Penelitian ini bertujuan untuk mengetahui penggunaan software Autodesk® Revit® dan Autodesk® Naviswork® Manage untuk pekerjaan Quantity Take-Off dan menganalisa perbedaan hasil perhitungan QTO berbasis Building Information Modeling dan QTO manual. Studi kasus penelitian adalah Data Perencanaan Gedung Bappeda Kota Padang. Penelitian dilakukan dengan membuat BIM Model Gedung tersebut berdasarkan Detail Engineering Design. Selanjutnya dilakukan review model dengan tools Clash Detection pada Autodesk® Naviswork® Manage, selanjutnya BIM Model tersebut dihitung volumenya. Hasil perhitungannya kemudian dibandingkan dan dianalisa. Hasil penelitian menunjukan bahwa ada beberapa kelebihan dan kekurangan dalam penggunaan software tersebut untuk pekerjaan QTO. Item pekerjaan arsitektur yang dihitung sebanyak 146 item pekerjaan, ditemukan 88 pekerjaan sesuai dengan volume manual, 4 pekerjaan hampir sesuai dengan volume manual, 10 pekerjaan tidak sesuai dengan volume manual dan 44 pekerjaan tidak dapat dihitung. Item pekerjaan stuktur yang dihitung sebanyak 122 item pekerjaan, ditemukan 113 pekerjaan sesuai dengan volume manual, 2 pekerjaan hampir sesuai dengan volume manual, 6 pekerjaan tidak sesuai dengan volume manual dan 1 pekerjaan tidak dapat dihitung.
The covid-19 pandemic had struck the world and affected the national development, especially in Indonesia. Many construction sectors experience disruption; therefore, it directly impacts the contractor’s performance. This study analyzes the internal and external dominant factors that affect the contractor’s performance during the covid-19 pandemic in West Sumatra Province, Indonesia. This study was a cross-sectional study with a qualitative approach using a self-administered questionnaire with 26 variables. Fifty eights respondents in the water resources field projects have participated in this study. The data was collected and analyzed by using multivariate analysis (logistic regression test). It was concluded that the distribution of salaries on the managerial aspect becomes dominant in the internal factor. Government policy factors regarding the implementation of work outside become the crucial external factor that significantly affects the contractor’s performance. So, it is suggested to the well-organized distribution of salaries and well preparation of conditional administration related to government policies during the Covid-19 pandemic.
The problem of flooding or flash floods in watersheds often occurs, both in large rivers and small rivers. The frequency of occurrence varies greatly depending on the local climate. As a result of flooding, it causes more erosion and collapse of riverbanks and washes away all kinds of materials, such as wood, sand, and stone. Sometimes it also submerges rice fields, villages, and houses downstream of the river. Likewise, in the study location of the Limau Manih river, there has been a flood with a large discharge. It was recorded twice a year, namely in July and September 2012. One of the ways to reduce energy, scour, and avalanches on riverbanks is by building a check dam or weir. A check dam is expected to reduce the energy that arises due to differences in elevation or slope of the river channel. But on the other hand, the weir will raise the water level, so that the puddle becomes wider. Therefore, it is necessary to study the impact of weir construction on the extent of inundation. The study was conducted using ArcGIS to map inundation and HEC-RAS to simulate water levels along the river. Simulations were carried out for several return periods of rainfall events. The results of the study show that the planned flood discharge in the river of Limau Manih watershed is quite large. Meanwhile, from the simulation results, the inundation area is not too significant with the increase in the return period and the planned flood discharge. Although the simulation of the weir without widening the upstream part of the weir shows a significant increase in inundation area. This is most likely due to the weir in the upstream area of the river which is rather steep, so that water flows quickly through the overflow of the weir. However, the water level in the weir is higher than without the weir, as a result, water jumps and erosion occur downstream of the weir. For this reason, it is very necessary to monitor the scour behavior in the weir and the sedimentation rate, because this area has the potential to be eroded.
Bukit Barisan dengan hutan yang masih asli dan curah hujan yang cukup tinggi menjadikan provinsi Sumatera Barat umumnya dan Pasaman Barat khususnya mempunyai banyak daerah aliran sungai (DAS) yang dapat mengalirkan air melalui sungai/batang hingga bermuara di lautan Indonesia. Akan tetapi perubahan fungsi hutan dan iklim menyebabkan debit air yang diprediksi mampu mengairi areal pertanian seluas 10.000 ha di daerah irigasi Batang Bayang pada kenyataannya tidak dapat terpenuhi. Pada makalah ini akan dikaji kemampuan DAS Batang Bayang dan Batang Sikabau masing-masingnya. Kemudian kedua DASini diintegrasikan, sehingga debit andalan yang terjadiakan lebih besar. Untuk menggabungkan debit air dari dua DAS dilakukan dengan metode suplesi, yakni membuat saluran yang menghubungkan Batang Sikabau ke saluran induk di DI Batang Bayang. Hasil kajian menunjukan bahwa areal irigasi Batang Bayang dapat diairi lebih dari 5.140,20ha untuk tanaman padi dan lebih dari 41.956,36 hauntuk palawija. Diharapkan dampak secara tidak langsung dari saluran suplesi akan mengurangi debit banjir di Batang Sikabau bagian hilir.Kata kunci : Integrasi, Batang, Bayang, Sikabau, Suplesi.
Redaman adalah fenomena yang ada dalam setiap struktur, fenomena tersebut dapat mengurangi getaran yang disebabkan oleh kekuatan eksternal untuk diterapkan sistem struktur. Berbagai jenis peredam telah dikenal dewasa ini, salah satunya adalah Tuned Mass Damper (TMD) dimana sistem ini menerapkan konsep kontrol pada struktur. Tulisan ini menyajikan studi efektifitas TMD yang dipasang pada struktur gedung bangunan tinggi. Pemasangan TMD pada struktur biasanya adalah pada bangunan-bangunan tinggi dengan layout berbentuk bujursangkar. Oleh karena itu dalam tulisan ini akan dikaji efektifitas pemakaian TMD bila digunakan pada bangunan tinggi dengan layout berbentuk ″U″. Respons struktur yang pelajari adalah gaya dalam, deformasi dan perioda dari struktur tanpa dan dengan TMD pada bangunan 40 lantai. Massa TMD ditetapkan sebesar 1%, 2%, dan 3% dari massa struktur utamanya. Tipe TMD dibagi 2 (dua), terdiri dari 1 TMD (Single TMD) dan 2 TMD (Multi TMD) yang diletakkan di lantai paling atas bangunan gedung. Hasil studi menunjukkan bahwa umumnya respons struktur dapat teredam oleh TMD dan penggunaan Single TMD lebih efektif dari pada Multi TMD pada bangunan tinggi dengan layout bangunan berbentuk ″U″. Keywords: redaman, bangunan tinggi, TMD, beban gempa, deformasi, perioda.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.