Conducting polymers (CPs) have received much attention in both fundamental and practical studies because they have electrical and electrochemical properties similar to those of both traditional semiconductors and metals. CPs possess excellent characteristics such as mild synthesis and processing conditions, chemical and structural diversity, tunable conductivity, and structural flexibility. Advances in nanotechnology have allowed the fabrication of versatile CP nanomaterials with improved performance for various applications including electronics, optoelectronics, sensors, and energy devices. The aim of this review is to explore the conductivity mechanisms and electrical and electrochemical properties of CPs and to discuss the factors that significantly affect these properties. The size and morphology of the materials are also discussed as key parameters that affect their major properties. Finally, the latest trends in research on electrochemical capacitors and sensors are introduced through an in-depth discussion of the most remarkable studies reported since 2003.

No abstract

Numerous viruses, including influenza virus, measles virus, Hantavirus, adenovirus, herpesviruses, varicella-zoster virus, cytomegalovirus, and Epstein-Barr virus, can cause lower respiratory tract infection in adults. Viral pneumonia in adults can be classified into two clinical groups: so-called atypical pneumonia in otherwise healthy hosts and viral pneumonia in immunocompromised hosts. Influenza virus types A and B cause most cases of viral pneumonia in immunocompetent adults. Immunocompromised hosts are susceptible to pneumonias caused by cytomegalovirus, herpesviruses, measles virus, and adenovirus. The radiographic findings, which consist mainly of patchy or diffuse ground-glass opacity with or without consolidation and reticular areas of increased opacity, are variable and overlapping. Computed tomographic findings, which are also overlapping, consist of poorly defined centrilobular nodules, ground-glass attenuation with a lobular distribution, segmental consolidation, or diffuse ground-glass attenuation with thickened interlobular septa. The radiologic findings reflect the variable extents of the histopathologic features: diffuse alveolar damage (intraalveolar edema, fibrin, and variable cellular infiltrates with a hyaline membrane), intraalveolar hemorrhage, and interstitial (intrapulmonary or airway) inflammatory cell infiltration. Clinical information such as patient age, immune status, community outbreaks, symptom onset and duration, and presence of a rash remain important aids in diagnosis of viral causes.

A facile way to synthesize nanometer-sized polymer (polypyrrole, PPy) particles is explored on the basis of the formation of complexes between water-soluble polymers and metal cations in aqueous solution. The metal cation is used as an oxidizing agent to initiate the chemical oxidation polymerization of the corresponding monomer, and the water-soluble polymer effectively provides a steric stability for the growth of polymer nanoparticles during the polymerization process. Light-scattering analyses are performed to give insight into the behavior of the complexes in aqueous solution. In addition, major physical parameters affecting the formation of polymer nanoparticles are investigated, including hydrodynamic radius, radius of gyration, shape factor, and viscosity. By judicious control of these parameters, PPy nanoparticles with narrow size distribution can be readily fabricated in large quantities. It is also possible to control the diameter of the nanoparticles by changing critical synthetic variables. Importantly, PPy nanoparticles of approximately 20-60 nm in diameter can be prepared without using any surfactants or specific templates; this novel strategy offers great possibility for mass production of polymer nanoparticles.

Polyaniline (PANI) is one of the most widely investigated conducting polymers and is considered to be of practical use for many future applications. Here, we first demonstrate that the anisotropic growth of PANI at the nanometer scale can be kinetically controlled by employing a polymeric stabilizer, poly(N-vinylpyrrolidone). The polymerization rate became slower in the presence of the stabilizer (the rate constants calculated at the initial stage decreased with increasing concentration of the stabilizer), yielding PANI nanostructures with lower aspect ratios. Therefore, it is believed that the stabilizer sterically restricts the directional fiber growth mechanism governing PANI chain growth in aqueous solution. Three PANI nanostructures, specifically nanospheres, nanorods, and nanofibers, were fabricated and their oxidation/protonation levels were investigated systematically. It was found that the nanofibers had the most outstanding oxidation/protonation level accompanied by structural ordering (note that the only difference between the polymerization conditions in each case was the concentration of the stabilizer). We also examine the electrochemical properties of PANI nanostructure electrodes in three-electrode and two-electrode (actual capacitor cell) configurations. The intrinsic charge-transport ability of individual nanostructures strongly affected the electrochemical properties of the electrodes. Briefly, the nanofiber electrode had faster electrode kinetics and better capacitance than the nanorods and nanospheres. Lastly, an extrinsic factor, the interparticle contact resistance, also turned out to noticeably influence the capacitances of the electrodes.

Owing to their promising applications in electronic and optoelectronic devices, conducting polymers have been continuously studied during the past few decades. Nevertheless, only limited progress had been made in conducting‐polymer‐based sensors until nanostructured conducting polymers were demonstrated for high‐performance signal transducers. Significant advances in the synthesis of conducting‐polymer nanomaterials have been recently reported, with enhanced sensitivity relative to their bulk counterparts. Today, conducting‐polymer nanomaterials rival metal and inorganic semiconductor nanomaterials in sensing capability. However, there are still several technological challenges to be solved for practical sensor applications of conducting‐polymer nanomaterials. Here, the key issues on conducting‐polymer nanomaterials in the development of state‐of‐the‐art sensors are discussed. Furthermore, a perspective on next‐generation sensor technology from a materials point of view is also given.

Abstract1D poly(3,4‐ethylenedioxythiophene) (PEDOT) nanomaterials, including ellipsoidal nanoparticles, nanorods, and nanotubes, are fabricated via chemical oxidation polymerization in reverse (water‐in‐oil) microemulsions. The reverse cylindrical micelles are prepared with sodium bis(2‐ethylhexyl) sulfosuccinate (AOT) and aqueous FeCl3 solution in hexane. The morphology of the final products is determined by carefully tuning the degree of oxidation potential at the micelle surface. Notably, the fabrication of gram‐scale amounts of products is possible under optimized synthetic conditions, suggesting that this methodology is appropriate for the large‐scale production of the corresponding nanomaterials. The as‐prepared PEDOT nanomaterials are applied to the precise detection of alcohol vapors. The chemical sensors based on the PEDOT nanomaterials present excellent reversibility and reproducibility in response.

Tailoring the morphology of materials in the nanometer regime is vital to realizing enhanced device performance. Here, we demonstrate flexible nerve agent sensors, based on hydroxylated poly(3,4-ethylenedioxythiophene) (PEDOT) nanotubes (HPNTs) with surface substructures such as nanonodules (NNs) and nanorods (NRs). The surface substructures can be grown on a nanofiber surface by controlling critical synthetic conditions during vapor deposition polymerization (VDP) on the polymer nanotemplate, leading to the formation of multidimensional conducting polymer nanostructures. Hydroxyl groups are found to interact with the nerve agents. Representatively, the sensing response of dimethyl methylphosphonate (DMMP) as a simulant for sarin is highly sensitive and reversible from the aligned nanotubes. The minimum detection limit is as low as 10 ppt. Additionally, the sensor had excellent mechanical bendability and durability.