No abstract

No abstract

No abstract

No abstract

Sc-doped aluminum nitride is emerging as a new piezoelectric material which can substitute undoped aluminum nitride (AlN) in radio-frequency MEMS applications, thanks to its demonstrated enhancement of the piezoelectric coefficients. Furthermore, the recent demonstration of the ferroelectric-switching capability of the material gives AlScN the possibility to integrate memory functionalities in RF components. However, its high-coercive field and high-leakage currents are limiting its applicability. Residual stress, growth on different substrates, and testing-temperature have already been demonstrated as possible knobs to flatten the energy barrier needed for switching, but no investigation has been reported yet on the whole impact on the dielectric and ferroelectric dynamic behavior of a single process parameter. In this context, we analyze the complete spectrum of variations induced by the applied substrate-RF, from deposition characteristics to dielectric and ferroelectric properties, proving its effect on all of the material attributes. In particular, we demonstrate the possibility of engineering the AlScN lattice cell to properly modify leakage, breakdown, and coercive fields, as well as polarization charge, without altering the crystallinity level, making substrate-RF an effective and efficient fabrication knob to ease the limitations the material is facing.

No abstract

The increasing use of mobile broadband requires new acoustic filtering technologies that can operate efficiently at frequencies above 6 GHz. Previous research has shown that AlN Super High Frequency (SHF) Cross-Sectional Lamé Mode resonators (CLMRs) can address this challenge, but their performance is limited by the piezoelectric strength of AlN. In this work, we explore the use of substitutional doping of Al in AlN with Sc to enhance the kt2 values of SHF CLMRs. Our results showed that the measured kt2·Qm product of Al72Sc28N CLMRs was four times greater than that of AlN CLMRs operating at the same frequency. Additionally, the measured fractional bandwidth (FWB) of Al72Sc28N 2nd order ladder filters was 4.13%, a fourfold improvement over AlN filters with the same design. We also discuss other aspects of the technology, such as power handling, losses, and spurious mode suppression, and identify potential areas for future research.

No abstract