Covalent organic frameworks (COFs) have attracted growing interest by virtue of their structural diversity and tunability. Herein, we present a novel approach for the development of organic rechargeable battery cathodes in which three distinct redox-active COFs were successfully prepared and delaminated into 2D few-layer nanosheets. Compared with the pristine COFs, the exfoliated COFs with shorter Li diffusion pathways allow a significant higher utilization efficiency of redox sites and faster kinetics for lithium storage. Unlike diffusion-controlled manners in the bulk COFs, the redox reactions in ECOFs are mainly dominated by charge transfer process. The capacity and potential are further engineered by reticular design of COFs without altering the underlying topology. Specifically, DAAQ-ECOF exhibits excellent rechargeability (98% capacity retention after 1800 cycles) and fast charge-discharge ability (74% retention at 500 mA g as compared to at 20 mA g). DABQ-ECOF shows a specific capacity of 210 mA h g and a voltage plateau of 2.8 V.

The current advances, structure-property relationship and future perspectives in covalent organic frameworks (COFs) and their nanosheets for electrochemical energy storage (EES) and conversion (EEC) are summarized.

A simple and efficient approach is developed for the synthesis of copper oxide nanorods with different morphology and crystallographic structure. Polycrystalline fine rods 10−20 nm thick and several hundred nanometers long and single crystalline thick rods 60−100 nm thick and up to 1 μm long were obtained from the reactions of copper hydrate with caustic soda solution at room temperature and 100 °C, respectively. The fine CuO nanorods as anode materials for Li ion battery exhibit a high electrochemical capacity of 766 mA h/g and relatively poor capacity retention as compared to thick nanorods with the single crystalline structure. The correlation between the structural features of the nanorods and their electrode performance is discussed in detail.