Beam self-imaging in nonlinear graded-index multimode optical fibers is of interest for many applications, such as implementing a fast saturable absorber mechanism in fiber lasers via multimode interference. We obtain a new exact solution for the nonlinear evolution of first and second order moments of a laser beam of arbitrary transverse shape carried by a graded-index multimode fiber. We have experimentally directly visualized the longitudinal evolution of beam self-imaging by means of femtosecond laser pulse propagation in both the anomalous and the normal dispersion regime of a standard telecom graded-index multimode optical fiber. Light scattering out of the fiber core via visible photo-luminescence emission permits us to directly measure the self-imaging period and the beam dynamics. Spatial shift and splitting of the self-imaging process under the action of self-focusing are also revealed.
Progress in MEMS technology continuously stimulates new developments in the mechanical structure of micro systems, such as, for example, the concept of so-called CSFH (conjugate surfaces flexural hinge), which makes it possible, simultaneously, to minimize the internal stresses and to increase motion range and robustness. Such a hinge may be actuated by means of a rotary comb-drive, provided that a proper set of simulations and tests are capable to assess its feasibility. In this paper, a CSFH has been analyzed with both theoretical and finite element (FEM) methods, in order to obtain the relation between voltage and generated torque. The FEM model considers also the fringe effect on the comb drive finger. Electromechanical couple–field analysis is performed by means of both direct and load transfer methods. Experimental tests have been also performed on a CSFH embedded in a MEMS prototype, which has been fabricated starting from a SOI wafer and using D–RIE (deep reactive ion etching). Results showed that CSFH performs better than linear flexure hinges in terms of larger rotations and less stress for given applied voltage.
This paper presents a new concept flexure hinge for MEMS applications and reveals how to design, construct, and experimentally test. This hinge combines a curved beam, as a flexible element, and a pair of conjugate surfaces, whose contact depends on load conditions. The geometry is conceived in such a way that minimum stress conditions are maintained within the flexible beam. A comparison of the new design with the other kind of revolute and flexible joints is presented. Then, the static behavior of the hinge is analyzed by means of a theoretical approach, based on continuum mechanics, and the results are compared to those obtained by means of finite element analysis (FEA) simulation. A silicon hinge prototype is also presented and the construction process, based on single step lithography and reactive ion etching (RIE) technology, is discussed. Finally, a crucial in–SEM experiment is performed and the experimental results are interpreted through the theoretical models.
Microrobots are used nowadays in several fields of application, specially in mini invasive surgery. However, they are rather difficult to be constructed, and the traditional micro machining tools are not adequate yet to built the smaller parts. The construction of the microrobots is even harder if more than one D.O.F. are required for the mechanism, because these systems are more complicated. This paper deals with the development of a 3 D.O.F. planar micro platform with remote system of actuation. The new approach of design and manufacturing is based on two innovative solutions: a) the adoption of the technologies used to built MEMS, Micro Electro Mechanical Systems; b) the introduction of new flexural hinge to develop compliant micro mechanisms. The new concept of flexural hinge is described in the paper, also from a theoretical point of view. Several example of possible structures are proposed and analyzed, together with their remote wire actuation systems. Finite Element Analysis (FEA) has been also adopted to analyze the system performance under small deformations. The principle of fabrication is, then, described. The process consists of a sequence of single steps which have allowed to achieved an overall maximum size down to 3-4 mm and the minimum thickness of the smaller components down to 50μm. © 2010 IEEE
Although tissue and cell manipulation nowadays is a common task in biomedical analysis, there are still many different ways to accomplish it, most of which are still not sufficiently general, inexpensive, accurate, efficient or effective. Several problems arise both for in vivo or in vitro analysis, such as the maximum overall size of the device and the gripper jaws (like in minimally-invasive open biopsy) or very limited manipulating capability, degrees of freedom or dexterity (like in tissues or cell-handling operations). This paper presents a new approach to tissue and cell manipulation, which employs a conceptually new conjugate surfaces flexure hinge (CSFH) silicon MEMS-based technology micro-gripper that solves most of the above-mentioned problems. The article describes all of the phases of the development, including topology conception, structural design, simulation, construction, actuation testing and in vitro observation. The latter phase deals with the assessment of the function capability, which consists of taking a series of in vitro images by optical microscopy. They offer a direct morphological comparison between the gripper and a variety of tissues.
The number of studies on microgrippers has increased consistently in the past decade, among them the numeric simulations and material characterization are quite common, while the metrological issues related to their performance testing are not well investigated yet. To add some contribution in this field, an image analysis-based method for microgrippers displacement measurement and testing is proposed here: images of a microgripper prototype supplied with different voltages are acquired by an optical system (i.e., a 3D optical profilometer) and processed through in-house software. With the aim to assess the quality of the results a systematic approach is proposed for determining and quantifying the main error sources and applied to the uncertainty estimation in angular displacement measurements of the microgripper comb-drives. A preliminary uncertainty evaluation of the in-house software is provided by a Monte Carlo Simulation and its contribution added to that of the other error sources, giving an estimation of the relative uncertainty up to 3.6% at 95% confidence level for voltages from 10 V to 28 V. Moreover, the measurements on the prototype device highlighted a stable behavior in the voltage range from 0 V to 28 V with a maximum rotation of 1.3° at 28 V, which is lower than in previous studies, likely due to differences in system configuration, model, and material. Anyway, the proposed approach is suitable also for different optical systems (i.e., trinocular microscopes).
A new plane parallel micro-manipulator is presented in this paper, together with the numerical procedure that has been used in order to optimize some kinetostatic performance indices, among which the kinematic condition number and the mechanical advantage. The approach is based on a refined simplification of the direct kinematic problem and it is applied to the pseudo-rigid body model of the original compliant mechanism, with an acceptable approximation. The method has been iterated several times to evaluate a fitness function that has been used by an Evolutionary Method of computation for the search of global optimum, namely, a Genetic Algorithm. The results will be used for refining the geometric design of the parallel micro-manipulator, which will be built by means of MEMS-Based technologies in silicon. © 2013 IEEE
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.