Two-dimensional (2D) transition metal carbides and nitrides (MXenes) have shown outstanding performances in electrochemical energy storage and many other applications. Delamination of MXene flakes in water produces colloidal solutions that are used to manufacture all kinds of products (thin films, coatings, and electrodes, etc.). However, the stability of MXene colloidal solutions, which is of critical importance to their application, remains largely unexplored. Here we report on the degradation of delaminated-Ti3C2T x colloidal solutions (T represents the surface functionalities) and outline protocols to improve their stability. Ti3C2T x MXene solutions in open vials degraded by 42%, 85%, and 100% after 5, 10, and 15 days, respectively, leading to the formation of cloudy-white colloidal solutionss containing primarily anatase (TiO2). On the other hand, the solution could be well-preserved when Ti3C2T x MXene colloidal solutionss were stored in hermetic Ar-filled bottles at 5 °C, because dissolved oxygen, the main oxidant of the MXene flakes, was eliminated. Under such a recipe, the time constant of the solution was dramatically increased. We have found that the degradation starts at the edges and its kinetics follows the single-exponential decay quite well. Moreover, we performed size selection of the MXene solution via a cascade technique and showed that the degradation process is also size-dependent, with the small flakes being the least stable. Furthermore, a dependence between the degradation time constants and the flake size allows us to determine the size of the nanosheets in situ from UV–vis spectra and vice versa. Finally, the proposed method of storing the MXene colloidal solution in Ar-filled vials was applied to Ti2CT x to improve its stability and time constant, demonstrating the validity of this protocol in improving the lifetime of different MXene solutions.
2D transition metal carbides and/or nitrides (MXenes), by virtue of high electrical conductivity, abundant surface functional groups and excellent dispersion in various solvents, are attracting increasing attention and showing competitive performance in energy storage and conversion applications. However, like other 2D materials, MXene nanosheets incline to stack together via van der Waals interactions, which lead to limited number of active sites, sluggish ionic kinetics, and finally ordinary performance of MXene materials/devices. Constructing 2D MXene nanosheets into 3D architectures has been proven to be an effective strategy to reduce restacking, thus providing larger specific surface area, higher porosity, and shorter ion and mass transport distance over normal 1D and 2D structures. In this review, the commonly used strategies for manufacturing 3D MXene architectures (3D MXenes and 3D MXene-based composites) are summarized, such as template, assembly, 3D printing, and other methods. Special attention is also given to the structure-property relationships of 3D MXene architectures and their applications in electrochemical energy storage and conversion, including supercapacitors, rechargeable batteries, and electrocatalysis. Finally, the authors propose a brief perspective on future opportunities and challenges for 3D MXene architectures/devices.
The ongoing miniaturization of devices and development of wireless and implantable technologies demand electromagnetic interference (EMI)‐shielding materials with customizability. Additive manufacturing of conductive polymer hydrogels with favorable conductivity and biocompatibility can offer new opportunities for EMI‐shielding applications. However, simultaneously achieving high conductivity, design freedom, and shape fidelity in 3D printing of conductive polymer hydrogels is still very challenging. Here, an aqueous Ti3C2‐MXene‐functionalized poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate ink is developed for extrusion printing to create 3D objects with arbitrary geometries, and a freeze–thawing protocol is proposed to transform the printed objects directly into highly conductive and robust hydrogels with high shape fidelity on both the macro‐ and microscale. The as‐obtained hydrogel exhibits a high conductivity of 1525.8 S m–1 at water content up to 96.6 wt% and also satisfactory mechanical properties with flexibility, stretchability, and fatigue resistance. Furthermore, the use of the printed hydrogel for customizable EMI‐shielding applications is demonstrated. The proposed easy‐to‐manufacture approach, along with the highlighted superior properties, expands the potential of conductive polymer hydrogels in future customizable applications and represents a real breakthrough from the current state of the art.
The development of new and more accurate fabrication technologies has, in the past few years, boosted interest in advanced device manufacturing. 2D materials, thanks to their diverse properties and dispersibility in liquid carriers, constitute a rich toolbox for ink-based applications. However, the lack of standardized production methods offering a good compromise between performance and affordability has so far been a limiting factor for the application of 2D inks. In this Review, we provide a comprehensive description of the steps involved in device fabrication for different applications, from material selection and ink formulation to printing strategies and device assembly. We conclude with a critical overview of the main scientific and technical limitations currently faced by 2D inks and the related printing technologies and discuss their market penetration and implementation stage. TOC: Two-dimensional materials are some of the best candidates for printed technologies. This review provides an insightful overview on inks formulation processes, from materials selection and deposition techniques to applications. Future commercialization of printed devices is also thoroughly discussed. [H1] IntroductionLayered materials are a diverse group of materials exhibiting a broad spectrum of electronic, electrochemical and photonic properties 1-3 . Despite the interest of these bulk properties, the true potential of layered materials is unlocked when they are exfoliated to 2D layers 4 .
