Polylactic acid (PLA) is a biodegradable polyester polymer that is produced from renewable resources, such as corn or other carbohydrate sources. However, its poor toughness limits its commercialization. PLA composites can meet the growing performance needs of various fields, but limited research has focused on their sustainable applications in sports. This paper reviews the latest research on PLA and its composites by describing the characteristics, production, degradation process, and the latest modification methods of PLA. Then, it discusses the inherent advantages of PLA composites and expounds on different biodegradable materials and their relationship with the properties of PLA composites. Finally, the importance and application prospects of PLA composites in the field of sports are emphasized. Although PLA composites mixed with natural biomass materials have not been mass produced, they are expected to be sustainable materials used in various industries because of their simple process, nontoxicity, biodegradability, and low cost.
Driven by various environmental and economic factors, it is emerging to adopt an efficient and sustainable strategy to recycle carbon fibers (rCFs) from carbon fiber-reinforced polymer (CFRP) wastes and reuse them in high-value applications. This review summarized the latest progress of CFRP waste recycling methods (including mechanical, chemical, and thermal methods), discussed their advantages and disadvantages, influence parameters and possible environmental effects, and their potential effects on the mechanical and surface chemical properties of rCFs. In addition, the latest optimization schemes of leading recycling technologies were detailed. According to the literature, CFs are the key points in the structural support of semiconductor-based recyclable photocatalytic systems and the enhancement of performance, which means that rCFs have high reuse potential in sustainable photocatalysis. Therefore, this paper also emphasized the possibility and potential value of reusing recovered fibers for developing recyclable photocatalytic products, which may be a new way of reuse in environmental purification often ignored by researchers and decision-makers in the field of CFs.
At present, high-performance carbon fibers (CFs) are mainly produced from petroleum-based materials. However, the high costs and environmental problems of the production process prompted the development of new precursors from natural biopolymers. This review focuses on the latest research on the conversion of natural lignocellulosic biomass into precursor fibers and CFs. The influence of the properties, advantages, separation, and extraction of lignin and cellulose (the most abundant natural biopolymers), as well as the spinning process on the final CF performance are detailed. Recent strategies to further improve the quality of such CFs are discussed. The importance and application of CFs in sports equipment manufacturing are briefly summarized. While the large-scale production of CFs from natural lignocellulosic biomass and their applications in sports equipment have not yet been realized, CFs still provide a promising market prospect as green and low-cost materials. Further research is needed to ensure the market entry of lignocellulosic biomass-based CFs.
Skeletal muscles exhibit excellent properties due to their well-developed microstructures. Taking inspiration from nature that thick filaments and thin filaments are linked by “cross-bridges”, leading to good stability and ion transport performance of muscles. In this work, extracted poplar lignin and microcrystalline cellulose (MCC) were connected by biomimetic covalent bonds, akin to biological muscle tissue, in which isophorone diisocyanate was used as the chemical crosslinking agent. Then, poplar lignin–MCC was mixed with polyacrylonitrile to serve as the precursor for electrospinning. The results show that due to the effective covalent-bond connection, the precursor fibers possess excellent morphology, smooth surface, good thermal stability, and high flexibility and toughness (average elongation-at-break is 51.84%). Therefore, after thermal stabilization and carbonization, derived lignocellulose-based carbon fibers (CFs) with a reduced cost, complete fiber morphology with a uniform diameter (0.48 ± 0.22 μm), and high graphitization degree were obtained. Finally, the electrodes fabrication and electrochemical testing were carried out. The results of electrochemical impedance spectroscopy (EIS) indicate that the Rs and Rct values of CFs supercapacitors are 1.18 Ω and 0.14 Ω, respectively. Results of cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) suggest that these CFs demonstrate great application potential in electrochemical materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.