A new molecular conjugation method has been developed to label biomolecules with optically stable metalorganic luminophores, such as tris(2,2'-bipyridyl)dichlororuthenium(II) hexahydrate (Rubpy), which are otherwise not possible for direct linking with the biomolecules. Unique biochemical properties of the biomolecule can, thus, be associated with photostable luminophores. This opens a general way to conjugate desired biomolecules using a sensitive signal transduction method. It also promotes the application of excellent luminescent materials, especially those based on photostable metalorganic luminophores, in biochemical analysis and biomolecular interaction studies. The conjugation method is based on uniform luminophore-doped silica (LDS) nanoparticles (63 +/- 4 nm). These nanoparticles have been prepared using a water-in-oil (W/O) microemulsion method. The controlled hydrolysis of tetraethyl orthosilicate (TEOS) in W/O microemulsion leads to the formation of monodisperse LDS nanoparticles. The luminophores are doped inside the nanoparticles, and the particle's silica surfaces can be used to covalently bind with biomolecules. The luminophores are well-protected from the environmental oxygen when they are doped inside the silica network. As an example, we used an antibody for leukemia cell recognition. The antibody was first immobilized onto the luminophore-doped nanoparticle through silica chemistry and then was used for leukemia cell identification by an optical microscopy imaging technique. The leukemia cells were identified easily, clearly, and with high efficiency using these antibody-coated nanoparticles. The advantages of using small, uniform luminophore-doped nanoparticles are discussed.

A water-in-oil microemulsion method has been applied for the preparation of silica-coated iron oxide nanoparticles. Three different nonionic surfactants (Triton X-100, Igepal CO-520, and Brij-97) have been used for the preparation of microemulsions, and their effects on the particle size, crystallinity, and the magnetic properties have been studied. The iron oxide nanoparticles are formed by the coprecipitation reaction of ferrous and ferric salts with inorganic bases. A strong base, NaOH, and a comparatively mild base, NH4OH, have been used in each surfactant to observe whether the basicity has some influence on the crystallization process during particle formation. Transmission electron microscopy, X-ray electron diffraction, and superconducting quantum interference device magnetometry have been employed to study both uncoated and silica-coated iron oxide nanoparticles. All these particles show magnetic behavior close to that of superparamagnetic materials. By use of this method, magnetic nanoparticles as small as 1-2 nm and of very uniform size (percentage standard deviation is less than 10%) have been synthesized. A uniform silica coating as thin as 1 nm encapsulating the bare nanoparticles is formed by the base-catalyzed hydrolysis and the polymerization reaction of tetraethyl orthosilicate in microemulsion. All experimental results are also compared with those for particles synthesized in pure water.

No abstract

In this report, we demonstrate the biochemical modification of silica based nanoparticles. Both pure and dye-doped silica nanoparticles were prepared, and their surfaces were modified with enzymes and biocompatible chemical reagents that allow them to function as biosensors and biomarkers. The nanoparticles produced in this work are uniform in size with a 1.6% relative standard deviation. They have a pure silica surface and can thus be modified easily with many biomolecules for added biochemical functionality. Specifically, we have modified the nanoparticle surfaces with enzyme molecules (glutamate dehydrogenase (GDH) and lactate dehydrogenase (LDH)) and a biocompatible reagent for cell membrane staining. Experimental results show that the silica nanoparticles are a good biocompatible solid support for enzyme immobilization. The immobilized enzyme molecules on the nanoparticle surface have shown excellent enzymatic activity in their respective enzymatic reactions. The nanoparticle surface biochemical functionalization demonstrates the feasibility of using nanoparticles for biosensing and biomarking applications.

Ultra-small (3.1 nm) multifunctional CdS:Mn/ZnS core-shell semiconductor quantum dots (Qdots), which possess fluorescent, radio-opacity, and paramagnetic properties, have been shown here. To demonstrate in vivo bioimaging capability, a rat was administered endovascularly with Qdots conjugated with a TAT peptide. The labeling efficacy of these Qdots was demonstrated on the basis of the histological analysis of the microtome sliced brain tissue, clearly showing that TAT-conjugated Qdots stained brain blood vessels.

We report the development of novel luminescent nanoparticles composed of inorganic luminescent dye, Tris(2,2'-bipyridyl) dichlororuthenium (II) hexahydrate, doped inside a silica network. These dye doped silica (DDS) nanoparticles have been synthesized using a water-in-oil microemulsion technique in which controlled hydrolysis of the tetraethyl orthosilicate leads to the formation of monodispersed nanoparticles. They are prepared with a variety of sizes: small (5+/-1 nm), medium (63+/-4 nm), and large (400+/-10 nm), which shows the efficiency of the microemulsion technique for the synthesis of uniform nanoparticles. All these nanoparticles are suitable for biomarker application since they are much smaller than cellular dimension. These nanoparticles are highly photostable in comparison to most commonly used organic dyes. These nanoparticles have been characterized by various microscopic and spectroscopic techniques. The amount of dye content in these nanoparticles has been optimized to eliminate self-quenching. It has been observed that maximum luminescence intensity is achieved when the dye content is around 20 wt%. Silica surface of DDS nanoparticles is available for surface modification and bioconjunction. For demonstration as a biomarker, the DDS nanoparticle's surface has been biochemically modified to attach membrane-anchoring groups and applied successfully to stain human leukemia cells.

Water-in-oil (w/o) microemulsion synthesis of 70 nm size monodisperse TAT (a cell penetrating peptide, CPP) conjugated, FITC (fluorescein isothiocyanate) doped silica nanoparticles (TAT-FSNPs) is reported; human lung adenocarcinoma (A549) cells (in vitro) and rat brain tissue (in vivo) were successfully labeled using TAT-FSNPs.

New methods to identify trace amount of infectious pathogens rapidly, accurately and with high sensitivity are in constant demand to prevent epidemics and loss of lives. Early detection of these pathogens to prevent, treat and contain the spread of infections is crucial. Therefore, there is a need and urgency for sensitive, specific, accurate, easy-to-use diagnostic tests. Versatile biofunctionalized engineered nanomaterials are proving to be promising in meeting these needs in diagnosing the pathogens in food, blood and clinical samples. The unique optical and magnetic properties of the nanoscale materials have been put to use for the diagnostics. In this review, we focus on the developments of the fluorescent nanoparticles, metallic nanostructures and superparamagnetic nanoparticles for bioimaging and detection of infectious microorganisms. The various nanodiagnostic assays developed to image, detect and capture infectious virus and bacteria in solutions, food or biological samples in vitro and in vivo are presented and their relevance to developing countries is discussed.