Biomass represents an abundant carbon-neutral renewable resource for the production of bioenergy and biomaterials, and its enhanced use would address several societal needs. Advances in genetics, biotechnology, process chemistry, and engineering are leading to a new manufacturing concept for converting renewable biomass to valuable fuels and products, generally referred to as the biorefinery. The integration of agroenergy crops and biorefinery manufacturing technologies offers the potential for the development of sustainable biopower and biomaterials that will lead to a new manufacturing paradigm.

Ground lignocellulosic biomass (Miscanthus giganteus, pine (Pinus sylvestris) and willow (Salix viminalis)) was pretreated with ionic liquid-water mixtures of 1-butyl-3-methylimidazolium methyl sulfate and 1-butyl-3-methylimidazolium hydrogen sulfate. A solid fraction enriched in cellulose was recovered, which was subjected to enzymatic hydrolysis. Up to 90% of the glucose and 25% of the hemicellulose contained in the original biomass were released by the combined ionic liquid pretreatment and the enzymatic hydrolysis. After the pretreatment, the ionic liquid liquor contained the majority of the lignin and the hemicellulose. The lignin portion was partially precipitated from the liquor upon dilution with water. The amount of hemicellulose monomers in the ionic liquid liquor and their conversion into furfurals was also examined. The performance of ionic liquid-water mixtures containing 1,3-dialkylimidazolium ionic liquids with acetate, methanesulfonate, trifluoromethanesulfonate and chloride anions was investigated. The applicability of the ionic liquid 1-butylimidazolium hydrogensulfate for lignocellulose pretreatment was also examined. It was found that ionic liquid liquors containing methyl sulfate, hydrogen sulfate and methanesulfonate anions were most effective in terms of lignin/cellulose fractionation and enhancement of cellulose digestibility.

Packaging waste forms a significant part of municipal solid waste and has caused increasing environmental concerns, resulting in a strengthening of various regulations aimed at reducing the amounts generated. Among other materials, a wide range of oil-based polymers is currently used in packaging applications. These are virtually all non-biodegradable, and some are difficult to recycle or reuse due to being complex composites having varying levels of contamination. Recently, significant progress has been made in the development of biodegradable plastics, largely from renewable natural resources, to produce biodegradable materials with similar functionality to that of oil-based polymers. The expansion in these bio-based materials has several potential benefits for greenhouse gas balances and other environmental impacts over whole life cycles and in the use of renewable, rather than finite resources. It is intended that use of biodegradable materials will contribute to sustainability and reduction in the environmental impact associated with disposal of oil-based polymers.The diversity of biodegradable materials and their varying properties makes it difficult to make simple, generic assessments such as biodegradable products are all 'good' or petrochemical-based products are all 'bad'. This paper discusses the potential impacts of biodegradable packaging materials and their waste management, particularly via composting. It presents the key issues that inform judgements of the benefits these materials have in relation to conventional, petrochemicalbased counterparts. Specific examples are given from new research on biodegradability in simulated 'home' composting systems. It is the view of the authors that biodegradable packaging materials are most suitable for single-use disposable applications where the post-consumer waste can be locally composted.

14.08.12 KB. Accepted version uploaded. Ok to add to Spiral, embargo period elapsed

Modern agriculture is heavily dependent on fossil resources. Both direct energy use for crop management and indirect energy use for fertilizers, pesticides and machinery production have contributed to the major increases in food production seen since the 1960s. However, the relationship between energy inputs and yields is not linear. Low-energy inputs can lead to lower yields and perversely to higher energy demands per tonne of harvested product. At the other extreme, increasing energy inputs can lead to ever-smaller yield gains. Although fossil fuels remain the dominant source of energy for agriculture, the mix of fuels used differs owing to the different fertilization and cultivation requirements of individual crops. Nitrogen fertilizer production uses large amounts of natural gas and some coal, and can account for more than 50 per cent of total energy use in commercial agriculture. Oil accounts for between 30 and 75 per cent of energy inputs of UK agriculture, depending on the cropping system. While agriculture remains dependent on fossil sources of energy, food prices will couple to fossil energy prices and food production will remain a significant contributor to anthropogenic greenhouse gas emissions. Technological developments, changes in crop management, and renewable energy will all play important roles in increasing the energy efficiency of agriculture and reducing its reliance of fossil resources.

No abstract

An isolation method with mild mechanical agitation and no acidic extraction step from a mushroom substrate resulted in chitin nanofibers (ChNFs) with large shares of retained glucans (50–65%). The subsequent chitin nanopapers exhibited exceptionally high tensile strengths of >200 MPa and moduli of ca. 7 GPa, which were largely attributed to the preserved glucans in the mixture, imparting a composite nature to the nanopapers. The isolation method for ChNFs is notably different from the conventional process with crustacean chitin sources that do not incorporate glucans and where an acidic extraction step for the removal of minerals must always be included.

A compositional analysis was performed on Buddleja davidii to determine its general biomass characteristics and provide detailed analysis of the chemical structures of its cellulose and lignin using NMR. B. davidii is a new potential lignocellulosic bioresource for producing bioethanol because it has several attractive agroenergy features. The biomass composition of B. davidii is 30% lignin, 35% cellulose, and 34% hemicellulose. Solid-state CP/MAS (13)C NMR showed that 33% of the cellulose is para-crystalline and 41% is at inaccessible surfaces. Both quantitative (13)C and (31)P NMR were used to examine the structure of lignin. The lignin was determined to be guaiacyl and syringyl with an h:g:s ratio of 0:81:19.