To improve the thermal conductivity of epoxy resin, tensile way was used to orient the molecular chain of epoxy resin with SiO 2 particles filled. In this article, SiO 2 /Epoxy composites which had approximately onedimensional lattice structure were prepared. The heat generated by LED chip rapidly passed along the direction of the one-dimensional orientation in SiO 2 /Epoxy composites. The results showed that the thermal conductivity of oriented composites increased with the increase of silica concentration and draw ratio (If S is the cross-sectional areas of composites at the mold outlet, S 0 is the cross-sectional areas of composites after molding set, and draw ratio is S/S 0 ). With the addition of 50 wt% SiO 2 to the epoxy resin, the thermal conductivity of oriented SiO 2 /Epoxy composites with the draw ratio of 4 was 0.873 W/m K, which was 2.55 times that of unoriented SiO 2 /Epoxy composites. And a thermal conductivity, 5.97 times that of the epoxy resin, was obtained with 80 wt% SiO 2 and the draw ratio of 4. Nevertheless, the relative permittivities of epoxy composites which had 50 wt% SiO 2 with the draw ratio of 4 are stable with increasing frequency. POLYM. COMPOS., 37:818-823,
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.