Application of mesoporous silica nanoparticles (MSNs) as antifouling/antibacterial carriers is limited and specifically with a dual synergetic effect. In the present work, MSNs modified with quaternary ammonium salts (QASs) and loaded with the biocide Parmetol S15 were synthesized as functional fillers for antifouling/antibacterial coatings. From the family of the MSNs, MCM-48 was selected as a carrier because of its cubic pore structure, high surface area, and high specific pore volume. The QASs used for the surface modification of MCM-48 were dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride and dimethyltetradecyl[3-(triethoxysilyl)propyl]ammonium chloride. The QAS-modified MCM-48 reveals strong covalent bonds between the QAS and the surface of the nanoparticles. The surface functionalization was confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, and ζ-potential measurements. Additional loading of the QAS-modified MCM-48 with a commercially available biocide (Parmetol S15) resulted in a synergetic dual antibacterial/antifouling effect. Either loaded or unloaded QAS-modified MSNs exhibited high antibacterial performance confirming their dual activity. The QAS-modified MCM-48 loaded with the biocide Parmetol S15 killed all exposed bacteria after 3 h of incubation and presented 100% reduction at the antibacterial tests against Gram-negative and Gram-positive bacteria. Furthermore, the QAS-modified MCM-48 without Parmetol S15 presented 77-89% reduction against the exposed Gram-negative bacteria and 78-94% reduction against the exposed Gram-positive bacteria. In addition, the modified MCM-48 was mixed with coating formulations, and its antifouling performance was assessed in a field test trial in northern Red Sea. All synthesized paints presented significant antifouling properties after 5 months of exposure in real seawater conditions, and the dual antifouling effect of the nanoparticles was confirmed.

Microbial keratitis is a serious sight threatening infection affecting approximately two million individuals worldwide annually. While antibiotic eye drops remain the gold standard treatment for these infections, the significant problems associated with eye drop drug delivery and the alarming rise in antimicrobial resistance has meant that there is an urgent need to develop alternative treatments. In this work, a nitric oxide releasing contact lens gel displaying broad spectrum antimicrobial activity against two of the most common causative pathogens of microbial keratitis is described. The contact lens gel is composed of poly-ε-lysine (pεK) functionalized with nitric oxide (NO) releasing diazeniumdiolate moieties which enables the controlled and sustained release of bactericidal concentrations of NO at physiological pH over a period of 15 h. Diazeniumdiolate functionalization was confirmed by Fourier transform infrared (FTIR), and the concentration of NO released from the gels was determined by chemiluminescence. The bactericidal efficacy of the gels against Pseudomonas aeruginosa and Staphylococcus aureus was ascertained, and between 1 and 4 log reductions in bacterial populations were observed over 24 h. Additional cell cytotoxicity studies with human corneal epithelial cells (hCE-T) also demonstrated that the contact lens gels were not cytotoxic, suggesting that the developed technology could be a viable alternative treatment for microbial keratitis.

No abstract

No abstract

Silane modification has been proposed as a powerful biomaterial surface modification tool. This is the first comprehensive investigation into the effect of silane chain length on the resultant properties of -NH silane monolayers and the associated osteoinductive properties of the surface. A range of -NH presenting silanes, chain length 3-11, were introduced to glass coverslips and characterized using water contact angles, atomic force microscopy, X-ray photoelectron spectroscopy, and Ninhydrin assays. The ability of the variation in chain length to form a homogenous layer across the entirety of the surfaces was also assessed. The osteoinductive potential of the resultant surfaces was evaluated by real-time polymerase chain reaction, immunocytochemistry, and von Kossa staining. Control of surface chemistry and topography was directly associated with changes in chain length. This resulted in the identification of a specific, chain length 11 (CL11) which significantly increased the osteoinductive properties of the modified materials. Only CL11 surfaces had a highly regular nano-topography/roughness which resulted in the formation of an appetite-like layer on the surface that induced a significantly enhanced osteoinductive response (increased expression of osteocalcin, CBFA1, sclerostin, and the production of a calcified matrix) across the entirety of the surface. © 2018 The Authors Journal of Biomedical Materials Research Part A Published by Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1862-1877, 2018.

An investigation of potential photosensitive protecting groups for diazeniumdiolates (R2N-N(O)=NO-) has been initiated, and here the effect of meta electron-donating groups on the photochemistry of O2-benzyl-substituted diazeniumdiolates (R2N-N(O)=NOCH2Ar) is reported. Photolysis of the parent benzyl derivative (Ar = Ph) results almost exclusively in undesired photochemistry-the formation of nitrosamine and an oxynitrene intermediate with very little, if any, photorelease of the diazeniumdiolate. We have been able to use meta substitution to tune the photochemistry of these benzylic systems. The desired diazeniumdiolate photorelease has been shown to become more substantial with stronger pi-donating meta substituents. This effect has been verified by direct observation of the photoreleased diazeniumdiolate with 1H NMR spectroscopy and by NO quantification measurements conducted in high- and low-pH solutions. In addition, the observed rates of NO release are consistent with that expected for normal thermal decomposition of the diazeniumdiolate in aqueous solutions and also show the same pH dependence.

Enriching a biomaterial surface with specific chemical groups has previously been considered for producing surfaces that influence cell response. Silane layer deposition has previously been shown to control mesenchymal stem cell adhesion and differentiation. However, it has not been used to investigate neuronal or Schwann cell responses in vitro to date. We report on the deposition of aminosilane groups for peripheral neurons and Schwann cells studying two chain lengths: (a) 3‐aminopropyl triethoxysilane (short chain‐SC) and (b) 11‐aminoundecyltriethoxysilane (long chain‐LC) by coating glass substrates. Surfaces were characterised by water contact angle, AFM and XPS. LC–NH2 was produced reproducibly as a homogenous surface with controlled nanotopography. Primary neuron and NG108‐15 neuronal cell differentiation and primary Schwann cell responses were investigated in vitro by S100β, p75, and GFAP antigen expression. Both amine silane surface supported neuronal and Schwann cell growth; however, neuronal differentiation was greater on LC aminosilanes versus SC. Thus, we report that silane surfaces with an optimal chain length may have potential in peripheral nerve repair for the modification and improvement of nerve guidance devices.

The linker-free covalent immobilization of polymers on surfaces has the potential to impart new properties and functions to surfaces for a wide range of applications.