The rapid cadence of MOSFET scaling is stimulating the development of new technologies and accelerating the introduction of new semiconducting materials as silicon alternative. In this context, 2D materials with a unique layered structure have attracted tremendous interest in recent years, mainly motivated by their ultra-thin body nature and unique optoelectronic and mechanical properties. The development of scalable synthesis techniques is obviously a fundamental step towards the development of a manufacturable technology. Metal-organic chemical vapor deposition has recently been used for the synthesis of large area TMDs, however, an important milestone still needs to be achieved: the ability to precisely control the number of layers and surface uniformity at the nano-to micro-length scale to obtain an atomically flat, self-passivated surface. In this work, we explore various fundamental aspects involved in the chemical vapor deposition process and we provide important insights on the layer-dependence of epitaxial MoS film's structural properties. Based on these observations, we propose an original method to achieve a layer-controlled epitaxy of wafer-scale TMDs.

No abstract

For the integration of two-dimensional (2D) transition metal dichalcogenides (TMDC) with high-performance electronic systems, one of the greatest challenges is the realization of doping and comprehension of its mechanisms. Low-temperature atomic layer deposition of aluminum oxide is found to n-dope MoS2 and ReS2 but not WS2. Based on electrical, optical, and chemical analyses, we propose and validate a hypothesis to explain the doping mechanism. Doping is ascribed to donor states in the band gap of Al x O y , which donate electrons or not, based on the alignment of the electronic bands of the 2D TMDC. Through systematic experimental characterization, incorporation of impurities (e.g., carbon) is identified as the likely cause of such states. By modulating the carbon concentration in the capping oxide, doping can be controlled. Through systematic and comprehensive experimental analysis, this study correlates, for the first time, 2D TMDC doping to the carbon incorporation on dielectric encapsulation layers. We highlight the possibility to engineer dopant layers to control the material selectivity and doping concentration in 2D TMDC.

No abstract

The increasing scientific and industry interest in 2D MX 2 materials within the field of nanotechnology has made the single crystalline integration of large area van der Waals (vdW) layers on commercial substrates an important topic. The c-plane oriented (3D crystal) sapphire surface is believed to be an interesting substrate candidate for this challenging 2D/3D integration. Despite the many attempts that have been made, the yet incomplete understanding of vdW epitaxy still results in synthetic material that shows a crystallinity far too low compared to natural crystals that can be exfoliated onto commercial substrates. Thanks to its atomic control and in situ analysis possibilities, molecular beam epitaxy (MBE) offers a potential solution and an appropriate method to enable a more in-depth understanding of this peculiar 2D/3D hetero-epitaxy. Here, we report on how various sapphire surface reconstructions, that are obtained by thermal annealing of the as-received substrates, influence the vdW epitaxy of the MBE-grown WSe 2 monolayers (MLs). The surface chemistry and the interatomic arrangement of the reconstructed sapphire surfaces are shown to control the preferential in-plane epitaxial alignment of the stoichiometric WSe 2 crystals. In addition, it is demonstrated that the reconstructions also affect the in-plane lattice parameter and thus the inplane strain of the 2D vdW-bonded MLs. Hence, the results obtained in this work shine more light on the peculiar concept of vdW epitaxy, especially relevant for 2D materials integration on large-scale 3D crystal commercial substrates.

Controlled covalent functionalization of MoS2 by chemical reduction.

Using transmission electron microscopy we investigate the influence of AlSb monolayers and substrate surface preparation on the microstructure of GaSb grown on GaAs ͑001͒ by molecular beam epitaxy. The geometric phase analysis method is used to analyze the interface dislocation type and the residual strain, as well as the dislocation core behavior versus the thickness of the AlSb interface layer. A quantitative measurement of the local Burgers vectors shows that the misfit dislocations at the GaSb/GaAs interface are always 60°dislocations. They are arranged in pairs which are more or less distant. For the samples with the lower threading dislocation density, the average distance between the 60°pairs is smaller, the interface is flatter and the local strain is more relieved. These results show that understanding the atomic structure of interfaces may be of great help in improving the quality of GaSb grown on GaAs substrates.

The cleaning of two-dimensional (2D) materials is an essential step in the fabrication of future devices, leveraging their unique physical, optical, and chemical properties. Part of these emerging 2D materials are transition metal dichalcogenides (TMDs). So far there is limited understanding of the cleaning of “monolayer” TMD materials. In this study, we report on the use of downstream H2 plasma to clean the surface of monolayer WS2 grown by MOCVD. We demonstrate that high-temperature processing is essential, allowing to maximize the removal rate of polymers and to mitigate damage caused to the WS2 in the form of sulfur vacancies. We show that low temperature in situ carbonyl sulfide (OCS) soak is an efficient way to resulfurize the material, besides high-temperature H2S annealing. The cleaning processes and mechanisms elucidated in this work are tested on back-gated field-effect transistors, confirming that transport properties of WS2 devices can be maintained by the combination of H2 plasma cleaning and OCS restoration. The low-damage plasma cleaning based on H2 and OCS is very reproducible, fast (completed in a few minutes) and uses a 300 mm industrial plasma etch system qualified for standard semiconductor pilot production. This process is, therefore, expected to enable the industrial scale-up of 2D-based devices, co-integrated with silicon technology.