The aim of this study is to prepare and characterize two types of silver-functionalized carbon nanofiber (CNF) composite electrodes, i.e., silver-decorated CNF-epoxy and silver-modified natural zeolite-CNF-epoxy composite electrodes suitable for ibuprofen detection in aqueous solution. Ag carbon nanotube composite electrode exhibited the best electroanalytical parameters through applying preconcentration/differential-pulsed voltammetry scheme.
The electrochemical oxidation and determination of diclofenac sodium (DCF) at Cu-doped zeolite-modified expanded graphite-epoxy composite (CuZEGE) electrode was evaluated for a new alternative of quantitative determination of sodium diclofenac in aqueous solutions. Cyclic voltammetry was used to characterize the electrochemical behaviour of the electrode in the presence of diclofenac sodium in a 0.1 M NaOH supporting electrolyte. This modified electrode exhibited electrocatalytic effect towards sodium diclofenac oxidation, allowing its determination in aqueous solution. The linear dependence of the current versus diclofenac concentration was obtained using cyclic voltammetry, chronoamperometry, differential-pulsed voltammetry. The limit of detection for DCF reached by direct analysis on CuZEGE is from 2 10 À5 to 3 10 À7 M in relation with used technique and the potential value. Substantial enhancement of the electroanalytical parameters, e.g. the limit of detection of 5 10 À8 M. for the determination of DCF at CuZEGE electrode was reached by applying a chemical preconcentration step prior to voltammetric quantification.
The aim of this study was the preparation, characterization, and application of a multi-wall carbon nanotubes-epoxy composite electrode (MWCNT-EP) with 25%, wt. MWCNTs loading for the voltammetric/amperometric determination of pentachlorophenol (PCP) in aqueous solutions. The structural and morphological aspects of the MWCNT-EP composite electrode were examined by scanning electron microscopy. The electrical properties were characterized by direct-current conductivity measurements in relation with the percolation threshold. The electrochemical behavior of PCP at the MWCNT-EP composite electrode was investigated using cyclic voltammetry in 0.1 M Na2SO4 supporting electrolyte in order to establish the parameters for amperometric/voltammetric determination of PCP. The linear dependence of current vs. PCP concentrations was reached in a wide concentration range from 0.2 to 12 μM PCP using cyclic voltammetry, differential-pulsed voltammetry, square-wave voltammetry, chronoamperometry, and multiple-pulsed amperometry techniques. The best electroanalytical performances of this composite electrode were achieved using a pre-concentration/square-wave voltammetric technique and also multiple-pulsed amperometry techniques envisaging the practical applications. The ease of preparation, high sensitivity, and stability of this composite electrode should open novel avenues and applications for fabricating robust sensors for detection of many important species.
A novel electrochemical glucose sensor was developed, based on a multiwall carbon nanotubes (MWCNTs)-copper-1,3,5-benzenetricarboxylic acid (CuBTC)-epoxy composite electrode, named MWCNT-CuBTC. The electrode nanocomposite was prepared by a two-roll mill procedure and characterized morphostructurally by scanning electron microscopy (SEM). The CuBTC formed defined crystals with a wide size distribution, which were well dispersed and embedded in the MWCNTs. Its electrical conductivity was determined by four-point probe contact (DC) conductivity measurements. The electroactive surface area, determined using cyclic voltammetry (CV), was found to be 6.9 times higher than the geometrical one. The results of the electrochemical measurements using CV, linear sweep voltammetry (LSV), differential pulse voltammetry (DPV), chronoamperometry (CA) and multiple pulse amperometry (MPA) showed that the MWCNT-CuBTC composite electrode displayed high electrocatalytic activity toward the oxidation of glucose and, as a consequence, very high sensitivity. The best sensitivity of 14,949 µAmM−1cm−1 was reached using MPA at the potential value of 0.6 V/SCE, which was much higher in comparison with other copper-based electrodes reported in the literature. The good analytical performance, low cost and simple preparation method make this novel electrode material promising for the development of an effective glucose sensor.
In this paper, the obtaining, characterization and testing of a new electrocatalyst composite electrode based on multi-wall carbon nanotubes and silver-exchanged natural zeolite (MWCNT-AgZ) for non-enzymatic oxidation and determination of glycerol is reported. The electroanalytical sensitivity for the determination of glycerol at the MWCNT-AgZ electrode ranged from 0.051 to 0.386 mA/mM as a function of the electrochemical technique used, and the highest sensitivity was reached for linear-sweep voltammetry. The recovery studies indicated the possibility to determine glycerol in real samples.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.