Luminescent defects in hexagonal boron nitride (h-BN) have recently emerged as a promising platform for non-classical light emission. On-chip solutions, however, require techniques for controllable in-situ manipulation of quantum light. Here, we demonstrate the dynamic spectral and temporal tuning of the optical emission from h-BN via moving acoustomechanical modulation induced by stimulated phonons. When perturbed by the propagating acoustic phonon, the optically probed radiative h-BN defects are periodically strained and their sharp emission lines are modulated by the deformation potential coupling. This results in an acoustically driven spectral tuning within a 2.5-meV bandwidth. Our findings, supported by first-principles theoretical calculations, reveal exceptionally high elasto-optic coupling in h-BN of~50 meV/%. Temporal control of the emitted photons is achieved by combining the acoustically mediated fine-spectral tuning with spectral detection filtering. This study opens the door to the use of sound for scalable integration of h-BN emitters in nanophotonic and quantum information technologies.
The photocatalytic activity of different titanium oxide nanowires containing gold (Au@TiONWs), and gold-graphene (Au@TiONWs-graphene), was evaluated by studying the reaction of hydrogen production by water splitting under UV-vis light. The composites showed high surface areas, with values above 300 m per gram, even after the incorporation of gold and graphene on the surface of titanium oxide nanowires. The highest hydrogen production of Au@TiONWs was 1436 μmol h g, under irradiation at 400 nm, and with a gold loading of 10 wt %. This photocatalytic activity was 11.5 times greater than that shown by the unmodified TiONWs. For the Au@TiONWs-graphene composites, the highest hydrogen amount obtained was 1689 μmol h g, at loadings of 10 and 1 wt % of gold and graphene, respectively. The photocatalytic activity of the gold-graphene compounds was 1.2 times greater than that shown by the titanium oxide catalysts and 13.5 times higher than the bare TiONWs. Even at wavelengths greater than 500 nm, the compounds exhibited yields of hydrogen above 1000 μmol h g, demonstrating the high catalytic activity of the compounds. In addition, TiO-based materials are of great interest for energy storage and conversion devices, in particular for rechargeable lithium ion batteries. TiO has a significant advantage due to its low volume change (<4%) during the Li ion insertion/desertion process, short paths for fast lithium ion diffusion, and large exposed surface, offering more lithium insertion channels. However, the relatively low theoretical capacity and electrical conductivity of TiO greatly hamper its practical application. In this work, free-standing electrodes composed by TiONWs and carbon nanotubes, CNT@TiONWs, were used as anode materials for Li-ion batteries. As a result, the electronic conductivity and mechanical properties of the composite were greatly improved and a good cycling performance was obtained in these batteries. This research shows the potential of TiO-based materials for the development of new catalysts for hydrogen production and energy storage systems.
At present, the world is at the peak of production of traditional fossil fuels. Much of the resources that humanity has been consuming (oil, coal, and natural gas) are coming to an end. The human being faces a future that must necessarily go through a paradigm shift, which includes a progressive movement towards increasingly less polluting and energetically viable resources. In this sense, nanotechnology has a transcendental role in this change. For decades, new materials capable of being used in energy processes have been synthesized, which undoubtedly will be the cornerstone of the future development of the planet. In this review, we report on the current progress in the synthesis and use of one-dimensional (1D) nanostructured materials (specifically nanowires, nanofibers, nanotubes, and nanorods), with compositions based on oxides, nitrides, or metals, for applications related to energy. Due to its extraordinary surface–volume relationship, tunable thermal and transport properties, and its high surface area, these 1D nanostructures have become fundamental elements for the development of energy processes. The most relevant 1D nanomaterials, their different synthesis procedures, and useful methods for assembling 1D nanostructures in functional devices will be presented. Applications in relevant topics such as optoelectronic and photochemical devices, hydrogen production, or energy storage, among others, will be discussed. The present review concludes with a forecast on the directions towards which future research could be directed on this class of nanostructured materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.