Rapid and precise discrimination of various odorants is vital to fabricating enhanced sensing devices in the fields of disease diagnostics, food safety, and environmental monitoring. Here, we demonstrate an ultrasensitive and flexible field-effect transistor (FET) olfactory system, namely, a bioelectronic nose (B-nose), based on plasma-treated bilayer graphene conjugated with an olfactory receptor. The stable p- and n-type behaviors from modified bilayer graphene (MBLG) took place after controlled oxygen and ammonia plasma treatments. It was integrated with human olfactory receptors 2AG1 (hOR2AG1: OR), leading to the formation of the liquid-ion gated FET-type platform. ORs bind to the particular odorant amyl butyrate (AB), and their interactions are specific and selective. The B-noses behave as flexible and transparent sensing devices and can recognize a target odorant with single-carbon-atom resolution. The B-noses are ultrasensitive and highly selective toward AB. The minimum detection limit (MDL) is as low as 0.04 fM (10(-15); signal-to-noise: 4.2), and the equilibrium constants of OR-oxygen plasma-treated graphene (OR-OG) and ammonia plasma-treated graphene (-NG) are ca. 3.44 × 10(14) and 1.47 × 10(14) M(-1), respectively. Additionally, the B-noses have long-term stability and excellent mechanical bending durability in flexible systems.

Mercury (Hg) is highly toxic but has been widely used for numerous domestic applications, including thermometers and batteries, for decades, which has led to fatal outcomes due to its accumulation in the human body. Although many types of mercury sensors have been developed to protect the users from Hg, few methodologies exist to analyze Hg(2+) ions in low concentrations in real world samples. Herein, we describe the fabrication and characterization of liquid-ion gated field-effect transistor (FET)-type flexible graphene aptasensor with high sensitivity and selectivity for Hg. The field-induced responses from the graphene aptasensor had excellent sensing performance, and Hg(2+) ions with very low concentration of 10 pM could be detected, which is 2-3 orders of magnitude more sensitive than previously reported mercury sensors using electrochemical systems. Moreover, the aptasensor showed a highly specific response to Hg(2+) ions in mixed solutions. The flexible graphene aptasensor showed a very rapid response, providing a signal in less than 1 s when the Hg(2+) ion concentration was altered. Specificity to Hg(2+) ions was demonstrated in real world samples (in this case samples derived from mussels). The aptasensor was fabricated by transferring chemical vapor deposition (CVD)-grown graphene onto a transparent flexible substrate, and the structure displayed excellent mechanical durability and flexiblility. This graphene-based aptasensor has potential for detecting Hg exposure in human and in the environment.

Tailoring the morphology of materials in the nanometer regime is vital to realizing enhanced device performance. Here, we demonstrate flexible nerve agent sensors, based on hydroxylated poly(3,4-ethylenedioxythiophene) (PEDOT) nanotubes (HPNTs) with surface substructures such as nanonodules (NNs) and nanorods (NRs). The surface substructures can be grown on a nanofiber surface by controlling critical synthetic conditions during vapor deposition polymerization (VDP) on the polymer nanotemplate, leading to the formation of multidimensional conducting polymer nanostructures. Hydroxyl groups are found to interact with the nerve agents. Representatively, the sensing response of dimethyl methylphosphonate (DMMP) as a simulant for sarin is highly sensitive and reversible from the aligned nanotubes. The minimum detection limit is as low as 10 ppt. Additionally, the sensor had excellent mechanical bendability and durability.

Ultrafine metal-oxide-decorated hybrid carbon nanofibers (CNFs) were fabricated by a single-nozzle co-electrospinning process using a phase-separated mixed polymer composite solution and heat treatment. To decorate metal oxides on the CNF surface, core (PAN) and shell (PVP) structured nanofibers (NFs) were fabricated as starting materials. The core-shell NF structure was prepared by single-nozzle co-electrospinning because of the incompatibility of the two polymers. Ultrafine hybrid CNFs were then formed by decomposing the PVP phase, converting the metal precursors to metal oxide nanonodules, and transforming the PAN to CNFs of ca. 40 nm diameter during heat treatment. The decoration morphology of the metal oxide nanonodules could be controlled by precursor concentration in the PVP solution. These ultrafine hybrid CNFs were applied to a dimethyl methylphosphonate (DMMP) chemical sensor at room temperature with excellent sensitivity. The minimum detectable level (MDL) of hybrid CNFs was as low as 0.1 ppb, which is 10-100 times higher than for a chemical sensor based on carbon nanotubes. This is because the metal oxide nanonodules of hybrid CNFs increase the surface area and affinity to DMMP vapor. Our new synthetic methodology promises to be an effective approach to fabricating hybrid CNF/inorganic nanostructures for future sensing technologies.

