Oksida grafena adalah turunan dari grafena yang mudah disintesis dan aplikasi yang sangat luas. Penelitian ini bertujuan menyintesisoksida grafena dari arang tempurung kelapa yang memiliki karakter partikel nano karbon sebagai antibakteri dan antioksidan. Oksida grafena dari arang tersebut berhasil disintesis dengan rendemen 1,85% b/b menggunakan modifikasi metode Hummers dengan ukuran rataan partikel 33,7 nm. Gugus fungsi beroksigen pada spektrum inframerah pada bilangan gelombang 2933 cm-1 dan 1615 cm-1 menandakan oksida grafena berhasil terbentuk. Puncak difraksi sinar X 23,5o dan kristalinitas sebesar 6,85%. Derajat kristalinitas yang rendah menunjukan bahwa oksida grafena memiliki fasa amorf. Aktivitas antioksidan ditentukan berdasarkan kemampuannya mereduksi besi(III) dan hasil sintesis memperlihatkan aktivitas antioksidan sebesar 50% dibanding standar. Hasil pengujian antibakteri ditandai dengan terbentuknya zona bening terhadap bakteri Escherichia coli dan Staphylococcus aureus sehingga oksida grafena memiliki aktivitas antibakteri namun tergolong lemah.
Jig and Fixture bor 45 derajat adalah alat untuk menepatkan mata bor pada bagian benda kerja yang telah diatur derajat kemiringannya sebesar 45 derajat untuk dilakukan pengeboran. Penelitian ini bertujuan untuk merancang dan menganalisis secara simulasi kekuatan rangka (frame) dan rangkaian (assembly) keseluruhan dengan variasi posisi penempatan serta beban mulai dari 100 kg sampai dengan 500 kg. Dengan menggunakan fitur Stress Analysis yang dilengkapi dengan metode finite element analysis (FEA) dapat diketahui luaran berupa von misses stress, lendutan (displacement), dan faktor keamanan (safety factor). Rangka alat ini menggunakan baja karbon hollow 20 mm x 20 mm, bahan dari besi carbon (steel carbon). Panjang rangka adalah 300 mm, lebar adalah 300 mm, tinggi adalah 270 mm dengan dimensi keseluruhan adalah 300 mm x 300 mm x 270 mm. Hasil analisis simulasi faktor keamanan rangka maksimum adalah 7,08 dengan beban 100 kg, dan minimum adalah 1.42 dengan beban 500 kg, sedangkan faktor keamanan rangkaian keseluruhan maksimum adalah 3.88 dengan beban 100 kg, dan minimum adalah 0.82 dengan beban 500 kg. Lokasi tidak aman untuk rangka pada bagian sambungan atas, sedangkan untuk rangkaian keseluruhan pada bagian komponen poros penyangga. Kata kunci : Jig, Fixture, rangka, von misses stress, lendutan, faktor keamanan. Study of strength analysis simulation of jig and fixture 45 degree bore
Indonesia is a turpentine producer country. So far, only one factory is carrying out turpentine fractionation to increase its selling price. Chemical conversion is necessary to produce more valuable derivatives of this renewable biomass-based material. In this experiment, turpentine as the raw material and the four products: α-pinene, β-pinene, limonene, and δ-carene were reacted successively with sulfuric acid, hydrochloric acid, nitric acid, and ethereal boron trifluoride, respectively. The reaction products were further irradiated using a commercial microwave oven. The raw material composition, functional group, and ultraviolet absorption were analyzed using a gas chromatograph, Fourier transforms infrared spectrophotometer, and UV-Vis spectrophotometer, respectively. Half of the reaction products were neutralized with sodium bicarbonate whether or not it irradiated. All products which viscous colored liquid was examined on their ultraviolet and infrared spectrum. The turpentine reacted with sulfuric acid and boron trifluoride ethereal produced a brownish viscous liquid, but did not react with hydrochloric acid and nitric acid. The reaction products with sulfuric acid and boron trifluoride ethereal and microwave irradiation processes showed some shifts on the infrared spectra, particularly in C=C band due to to the polymerization and C=C reforming reaction. The products also demonstrate the presence of OH group in the infrared spectra.
Polimer merupakan material yang banyak dijadikan komposit sekarang ini. Teknologi nano dapat berperan sebagai agen komposit yang lebih baik dari pada agen komposit konvensional. C-dot yang merupakan material nano yang dikompositkan dengan polimer alam dan sintetik dengan model berturut-turut karagenan dan poli(vinilpirolidon) (PVP). Pada penelitian ini C-dot disintesis dari asam sitrat dan urea dengan iradiasi gelombang mikro, kemudian produk dimurnikan dan dikarakterisasi. Karagenan diekstraksi dari rumput laut Eucheuma cottonii. Selanjutnya polimer dan C-dot dikompositkan dengan metode Gel-Casting. Sintesis C-dot dari asam sitrat dan urea menghasilkan larutan berwarna hitam yang menandakan C-dot terbentuk, terdapat absorbsi di panjang gelombang 340 nm pada daerah UV yang membuktikan C-dot berhasil disintesis karena serapan tersebut tidak ditemukan pada bahan baku. C-dot yang disintesis memiliki ukuran partikel 90,61 nm dan indeks polidispersitas (PI) sebesar 0,0396. Komposit C-dot dengan polimer dapat meningkatkan kuat tarik dan modulus elastisitas film polimer. Konsentrasi optimum C-dot sebagai pengisi (filler) untuk PVP sebesar 0,7% b/b dan Karagenan 1.5% b/b. C-dot dapat berperan sebagai pengisi (filler) dalam kuat tarik pada film polimer. Penambahan C-dot pada film polimer sintetik maupun alam dapat meningkatkan sifat mekanik dari film polimer dan tidak memberikan hasil yang berbeda.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.