No abstract

In this article a comprehensive description and performance of the double Penning trap setup JYFLTRAP will be detailed. The setup is designed for atomic mass measurements of both radioactive and stable ions and additionally serves as a very high resolution mass separator. The setup is coupled to the IGISOL facility at the accelerator laboratory of the University of Jyväskylä. The trap has been online since 2003 and it was shut down in summer 2010 for relocation to upgraded IGISOL facility. Numerous atomic mass and decay energy measurements have been performed using the time-of-flight ion-cyclotron resonance technique. Also the trap has been used in several decay spectroscopy experiments as a high-resolution mass filter.

No abstract

The masses of very neutron-deficient nuclides close to the astrophysical rp-and νp-process paths have been determined with the Penning trap facilities JYFLTRAP at JYFL/Jyväskylä and SHIP-TRAP at GSI/Darmstadt. Isotopes from yttrium (Z = 39) to palladium (Z = 46) have been produced in heavy-ion fusion-evaporation reactions. In total 21 nuclides were studied and almost half of the mass values were experimentally determined for the first time:88 Tc,

The nuclides 104-108Sn, 106-110Sb, 108,109Te, and 111I at the expected endpoint of the astrophysical rp process have been produced in 58Ni+natNi fusion-evaporation reactions at IGISOL and their mass values were precisely measured with the JYFLTRAP Penning trap mass spectrometer. For 106Sb, 108Sb, and 110Sb these are the first direct experimental mass results obtained. The related one-proton separation energies have been derived and the value for 106Sb, Sp=424(8) keV, shows that the branching into the closed SnSbTe cycle in the astrophysical rp process is weaker than expected.

The feeding probability of 102;104;105;106;107 Tc, 105 Mo, and 101 Nb nuclei, which are important contributors to the decay heat in nuclear reactors, has been measured using the total absorption technique. We have coupled for the first time a total absorption spectrometer to a Penning trap in order to obtain sources of very high isobaric purity. Our results solve a significant part of a long-standing discrepancy in the component of the decay heat for 239 Pu in the 4-3000 s range. DOI: 10.1103/PhysRevLett.105.202501 PACS numbers: 23.40.Às, 27.60.+j, 28.41.Fr, 29.30.Kv Nuclear reactors provide a significant fraction of the world's electricity. A burgeoning population and an associated growth in economic activity suggest that world demand will double by 2050. Until now, the bulk of this has come from the burning of fossil fuels. There is general concern that reserves of fossil fuels are limited and their burning damages the environment. In particular, it contributes to the emission of large amounts of CO 2 . In this context, nuclear power, based on the fission process, will be less damaging to the environment. Accordingly there is now a renaissance in the building of nuclear power stations around the world. Modern reactor designs, based on many years of operating experience, are much more efficient, more economical, and safer than earlier designs. Although the basic principles are well established, we still lack certain information, such as a knowledge of the decay properties of specific nuclei that are important contributors to the heating of the reactor during and after operation. The estimation and control of the heat emitted by the decay of fission products plays a key role in the safe operation of reactors. The primary aim of this work is to study the decay properties of specific nuclei that are important contributors to this source of heat.Approximately 8% of the total energy generated during the fission process is related to the energy released in the natural decay of fission products, and is commonly called decay heat [1]. Once the reactor is shut down, the energy released in radioactive decay provides the main source of heating. Hence, coolant needs to be maintained after termination of the neutron-induced fission process in a reactor, and the form and extent of this essential requirement needs to be specified on the basis of decay-heat summation calculations. Decay heat varies as a function of time after shutdown and can be determined theoretically from known nuclear data. Such computations are based on the inventory of nuclei created during the fission process and after reactor shutdown and their radioactive decay characteristics:where fðtÞ is the power function, E i is the mean decay energy of the ith nuclide ( , , and components), i is the decay constant of the ith nuclide, and N i ðtÞ is the number of nuclide i at cooling time t. These calculations require extensive libraries of cross sections, fission yields, and decay data. Obviously, an accurate assessment of the decay heat is highly relevant...

No abstract

The antineutrino spectra measured in recent experiments at reactors are inconsistent with calculations based on the conversion of integral beta spectra recorded at the ILL reactor. 92 Rb makes the dominant contribution to the reactor antineutrino spectrum in the 5-8 MeV range but its decay properties are in question. We have studied 92 Rb decay with total absorption spectroscopy. Previously unobserved beta feeding was seen in the 4.5-5.5 region and the GS to GS feeding was found to be 87.5(25)%. The impact on the reactor antineutrino spectra calculated with the summation method is shown and discussed.