Graphene-based field-effect transistors (FETs) have been developed rapidly and are currently considered as an alternative for postsilicon electronics. In this study, polypyrrole-converted nitrogen-doped few-layer graphene (PPy-NDFLG) was grown on Cu substrate by chemical vapor deposition combined with vapor deposition polymerization and then transferred onto a flexible substrate. Furthermore, antivascular endothelial growth factor (VEGF) RNA aptamer conjugated PPy-NDFLG was integrated into a liquid-ion gated FET geometry to fabricate a high-performance VEGF aptamer-based sensor. Field-induced high sensitivity was observed for the analyte-binding events, eventually leading to the recognition of the target molecules at an unprecedentedly low concentration (100 fM). Additionally, the aptasensor had excellent reusability, mechanical bendability, and durability in the flexible process. The developed methodology describes, for the first time, the fabrication of N-doped graphene using conducting polymers including heteroatoms in their structures as the carbonization precursor and demonstrates its use in a high-performance, flexible FET-type aptasensor to detect vascular endothelial growth factor as a cancer biomarker.

No abstract

Abstract:Conducting polymer (CP) hybrids, which combine CPs with heterogeneous species, have shown strong potential as electrical transducers in chemosensors. The charge transport properties of CPs are based on chemical redox reactions and provide various chemo-electrical signal transduction mechanisms. Combining CPs with other functional materials has provided opportunities to tailor their major morphological and physicochemical properties, often resulting in enhanced sensing performance. The hybrids can provide an enlarged effective surface area for enhanced interaction and chemical specificity to target analytes via a new signal transduction mechanism. Here, we review a selection of important CPs, including polyaniline, polypyrrole, polythiophene and their derivatives, to fabricate versatile organic and inorganic hybrid materials and their chemo-electrical sensing performance. We focus on what benefits can be achieved through material hybridization in the sensing application. Moreover, state-of-the-art trends in technologies of CP hybrid sensors are discussed, as are limitations and challenges.

Although over 30 common genetic susceptibility loci have been identified to be independently associated with coronary artery disease (CAD) risk through genome-wide association studies (GWAS), genetic risk variants reported to date explain only a small fraction of heritability. To identify novel susceptibility variants for CAD and confirm those previously identified in European population, GWAS and a replication study were performed in the Koreans and Japanese. In the discovery stage, we genotyped 2123 cases and 3591 controls with 521 786 SNPs using the Affymetrix SNP Array 6.0 chips in Korean. In the replication, direct genotyping was performed using 3052 cases and 4976 controls from the KItaNagoya Genome study of Japan with 14 selected SNPs. To maximize the coverage of the genome, imputation was performed based on 1000 Genome JPT+CHB and 5.1 million SNPs were retained. CAD association was replicated for three GWAS-identified loci (1p13.3/SORT1 (rs599839), 9p21.3/CDKN2A/2B (rs4977574), and 11q22.3/ PDGFD (rs974819)) in Koreans. From GWAS and a replication, SNP rs3782889 showed a strong association (combined P=3.95 × 10(-14)), although the association of SNP rs3782889 doesn't remain statistically significant after adjusting for SNP rs11066015 (proxy SNP with BRAP (r(2)=1)). But new possible CAD-associated variant was observed for rs9508025 (FLT1), even though its statistical significance did marginally reach at the genome-wide a significance level (combined P=6.07 × 10(-7)). This study shows that three CAD susceptibility loci, which were previously identified in European can be directly replicated in Koreans and also provides additional evidences implicating suggestive loci as risk variants for CAD in East Asian.