No abstract

The experiment have been performed using samples of welded joints of the three components aluminium alloy AlMg4,5Mn. The welding was performed with GTAW in the shielded atmosphere of Ar+0,015N2, mixture of the inert gases Ar+50%He+0,015N2 and Ar+70%He+0,015N2. After welding has been completed, the metallographic tests, the tensile test and the tests of the hardness were performed. Also, the weld metal toughness was estimated, using the instrumental Charpy impact testing system, followed by estimating the crack initiation energy, crack growth energy and the fracture mechanics parameters. The goal was to establish the effects of shielding atmosphere composition on the mechanical properties and fracture mechanics parameters of weld metal

No abstract

In the hotel industry, it is a well-known fact that, despite of quality and variety of services provided, there is a low probability that the guests will return. This research is focused on identifying the basic factors of the hotel offer, which could determine the influence on the correlation between the guests' satisfaction and the probability of their return. The objective of the article is to explore the relationship between the guests' satisfaction with the quality hotel services in total (including the tourist offer of the place) and the probability of his return to the same destination. The questionnaire method was applied in the survey, and the data were analysed based on factor analysis. Thereafter, the model for forecasting the probability of the guests returning to the destination was established, by using the example of Montenegrin tourism. The model represents a defined framework for the guest's decision-making process. It identifies two main characteristics of guest experiences: satisfaction and rated quality (of the destination's overall hotel service and tourist offer). The same model evaluates the impact of the above factors on the probability of the guests' returning to the same destination. The starting hypothesis was the existence of a high degree of correlation between the guests' satisfaction (with the destination's hotel services and tourist offer) and the probability of returning to the selected Montenegrin destinations. The research confirmed the above-mentioned hypothesis. The results have revealed that there are significant differences in perceived quality, i.e. satisfaction between the target groups of Eastern and Western European tourists. JEL classification:L83.

This paper deals with a three-component aluminum alloy AlMg4.5Mn that was welded using a GTAW process in the shielded atmosphere of Ar+70%He+0.015%N2. The weld-metal toughness was evaluated at three different temperatures using instrumental Charpy pendulum impact testing to measure not only the total energy, but also the crack initiation energy and the crack growth energy. Fractographic analysis of the fracture surfaces and EDS analysis of large second-phase particles on fractured surfaces at each temperature were also carried out. Fractographic analysis at different temperatures indicated a clearly distinguishable fracture mechanism. It was inferred that the absorbed energy was closely correlated with the fracturing of surfaces. Moreover, it was concluded that with decrease in the amount of microscopic voids and dimples, the total energy absorbed also decreased.

No abstract

Testing were carried out on two steels. The first was microalloyed with Nb and second with Ti, Nb and V. The impact toughness of weld metals of these steels was evaluated using an instrumented Charpy pendulum. Five different gas mixtures (Ar, CO2, O2) were used to determine the optimal gas shielded metal arc process for both steels. The oxygen equivalent was used as a representative parameter of a mixture to follow, in particularly, its effect on the microstructure, toughness and crack propagation energy of the weld metal. For these investigated steels, the optimum gas mixture was established (5%CO2, 0.91%O2, balance Ar), which provided the maximum crack propagation energy, due to the microstructure which consisted dominantly of acicular ferrite.

The problems related to welding of the high strength steel, aimed for manufacturing of welded structures operating in the prominent wear conditions, is considered in this paper. The paper presents an analysis of possibilities and prescribing the technology for welding the high strength steel HARDOX 450. The methodology for estimate the weldability of this steel was established in the theoretical part of the paper, as well as calculations of the welding parameters, while the hardness was investigated in details and the macro and micro structures of the individual welded joint zones were estimated in the experimental part. Obtained experimental results could be usefully applied for selecting and establishing the optimal welding technology for structures made of this steel. The technology thus established and the GMAW welding regime can enable successful execution of the welded joints and reduce the possibility for appearance of flaws and cracks to a minimum.