechanism is the source primary blast TBI.

Pretorque of the head and neck increases facet capsular strains, supporting its role in the whiplash mechanism. Although the facet capsule does not appear to be at risk for gross injury during normal bending motions, a small portion of the population may be at risk for subcatastrophic injury.

No abstract

No abstract

No abstract

Investigators currently lack the data necessary to define the state of skeletal muscle properties within cadaveric specimens. The purpose of this study is to define the temporal changes in the postmortem properties of skeletal muscle as a function of mechanical loading and freezer storage. The tibialis anterior of the New Zealand white rabbit was chosen for study. Modulus and no-load strain were found to vary significantly from live after eight hours postmortem. Following the changes that occur during rigor mortis, a stable region of postmortem, post-rigor properties occurred between 36 to 72 hours postmortem. A freeze-thaw process was not found to have a significant effect on the post-rigor response. The first loading cycle response of post-rigor muscle was unrepeatable but stiffer than live passive muscle. After preconditioning, the post-rigor muscle response was repeatable. The preconditioned post-rigor response was less stiff than the live passive response due to a significant increase in no-load strain. Failure properties of postmortem muscle were found to be significantly different from live passive muscle with a significant decrease in failure stress (61 percent) and energy (81 percent), while failure strain was unchanged. These results suggest that the post-rigor response of cadaveric muscle is unaffected by freezing but sensitive to even a few cycles of mechanical loading.

No abstract

The larger retractions observed in surprised females likely produce larger tissue strains and may increase injury potential. Aware human subjects may not replicate the muscle response, kinematic response, or whiplash injury potential of unprepared occupants in real collisions.